<?php
/**
* strings.php
*
* This code provides various string manipulation functions that are
* used by the rest of the SquirrelMail code.
*
* @copyright 1999-2020 The SquirrelMail Project Team
* @license http://opensource.org/licenses/gpl-license.php GNU Public License
* @version $Id: strings.php 14845 2020年01月07日 08:09:34Z pdontthink $
* @package squirrelmail
*/
/**
* Appends citation markers to the string.
* Also appends a trailing space.
*
* @author Justus Pendleton
* @param string $str The string to append to
* @param int $citeLevel the number of markers to append
* @return null
* @since 1.5.1
*/
for ($i = 0; $i < $citeLevel; $i++) {
$str .= '>';
}
if ($citeLevel != 0) {
$str .= ' ';
}
}
/**
* Create a newline in the string, adding citation
* markers to the newline as necessary.
*
* @author Justus Pendleton
* @param string $str the string to make a newline in
* @param int $citeLevel the citation level the newline is at
* @param int $column starting column of the newline
* @return null
* @since 1.5.1
*/
$str .= "\n";
$column = 0;
if ($citeLevel > 0) {
$column = $citeLevel + 1;
} else {
$column = 0;
}
}
/**
* Checks for spaces in strings - only used if PHP doesn't have native ctype support
*
* You might be able to rewrite the function by adding short evaluation form.
*
* possible problems:
* - iso-2022-xx charsets - hex 20 might be part of other symbol. I might
* be wrong. 0x20 is not used in iso-2022-jp. I haven't checked iso-2022-kr
* and iso-2022-cn mappings.
*
* - no-break space ( ) - it is 8bit symbol, that depends on charset.
* there are at least three different charset groups that have nbsp in
* different places.
*
* I don't see any charset/nbsp options in php ctype either.
*
* @param string $string tested string
* @return bool true when only whitespace symbols are present in test string
* @since 1.5.1
*/
if ( preg_match ('/^[\x09-\x0D]|^\x20/', $string) ||
$string==
'') { return true;
} else {
return false;
}
}
/**
* Wraps text at $wrap characters. While sqWordWrap takes
* a single line of text and wraps it, this function works
* on the entire corpus at once, this allows it to be a little
* bit smarter and when and how to wrap.
*
* @author Justus Pendleton
* @param string $body the entire body of text
* @param int $wrap the maximum line length
* @return string the wrapped text
* @since 1.5.1
*/
//check for ctype support, and fake it if it doesn't exist
}
}
// the newly wrapped text
$outString = '';
// current column since the last newline in the outstring
$outStringCol = 0;
// where we are in the original string
$pos = 0;
// the number of >>> citation markers we are currently at
$citeLevel = 0;
// the main loop, whenever we start a newline of input text
// we start from here
while ($pos < $length) {
// we're at the beginning of a line, get the new cite level
$newCiteLevel = 0;
while (($pos <
$length) &&
(sq_substr ($body,$pos,1) ==
'>')) { $newCiteLevel++;
$pos++;
// skip over any spaces interleaved among the cite markers
while (($pos <
$length) &&
(sq_substr ($body,$pos,1) ==
' ')) {
$pos++;
}
if ($pos >= $length) {
break;
}
}
// special case: if this is a blank line then maintain it
// (i.e. try to preserve original paragraph breaks)
// unless they occur at the very beginning of the text
$outStringLast =
$outString{sq_strlen ($outString) -
1}; if ($outStringLast != "\n") {
$outString .= "\n";
}
$outString .= "\n";
$pos++;
$outStringCol = 0;
continue;
}
// if the cite level has changed, then start a new line
// with the new cite level.
if (($citeLevel != $newCiteLevel) && ($pos > ($newCiteLevel + 1)) && ($outStringCol != 0)) {
}
$citeLevel = $newCiteLevel;
// prepend the quote level if necessary
if ($outStringCol == 0) {
// if we added a citation then move the column
// out by citelevel + 1 (the cite markers + the space)
$outStringCol = $citeLevel + ($citeLevel ? 1 : 0);
} else if ($outStringCol > $citeLevel) {
// not a cite and we're not at the beginning of a line
// in the output. add a space to separate the new text
// from previous text.
