On Wed, Apr 17, 2013 at 3:18 PM, <m.roth@xxxxxxxxx> wrote: > Doll, Margaret Ann wrote: > > I have two systems. One is a RH server at 2.6.32-358.2.1.el6.x86_64. > The > > other is a RH workstation at the same version. > > > > I have an array using a raid 5 setup which I formatted as ext4 on the > > server station. I did this from the udisk icon that appeared in the top > > panel of my computer screen. This program was extremely useful in that > it > > told me that one of the disks in the array was faulty. After I replaced > > the disk, I formated the array as ext4. I could mount /dev/sdc1 on the > > server. > > > > I then moved the array over to the workstation. > > udisksudisks-1.0.1-4.el6.x86_64 is installed on the workstation. However > > the udisk icon does not appear on the top panel even when I start > > "/usr/libexec/udisks-daemon &". > <snip> > I don't know udisks, but is this software RAID? If so, then you need the > drivers for it, and the workstation may not have that; in addition, > there's mdadm that you need to run to recognize the array. > > mark > I didn't have to run mdadm on the server. The raid is setup on the raid system itself through settings on the raid system. > -- > redhat-list mailing list > unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe > https://www.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:redhat-list-request@xxxxxxxxxx?subject=unsubscribe https://www.redhat.com/mailman/listinfo/redhat-list