BCM2712 is a new quad-core 64-bit Arm Cortex-A76 processor from Broadcom, clocked at 2.4GHz, with 512KB per-core L2 caches, and a 2MB shared L3 cache. Cortex-A76 is three microarchitectural generations beyond Cortex-A72, a better manufacturing process makes a faster Raspberry Pi 5 with lower power consumption.

An updated VideoCore hardware video scaler (HVS) is capable of driving two simultaneous 4Kp60 HDMI displays, up from single 4Kp60 or dual 4Kp30 on Raspberry Pi 4.

RP1 is the I/O controller designed for Raspberry Pi 5, provides two USB 3.0 and two USB 2.0 interfaces; a Gigabit Ethernet controller; two four-lane MIPI transceivers for camera and display; analogue video output; 3.3V general-purpose I/O (GPIO); and the usual collection of GPIO-multiplexed low-speed interfaces (UART, SPI, I2C, I2S, and PWM). A four-lane PCI Express 2.0 interface provides a 16Gb/s link back to BCM2712.

DA9091 is a power-management IC (PMIC) of the chipset. This integrates eight separate switch-mode power supplies to generate the various voltages required by the board, including a quad-phase core supply, capable of providing 20 amps of current to power the Cortex-A76 cores and other digital logic in BCM2712.

2 ×ばつ 4-lane MIPI DSI/CSI port, compatible with CSI-2 camera and DSI display

Adapting PCIe 2.0 interface via FPC connector, supports high-speed peripherals

Onboard power button for power on/off without disconnecting power adapter

Onboard RTC battery header for connecting external battery (the battery is not included)

Onboard fan header, compatible with Active Cooler for Raspberry Pi 5

Onboard UART header designed for Raspberry Pi Debug probe

Memory indication markers for easy board RAM identification

Raspberry Pi 5 Case

Active Cooler

27W USB-C Power Supply

PoE + Module

M.2 HAT

Camera/Display FPC cable

RTC Battery

More