$outString .= ' ';
$outStringCol++;
}
// find the next newline -- we don't want to go further than that
$nextNewline =
sq_strpos ($body, "\n", $pos); if ($nextNewline === FALSE) {
$nextNewline = $length;
}
// Don't wrap unquoted lines at all. For now the textarea
// will work fine for this. Maybe revisit this later though
// (for completeness more than anything else, I think)
if ($citeLevel == 0) {
$outString .=
sq_substr ($body, $pos, ($nextNewline -
$pos)); $outStringCol = $nextNewline - $pos;
if ($nextNewline != $length) {
}
$pos = $nextNewline + 1;
continue;
}
/**
* Set this to false to stop appending short strings to previous lines
*/
$smartwrap = true;
// inner loop, (obviously) handles wrapping up to
// the next newline
while ($pos < $nextNewline) {
// skip over initial spaces
$pos++;
}
// if this is a short line then just append it and continue outer loop
if (($outStringCol + $nextNewline - $pos) <= ($wrap - $citeLevel - 1) ) {
// if this is the final line in the input string then include
// any trailing newlines
// echo substr($body,$pos,$wrap). "<br />";
if (($nextNewline +
1 ==
$length) &&
(sq_substr ($body,$nextNewline,1) ==
"\n")) { $nextNewline++;
}
// trim trailing spaces
$lastRealChar = $nextNewline;
while (($lastRealChar >
$pos &&
$lastRealChar <
$length) &&
(ctype_space (sq_substr ($body,$lastRealChar,1)))) { $lastRealChar--;
}
// decide if appending the short string is what we want
if (($nextNewline <
$length &&
sq_substr ($body,$nextNewline,1) ==
"\n") &&
isset($lastRealChar)) {
$mypos = $pos;
//check the first word:
while (($mypos <
$length) &&
(sq_substr ($body,$mypos,1) ==
'>')) { $mypos++;
// skip over any spaces interleaved among the cite markers
while (($mypos <
$length) &&
(sq_substr ($body,$mypos,1) ==
' ')) { $mypos++;
}
}
/*
$ldnspacecnt = 0;
if ($mypos == $nextNewline+1) {
while (($mypos < $length) && ($body{$mypos} == ' ')) {
$ldnspacecnt++;
}
}
*/
//if ($dowrap || $ldnspacecnt > 1 || ($firstword && (
if (!$smartwrap || $firstword && (
$firstword{0} == '-' ||
$firstword{0} == '+' ||
$firstword{0} == '*' ||
$outString .=
sq_substr ($body,$pos,($lastRealChar -
$pos+
1)); $outStringCol += ($lastRealChar - $pos);
$nextNewline++;
$pos = $nextNewline;
$outStringCol--;
continue;
}
}
$outString .=
sq_substr ($body, $pos, ($lastRealChar -
$pos +
1)); $outStringCol += ($lastRealChar - $pos);
$pos = $nextNewline + 1;
continue;
}
$eol = $pos + $wrap - $citeLevel - $outStringCol;
// eol is the tentative end of line.
// look backwards for there for a whitespace to break at.
// if it's already less than our current position then
// our current line is already too long, break immediately
// and restart outer loop
if ($eol <= $pos) {
continue;
}
// start looking backwards for whitespace to break at.
$breakPoint = $eol;
$breakPoint--;
}
// if we didn't find a breakpoint by looking backward then we
// need to figure out what to do about that
if ($breakPoint == $pos) {
// if we are not at the beginning then end this line
// and start a new loop
if ($outStringCol > ($citeLevel + 1)) {
continue;
} else {
// just hard break here. most likely we are breaking
// a really long URL. could also try searching
// forward for a break point, which is what Mozilla
// does. don't bother for now.
$breakPoint = $eol;
}
}
// special case: maybe we should have wrapped last
// time. if the first breakpoint here makes the
// current line too long and there is already text on
// the current line, break and loop again if at
// beginning of current line, don't force break
$SLOP = 6;
if ((($outStringCol + ($breakPoint - $pos)) > ($wrap + $SLOP)) && ($outStringCol > ($citeLevel + 1))) {
continue;
}
// skip newlines or whitespace at the beginning of the string
$substring =
sq_substr ($body, $pos, ($breakPoint -
$pos)); $substring =
rtrim ($substring); // do rtrim and ctype_space have the same ideas about whitespace? $outString .= $substring;
// advance past the whitespace which caused the wrap
$pos = $breakPoint;
$pos++;
}
if ($pos < $length) {
}
}
}
return $outString;
}
/**
* Wraps text at $wrap characters
*
* Has a problem with special HTML characters, so call this before
* you do character translation.
*
* Specifically, &#039; comes up as 5 characters instead of 1.
* This should not add newlines to the end of lines.
*
* @param string $line the line of text to wrap, by ref
* @param int $wrap the maximum line lenth
* @param string $charset name of charset used in $line string. Available since v.1.5.1.
* @return void
* @since 1.0
*/
function sqWordWrap (&$line, $wrap, $charset=
'') {
// Use custom wrapping function, if translation provides it
if (isset($languages[$squirrelmail_language]['XTRA_CODE']) &&
function_exists ($languages[$squirrelmail_language]['XTRA_CODE'] .
'_wordwrap')) { $line =
call_user_func ($languages[$squirrelmail_language]['XTRA_CODE'] .
