About eCos
Supported Hardware
Downloading and Installation
Documentation
FAQ
Mailing lists
Problems
Licensing
Anonymous CVS
Contributions and Development Projects
Legal
The Motorola MPC8260 VADS Development Platform platform, based on the Motorola MPC8260 is supported by RedBoot. [an error occurred while processing this directive] This port is currently considered to be of Alpha quality only at this time.
[an error occurred while processing this directive]The support for this platform was contributed to eCos, and the eCos maintainers are grateful on behalf of the open source community to all contributors. Note that some contributed ports may not have been tested.
[an error occurred while processing this directive]Device drivers are included for:
Hardware is available from:
Motorola, Inc.
tel +1 (800) 5216274
Contact URL:
http://e-www.motorola.com/webapp/sps/site/homepage.jsp?nodeId=0M10Xv6c0C
Source code for RedBoot is available publically from [an error occurred while processing this directive] the anonymous CVS repository only.
Specifications are available for the [an error occurred while processing this directive] architecture and [an error occurred while processing this directive] processor and [an error occurred while processing this directive] platform and are available on-line from the manufacturer's web site.
[an error occurred while processing this directive]Instructions for installing RedBoot on the VADS can be found in the RedBoot User's Guide. [an error occurred while processing this directive] Board specific instructions, including installation instructions can be found here within the User's Guide.
[an error occurred while processing this directive]Instructions for installing and using eCos on the VADS are available here.
The most recent version of the full documentation set may be found on-line here.
[an error occurred while processing this directive]Prebuilt binaries of RedBoot are available for download for both ROM and RAM startup. Some necessary support files may also be included. Consult the RedBoot documentation on how to use these binaries.
Thanks to Patrick Doyle for the initial work on this platform