'_wordwrap', $line, $wrap); return;
}
}
preg_match ('/^([\t >]*)([^\t >].*)?$/', $line, $regs); $beginning_spaces = $regs[1];
if (isset($regs[2])) {
} else {
$words = array();
}
$i = 0;
$line = $beginning_spaces;
while ($i <
count ($words)) { /* Force one word to be on a line (minimum) */
$line .= $words[$i];
$line_len =
strlen ($beginning_spaces) +
sq_strlen ($words[$i],$charset) +
2; if (isset($words[$i + 1]))
$line_len +=
sq_strlen ($words[$i +
1],$charset); $i ++;
/* Add more words (as long as they fit) */
while ($line_len <
$wrap &&
$i <
count ($words)) { $line .= ' ' . $words[$i];
$i++;
if (isset($words[$i]))
$line_len +=
sq_strlen ($words[$i],$charset) +
1; else
$line_len += 1;
}
/* Skip spaces if they are the first thing on a continued line */
while (!isset
($words[$i]) &&
$i <
count ($words)) { $i ++;
}
/* Go to the next line if we have more to process */
if ($i <
count ($words)) { $line .= "\n";
}
}
}
/**
* Does the opposite of sqWordWrap()
* @param string $body the text to un-wordwrap
* @return void
* @since 1.0
*/
global $squirrelmail_language;
if ($squirrelmail_language == 'ja_JP') {
return;
}
$body = '';
$PreviousSpaces = '';
for ($i = 0; $i < $cnt; $i ++) {
preg_match ("/^([\t >]*)([^\t >].*)?$/", $lines[$i], $regs); $CurrentSpaces = $regs[1];
if (isset($regs[2])) {
$CurrentRest = $regs[2];
} else {
$CurrentRest = '';
}
if ($i == 0) {
$PreviousSpaces = $CurrentSpaces;
$body = $lines[$i];
} else if (($PreviousSpaces == $CurrentSpaces) /* Do the beginnings match */
&&
(strlen ($lines[$i -
1]) >
65) /* Over 65 characters long */ &&
strlen ($CurrentRest)) { /* and there's a line to continue with */ $body .= ' ' . $CurrentRest;
} else {
$body .= "\n" . $lines[$i];
$PreviousSpaces = $CurrentSpaces;
}
}
$body .= "\n";
}
/**
* If $haystack is a full mailbox name and $needle is the mailbox
* separator character, returns the last part of the mailbox name.
*
* @param string haystack full mailbox name to search
* @param string needle the mailbox separator character
* @return string the last part of the mailbox name
* @since 1.0
*/
if ($needle == '') {
$elem = $haystack;
} else {
$parts =
explode ($needle, $haystack); while ($elem ==
'' &&
count ($parts)) { }
}
return( $elem );
}
/**
* get_location
*
* Determines the location to forward to, relative to your server.
* This is used in HTTP Location: redirects.
*
* If set, it uses $config_location_base as the first part of the URL,
* specifically, the protocol, hostname and port parts. The path is
* always autodetected.
*
* @return string the base url for this SquirrelMail installation
* @since 1.0
*/
$is_secure_connection, $sq_ignore_http_x_forwarded_headers;
/* Get the path, handle virtual directories */
} else {
}
// proto+host+port are already set in config:
if ( !empty($config_location_base) ) {
return $config_location_base . $path ;
}
// we computed it before, get it from the session:
return $full_url . $path;
}
// else: autodetect
/* Check if this is a HTTPS or regular HTTP request. */
$proto = 'http://';
if ($is_secure_connection)
$proto = 'https://';
/* Get the hostname from the Host header or server config. */
if ($sq_ignore_http_x_forwarded_headers
|| empty($host)) {
$host = '';
}
}
}
$port = '';
// Note: HTTP_X_FORWARDED_PROTO could be sent from the client and
// therefore possibly spoofed/hackable. Thus, SquirrelMail
// ignores such headers by default. The administrator
// can tell SM to use such header values by setting
// $sq_ignore_http_x_forwarded_headers to boolean FALSE
// in config/config.php or by using config/conf.pl.
global $sq_ignore_http_x_forwarded_headers;
if ($sq_ignore_http_x_forwarded_headers
$forwarded_proto = '';
if (($server_port != 80 && $proto == 'http://') ||
($server_port != 443 && $proto == 'https://' &&
$port =
sprintf (':%d', $server_port); }
}
}
/* this is a workaround for the weird macosx caching that
* causes Apache to return 16080 as the port number, which causes
* SM to bail */
if ($imap_server_type == 'macosx' && $port == ':16080') {
$port = '';
}
/* Fallback is to omit the server name and use a relative */
/* URI, although this is not RFC 2616 compliant. */
$full_url = ($host ? $proto . $host . $port : '');
return $full_url . $path;
}
/**
* Get Message List URI
*
* @param string $mailbox Current mailbox name (unencoded/raw)
* @param string $startMessage The mailbox page offset
* @param string $what Any current search parameters (OPTIONAL;
* default empty string)
*
* @return string The message list URI
*
* @since 1.5.2
*
*/
global $base_uri;
$list_xtra = "?where=read_body.php&what=$what&mailbox=" . $urlMailbox.
"&startMessage=$startMessage";
return $base_uri .'src/right_main.php'. $list_xtra;
}
/**
* Encrypts password
*
* These functions are used to encrypt the password before it is
* stored in a cookie. The encryption key is generated by
* OneTimePadCreate();
*
* @param string $string the (password)string to encrypt
* @param string $epad the encryption key
* @return string the base64-encoded encrypted password
* @since 1.0
*/
// make sure that pad is longer than string
$pad.=$pad;
}
} else {
// FIXME: what should we do when $epad is not base64 encoded or empty.
}
$encrypted = '';
for ($i =
0; $i <
strlen ($string); $i++
) { $encrypted .=
chr (ord ($string[$i]) ^
ord ($pad[$i])); }
}
/**
* Decrypts a password from the cookie
*
* Decrypts a password from the cookie, encrypted by OneTimePadEncrypt.
* This uses the encryption key that is stored in the session.
*
* @param string $string the string to decrypt
* @param string $epad the encryption key from the session
* @return string the decrypted password
* @since 1.0
*/
// make sure that pad is longer than string
$pad.=$pad;
}
} else {
// FIXME: what should we do when $epad is not base64 encoded or empty.
}
$decrypted = '';
for ($i =
0; $i <
strlen ($encrypted); $i++
) { $decrypted .=
chr (ord ($encrypted[$i]) ^
ord ($pad[$i])); }
return $decrypted;
}
/**
* Creates encryption key
*
* Creates an encryption key for encrypting the password stored in the cookie.
* The encryption key itself is stored in the session.
*
* Pad must be longer or equal to encoded string length in 1.4.4/1.5.0 and older.
* @param int $length optional, length of the string to generate
* @return string the encryption key
* @since 1.0
*/
$pad = '';
for ($i = 0; $i < $length; $i++) {
}
}
/**
* Returns a string showing a byte size figure in
* a more easily digested (readable) format
*
* @param int $bytes the size in bytes
*
* @return string The size in human readable format
*
* @since 1.0
*
*/
$bytes /= 1024;
if ($bytes / 1024 > 1) {
$bytes /= 1024;
}
if ($bytes < 10) {
$bytes *= 10;
$bytes /= 10;
} else {
}
global $nbsp;
return $bytes . $nbsp . $type;
}
/**
* Generates a random string from the character set you pass in
*
* @param int $size the length of the string to generate
* @param string $chars a string containing the characters to use
* @param int $flags a flag to add a specific set to the characters to use:
* Flags:
* 1 = add lowercase a-z to $chars
* 2 = add uppercase A-Z to $chars
* 4 = add numbers 0-9 to $chars
* @return string the random string
* @since 1.0
*/
if ($flags & 0x1) {
$chars .= 'abcdefghijklmnopqrstuvwxyz';
}
if ($flags & 0x2) {
$chars .= 'ABCDEFGHIJKLMNOPQRSTUVWXYZ';
}
if ($flags & 0x4) {
$chars .= '0123456789';
}
if (($size <
1) ||
(strlen ($chars) <
1)) { return '';
}
$String = '';
while (strlen ($String) <
$size) { $String .=
$chars{mt_rand (0, $j)}; }
return $String;
}
/**
* Escapes special characters for use in IMAP commands.
*
* @param string $str the string to escape
* @return string the escaped string
* @since 1.0.3
*/
return str_replace (array('\\', '"'), array('\\\\', '\\"'), $str); }
/**
* Create compose link
*
* Returns a link to the compose-page, taking in consideration
* the compose_in_new and javascript settings.
*
* @param string $url The URL to the compose page
* @param string $text The link text, default "Compose"
* @param string $target URL target, if any (since 1.4.3)
* @param string $accesskey The access key to be used, if any
*
* @return string a link to the compose page
*
* @since 1.4.2
*/
function makeComposeLink ($url, $text =
null, $target=
'', $accesskey=
'NONE') { global $compose_new_win, $compose_width,
$compose_height, $oTemplate;
if(!$text) {
}
// if not using "compose in new window", make
// regular link and be done with it
if($compose_new_win != '1') {
}
// build the compose in new window link...
// if javascript is on, use onclick event to handle it
"comp_in_new('$compuri','$compose_width','$compose_height')",
'', '', '',
($accesskey == 'NONE'
? array()
: array('accesskey' => $accesskey)));
}
// otherwise, just open new window using regular HTML
}
/**
* version of fwrite which checks for failure
* @param resource $fp
* @param string $string
* @return number of written bytes. false on failure
* @since 1.4.3
*/
// write to file
$count =
@fwrite ($fp,$string); // the number of bytes written should be the length of the string
if($count !=
strlen ($string)) { return FALSE;
}
return $count;
}
/**
* sq_get_html_translation_table
*
* Returns the translation table used by sq_htmlentities()
*
* @param integer $table html translation table. Possible values (without quotes):
* <ul>
* <li>HTML_ENTITIES - full html entities table defined by charset</li>
* <li>HTML_SPECIALCHARS - html special characters table</li>
* </ul>
* @param integer $quote_style quote encoding style. Possible values (without quotes):
* <ul>
* <li>ENT_COMPAT - (default) encode double quotes</li>
* <li>ENT_NOQUOTES - don't encode double or single quotes</li>
* <li>ENT_QUOTES - encode double and single quotes</li>
* </ul>
* @param string $charset charset used for encoding. default to us-ascii, 'auto' uses $default_charset global value.
* @return array html translation array
* @since 1.5.1
*/
if ($table == HTML_SPECIALCHARS) $charset='us-ascii';
// Start array with ampersand
$sq_html_ent_table = array( "&" => '&' );
// < and >
array("<" => '<',
">" => '>')
);
// double quotes
if ($quote_style == ENT_COMPAT)
array("\"" => '"')
);
// double and single quotes
if ($quote_style == ENT_QUOTES)
array("\"" => '"',
"'" => ''')
);
if ($charset=='auto') $charset=$default_charset;
// add entities that depend on charset
switch($charset){
case 'iso-8859-1':
include_once(SM_PATH .
'functions/htmlentities/iso-8859-1.php'); break;
case 'utf-8':
include_once(SM_PATH .
'functions/htmlentities/utf-8.php'); break;
case 'us-ascii':
default:
break;
}
// return table
return $sq_html_ent_table;
}
/**
* sq_htmlentities
*
* Convert all applicable characters to HTML entities.
* Minimal php requirement - v.4.0.5.
*
* Function is designed for people that want to use full power of htmlentities() in
* i18n environment.
*
* @param string $string string that has to be sanitized
* @param integer $quote_style quote encoding style. Possible values (without quotes):
* <ul>
* <li>ENT_COMPAT - (default) encode double quotes</li>
* <li>ENT_NOQUOTES - don't encode double or single quotes</li>
* <li>ENT_QUOTES - encode double and single quotes</li>
* </ul>
* @param string $charset charset used for encoding. defaults to 'us-ascii', 'auto' uses $default_charset global value.
* @return string sanitized string
* @since 1.5.1
*/
function sq_htmlentities ($string,$quote_style=
ENT_COMPAT,$charset=
'us-ascii') { // get translation table
// convert characters
}
/**
* Tests if string contains 8bit symbols.
*
* If charset is not set, function defaults to default_charset.
* $default_charset global must be set correctly if $charset is
* not used.
* @param string $string tested string
* @param string $charset charset used in a string
* @return bool true if 8bit symbols are detected
* @since 1.5.1 and 1.4.4
*/
if ($charset=='') $charset=$default_charset;
/**
* Don't use 240円 in ranges. Sometimes RH 7.2 doesn't like it.
* Don't use 200円-237円 for iso-8859-x charsets. This range
* stores control symbols in those charsets.
* Use preg_match instead of ereg in order to avoid problems
* with mbstring overloading
*/
$needle='/240円|[241円-377円]/';
} else {
$needle='/[200円-237円]|240円|[241円-377円]/';
}
}
/**
* Replacement of mb_list_encodings function
*
* This function provides replacement for function that is available only
* in php 5.x. Function does not test all mbstring encodings. Only the ones
* that might be used in SM translations.
*
* Supported strings are stored in session in order to reduce number of
* mb_internal_encoding function calls.
*
* If you want to test all mbstring encodings - fill $list_of_encodings
* array.
* @return array list of encodings supported by php mbstring extension
* @since 1.5.1 and 1.4.6
*/
return array();
// php 5+ function
return $ret;
}
// don't try to test encodings, if they are already stored in session
return $mb_supported_encodings;
// save original encoding
$list_of_encoding=array(
'pass',
'auto',
'ascii',
'jis',
'utf-8',
'sjis',
'euc-jp',
'iso-8859-1',
'iso-8859-2',
'iso-8859-7',
'iso-8859-9',
'iso-8859-15',
'koi8-r',
'koi8-u',
'big5',
'gb2312',
'gb18030',
'windows-1251',
'windows-1255',
'windows-1256',
'tis-620',
'iso-2022-jp',
'euc-cn',
'euc-kr',
'euc-tw',
'uhc',
'utf7-imap');
$supported_encodings=array();
foreach ($list_of_encoding as $encoding) {
// try setting encodings. suppress warning messages
$supported_encodings[]=$encoding;
}
// restore original encoding
// register list in session
return $supported_encodings;
}
/**
* Callback function used to lowercase array values.
* @param string $val array value
* @param mixed $key array key
* @since 1.5.1 and 1.4.6
*/
}
/**
* Function returns number of characters in string.
*
* Returned number might be different from number of bytes in string,
* if $charset is multibyte charset. Detection depends on mbstring
* functions. If mbstring does not support tested multibyte charset,
* vanilla string length function is used.
* @param string $str string
* @param string $charset charset
* @since 1.5.1 and 1.4.6
* @return integer number of characters in string
*/
// default option
// lowercase charset name
// use automatic charset detection, if function call asks for it
if ($charset=='auto') {
$charset=$default_charset;
if ($squirrelmail_language=='ja_JP') $charset='euc-jp';
}
// Use mbstring only with listed charsets
$aList_of_mb_charsets=array('utf-8','big5','gb2312','gb18030','euc-jp','euc-cn','euc-tw','euc-kr');
// calculate string length according to charset
} else {
// own strlen detection code is removed because missing strpos,
// strtoupper and substr implementations break string wrapping.
}
return $real_length;
}
/**
* string padding with multibyte support
*
* @link http://www.php.net/str_pad
* @param string $string original string
* @param integer $width padded string width
* @param string $pad padding symbols
* @param integer $padtype padding type
* (internal php defines, see str_pad() description)
* @param string $charset charset used in original string
* @return string padded string
*/
function sq_str_pad ($string, $width, $pad, $padtype, $charset=
'') {
$padded_string = '';
switch ($charset) {
case 'utf-8':
case 'big5':
case 'gb2312':
case 'euc-kr':
/*
* all multibyte charsets try to increase width value by
* adding difference between number of bytes and real length
*/
default:
$padded_string=
str_pad ($string,$width,$pad,$padtype); }
return $padded_string;
}
/**
* Wrapper that is used to switch between vanilla and multibyte substr
* functions.
* @param string $string
* @param integer $start
* @param integer $length
* @param string $charset
* @return string
* @since 1.5.1
* @link http://www.php.net/substr
* @link http://www.php.net/mb_substr
*/
function sq_substr ($string,$start,$length=
NULL,$charset=
'auto') {
// if $length is NULL, use the full string length...
// we have to do this to mimick the use of substr()
// where $length is not given
//
// use automatic charset detection, if function call asks for it
static $charset_auto, $bUse_mb;
if ($charset=='auto') {
if (!isset($charset_auto)) {
$charset=$default_charset;
if ($squirrelmail_language=='ja_JP') $charset='euc-jp';
$charset_auto = $charset;
} else {
$charset = $charset_auto;
}
}
// in_array call is expensive => do it once and use a static var for
// storing the results
if (!isset($bUse_mb)) {
$bUse_mb = true;
} else {
$bUse_mb = false;
}
}
if ($bUse_mb) {
return mb_substr ($string,$start,$length,$charset); }
// TODO: add mbstring independent code
// use vanilla string functions as last option
return substr ($string,$start,$length); }
/**
* This is a replacement for PHP's substr_replace() that is
* multibyte-aware.
*
* @param string $string The string to operate upon
* @param string $replacement The string to be inserted
* @param int $start The offset at which to begin substring replacement
* @param int $length The number of characters after $start to remove
* NOTE that if you need to specify a charset but
* want to achieve normal substr_replace() behavior
* where $length is not specified, use NULL (OPTIONAL;
* default from $start to end of string)
* @param string $charset The charset of the given string. A value of NULL
* here will force the use of PHP's standard substr().
* (OPTIONAL; default is "auto", which indicates that
* the user's current charset should be used).
*
* @return string The manipulated string
*
* Of course, you can use more advanced (e.g., negative) values
* for $start and $length as needed - see the PHP manual for more
* information: http://www.php.net/manual/function.substr-replace.php
*
*/
$charset='auto')
{
// NULL charset? Just use substr_replace()
//
// use current character set?
//
if ($charset == 'auto')
{
//FIXME: is there any reason why this cannot be a global flag used by all string wrapper functions?
static $auto_charset;
if (!isset($auto_charset))
{
//FIXME - do we need this?
global $squirrelmail_language;
$auto_charset = $default_charset;
//FIXME - do we need this?
if ($squirrelmail_language == 'ja_JP') $auto_charset = 'euc-jp';
}
$charset = $auto_charset;
}
// standardize character set name
//
/* ===== FIXME: this list is not used in 1.5.x, but if we need it, unless this differs between all our string function wrappers, we should store this info in the session
// only use mbstring with the following character sets
//
$sq_substr_replace_mb_charsets = array(
'utf-8',
'big5',
'gb2312',
'gb18030',
'euc-jp',
'euc-cn',
'euc-tw',
'euc-kr'
);
// now we can use our own implementation using
// mb_substr() and mb_strlen() if needed
//
if (in_array($charset, $sq_substr_replace_mb_charsets)
&& in_array($charset, sq_mb_list_encodings()))
===== */
//FIXME: is there any reason why this cannot be a global array used by all string wrapper functions?
{
$string_length =
mb_strlen ($string, $charset);
if ($start < 0)
$start =
max (0, $string_length +
$start);
else if ($start > $string_length)
$start = $string_length;
if ($length < 0)
$length =
max (0, $string_length -
$start +
$length);
else if (is_null ($length) ||
$length >
$string_length) $length = $string_length;
if ($start + $length > $string_length)
$length = $string_length - $start;
return mb_substr ($string, 0, $start, $charset) . $replacement
$start + $length,
$string_length, // FIXME: I can't see why this is needed: - $start - $length,
$charset);
}
// else use normal substr_replace()
//
}
/**
* Wrapper that is used to switch between vanilla and multibyte strpos
* functions.
* @param string $haystack
* @param mixed $needle
* @param integer $offset
* @param string $charset
* @return string
* @since 1.5.1
* @link http://www.php.net/strpos
* @link http://www.php.net/mb_strpos
*/
function sq_strpos ($haystack,$needle,$offset,$charset=
'auto') { // use automatic charset detection, if function call asks for it
static $charset_auto, $bUse_mb;
if ($charset=='auto') {
if (!isset($charset_auto)) {
$charset=$default_charset;
if ($squirrelmail_language=='ja_JP') $charset='euc-jp';
$charset_auto = $charset;
} else {
$charset = $charset_auto;
}
}
// in_array call is expensive => do it once and use a static var for
// storing the results
if (!isset($bUse_mb)) {
$bUse_mb = true;
} else {
$bUse_mb = false;
}
}
if ($bUse_mb) {
return mb_strpos ($haystack,$needle,$offset,$charset); }
// TODO: add mbstring independent code
// use vanilla string functions as last option
return strpos ($haystack,$needle,$offset); }
/**
* Wrapper that is used to switch between vanilla and multibyte strtoupper
* functions.
* @param string $string
* @param string $charset
* @return string
* @since 1.5.1
* @link http://www.php.net/strtoupper
* @link http://www.php.net/mb_strtoupper
*/
// use automatic charset detection, if function call asks for it
static $charset_auto, $bUse_mb;
if ($charset=='auto') {
if (!isset($charset_auto)) {
$charset=$default_charset;
if ($squirrelmail_language=='ja_JP') $charset='euc-jp';
$charset_auto = $charset;
} else {
$charset = $charset_auto;
}
}
// in_array call is expensive => do it once and use a static var for
// storing the results
if (!isset($bUse_mb)) {
$bUse_mb = true;
} else {
$bUse_mb = false;
}
}
if ($bUse_mb) {
}
// TODO: add mbstring independent code
// use vanilla string functions as last option
}
/**
* Counts 8bit bytes in string
* @param string $string tested string
* @return integer number of 8bit bytes
*/
$count=0;
for ($i=
0; $i<
strlen ($string); $i++
) { if (ord ($string[$i]) >
127) $count++
; }
return $count;
}
/**
* Callback function to trim whitespace from a value, to be used in array_walk
* @param string $value value to trim
* @since 1.5.2 and 1.4.7
*/
}
/**
* Truncates the given string so that it has at
* most $max_chars characters. NOTE that a "character"
* may be a multibyte character, or (optionally), an
* HTML entity , so this function is different than
* using substr() or mb_substr().
*
* NOTE that if $elipses is given and used, the returned
* number of characters will be $max_chars PLUS the
* length of $elipses
*
* @param string $string The string to truncate
* @param int $max_chars The maximum allowable characters
* @param string $elipses A string that will be added to
* the end of the truncated string
* (ONLY if it is truncated) (OPTIONAL;
* default not used)
* @param boolean $html_entities_as_chars Whether or not to keep
* HTML entities together
* (OPTIONAL; default ignore
* HTML entities)
*
* @return string The truncated string
*
* @since 1.4.20 and 1.5.2 (replaced truncateWithEntities())
*
*/
$html_entities_as_chars=FALSE)
{
// if the length of the string is less than
// the allowable number of characters, just
// return it as is (even if it contains any
// HTML entities, that would just make the
// actual length even smaller)
//
$actual_strlen =
sq_strlen ($string, 'auto'); if ($max_chars <= 0 || $actual_strlen <= $max_chars)
return $string;
// if needed, count the number of HTML entities in
// the string up to the maximum character limit,
// pushing that limit up for each entity found
//
$adjusted_max_chars = $max_chars;
if ($html_entities_as_chars)
{
// $loop_count is needed to prevent an endless loop
// which is caused by buggy mbstring versions that
// return 0 (zero) instead of FALSE in some rare
// cases. Thanks, PHP.
// see: http://bugs.php.net/bug.php?id=52731
// also: tracker 3053349ドル
//
$loop_count = 0;
$entity_pos = $entity_end_pos = -1;
while ($entity_end_pos + 1 < $actual_strlen
&&
($entity_pos =
sq_strpos ($string, '&', $entity_end_pos +
1)) !==
FALSE &&
($entity_end_pos =
sq_strpos ($string, ';', $entity_pos)) !==
FALSE && $entity_pos <= $adjusted_max_chars
&& $loop_count++ < $max_chars)
{
$adjusted_max_chars += $entity_end_pos - $entity_pos;
}
// this isn't necessary because sq_substr() would figure this
// out anyway, but we can avoid a sq_substr() call and we
// know that we don't have to add an elipses (this is now
// an accurate comparison, since $adjusted_max_chars, like
// $actual_strlen, does not take into account HTML entities)
//
if ($actual_strlen <= $adjusted_max_chars)
return $string;
}
// get the truncated string
//
$truncated_string =
sq_substr ($string, 0, $adjusted_max_chars);
// return with added elipses
//
return $truncated_string . $elipses;
}
/**
* Gathers the list of secuirty tokens currently
* stored in the user's preferences and optionally
* purges old ones from the list.
*
* @param boolean $purge_old Indicates if old tokens
* should be purged from the
* list ("old" is 2 days or
* older unless the administrator
* overrides that value using
* $max_token_age_days in
* config/config_local.php)
* (OPTIONAL; default is to always
* purge old tokens)
*
* @return array The list of tokens
*
* @since 1.4.19 and 1.5.2
*
*/
{
global $data_dir , $username, $max_token_age_days, $use_expiring_security_tokens;
$tokens =
getPref ($data_dir, $username, 'security_tokens', ''); $tokens = array();
// purge old tokens if necessary
//
if ($purge_old)
{
if (empty($max_token_age_days)) $max_token_age_days = 2;
$discard_token_date = $now - ($max_token_age_days * 86400);
$cleaned_tokens = array();
foreach ($tokens as $token => $timestamp)
if ($timestamp >= $discard_token_date)
$cleaned_tokens[$token] = $timestamp;
$tokens = $cleaned_tokens;
}
return $tokens;
}
/**
* Generates a security token that is then stored in
* the user's preferences with a timestamp for later
* verification/use (although session-based tokens
* are not stored in user preferences).
*
* NOTE: By default SquirrelMail will use a single session-based
* token, but if desired, user tokens can have expiration
* dates associated with them and become invalid even during
* the same login session. When in that mode, the note
* immediately below applies, otherwise it is irrelevant.
* To enable that mode, the administrator must add the
* following to config/config_local.php:
* $use_expiring_security_tokens = TRUE;
*
* NOTE: The administrator can force SquirrelMail to generate
* a new token every time one is requested (which may increase
* obscurity through token randomness at the cost of some
* performance) by adding the following to
* config/config_local.php: $do_not_use_single_token = TRUE;
* Otherwise, only one token will be generated per user which
* will change only after it expires or is used outside of the
* validity period specified when calling sm_validate_security_token()
*
* WARNING: If the administrator has turned the token system
* off by setting $disable_security_tokens to TRUE in
* config/config.php or the configuration tool, this
* function will not store tokens in the user
* preferences (but it will still generate and return
* a random string).
*
* @param boolean $force_generate_new When TRUE, a new token will
* always be created even if current
* configuration dictates otherwise
* (OPTIONAL; default FALSE)
*
* @return string A security token
*
* @since 1.4.19 and 1.5.2
*
*/
{
$use_expiring_security_tokens;
$max_generation_tries = 1000;
// if we're using session-based tokens, just return
// the same one every time (generate it if it's not there)
//
if (!$use_expiring_security_tokens)
{
return $token;
// create new one since there was none in session
return $token;
}
if (!$force_generate_new && !$do_not_use_single_token && !empty($tokens))
$count = 0;
while (isset($tokens[$new_token]))
{
if (++$count > $max_generation_tries)
{
logout_error (_ ("Fatal token generation error; please contact your system administrator or the SquirrelMail Team")); exit;
}
}
// is the token system enabled? CAREFUL!
//
if (!$disable_security_tokens)
{
$tokens[$new_token] =
time (); }
return $new_token;
}
/**
* Validates a given security token and optionally remove it
* from the user's preferences if it was valid. If the token
* is too old but otherwise valid, it will still be rejected.
*
* "Too old" is 2 days or older unless the administrator
* overrides that value using $max_token_age_days in
* config/config_local.php
*
* Session-based tokens of course are always reused and are
* valid for the lifetime of the login session.
*
* WARNING: If the administrator has turned the token system
* off by setting $disable_security_tokens to TRUE in
* config/config.php or the configuration tool, this
* function will always return TRUE.
*
* @param string $token The token to validate
* @param int $validity_period The number of seconds tokens are valid
* for (set to zero to remove valid tokens
* after only one use; set to -1 to allow
* indefinite re-use (but still subject to
* $max_token_age_days - see elsewhere);
* use 3600 to allow tokens to be reused for
* an hour) (OPTIONAL; default is to only
* allow tokens to be used once)
* NOTE this is unrelated to $max_token_age_days
* or rather is an additional time constraint on
* tokens that allows them to be re-used (or not)
* within a more narrow timeframe
* @param boolean $show_error Indicates that if the token is not
* valid, this function should display
* a generic error, log the user out
* and exit - this function will never
* return in that case.
* (OPTIONAL; default FALSE)
*
* @return boolean TRUE if the token validated; FALSE otherwise
*
* @since 1.4.19 and 1.5.2
*
*/
{
global $data_dir , $username, $max_token_age_days, $use_expiring_security_tokens,
// bypass token validation? CAREFUL!
//
if ($disable_security_tokens) return TRUE;
// if we're using session-based tokens, just compare
// the same one every time
//
if (!$use_expiring_security_tokens)
{
{
if (!$show_error) return FALSE;
logout_error (_ ("Fatal security token error; please log in again")); exit;
}
if ($token !== $session_token)
{
if (!$show_error) return FALSE;
logout_error (_ ("The current page request appears to have originated from an untrusted source.")); exit;
}
return TRUE;
}
// don't purge old tokens here because we already
// do it when generating tokens
//
// token not found?
//
if (empty($tokens[$token]))
{
if (!$show_error) return FALSE;
logout_error (_ ("This page request could not be verified and appears to have expired.")); exit;
}
$timestamp = $tokens[$token];
// whether valid or not, we want to remove it from
// user prefs if it's old enough (unless requested to
// bypass this (in which case $validity_period is -1))
//
if ($validity_period >= 0
&& $timestamp < $now - $validity_period)
{
unset($tokens[$token]);
}
// reject tokens that are too old
//
if (empty($max_token_age_days)) $max_token_age_days = 2;
$old_token_date = $now - ($max_token_age_days * 86400);
if ($timestamp < $old_token_date)
{
if (!$show_error) return FALSE;
logout_error (_ ("The current page request appears to have originated from an untrusted source.")); exit;
}
// token OK!
//
return TRUE;
}
/**
* Wrapper for PHP's htmlspecialchars() that
* attempts to add the correct character encoding
*
* @param string $string The string to be converted
* @param int $flags A bitmask that controls the behavior of htmlspecialchars()
* (See http://php.net/manual/function.htmlspecialchars.php )
* (OPTIONAL; default ENT_COMPAT, ENT_COMPAT | ENT_SUBSTITUTE for PHP >=5.4)
* @param string $encoding The character encoding to use in the conversion
* (OPTIONAL; default automatic detection)
* @param boolean $double_encode Whether or not to convert entities that are
* already in the string (only supported in
* PHP 5.2.3+) (OPTIONAL; default TRUE)
*
* @return string The converted text
*
*/
$encoding=NULL, $double_encode=TRUE)
{
if (!$encoding)
{
if ($default_charset == 'iso-2022-jp')
$default_charset = 'EUC-JP';
$encoding = $default_charset;
}
// Replace invalid characters with a symbol instead of returning
// empty string for the entire to be encoded string.
$flags = $flags | ENT_SUBSTITUTE;
}
}
}