On Tue, 2010年02月02日 at 15:40 -0500, Hugo wrote: > Folks, > > I am currently working with kernel 2.6.29.6-0.16.smp.gcc3.4.x86_64 . > Per this conversation: > > [Bonding-devel] [PATCH] bonding: fix multiple module load problem > http://lkml.indiana.edu/hypermail/linux/kernel/0906.1/01121.html > > , I would like to know how to correctly create multiple bonding > interfaces with different options / modes. > > Can anybody help me with that? > > I recently upgraded from kernel 2.6.26 which was working fine using > something like in modprobe.conf: > > install bond0 /sbin/modprobe --ignore-install bonding -o bond0 > mode=balance-alb miimon=100 > install bond1 /sbin/modprobe --ignore-install bonding -o bond1 > mode=balance-rr miimon=100 > > , unfortunately kernel 2.6.29 does not seem to like these and when I > test the bonding interfaces using just a ping, I got a kernel panic. > > Also, I have trying several different ways to configure the bonding > interface, but it is never stable. > Ping will work for 10 seconds, time out for another 0 or so and back > and forth. > > Any help / thoughts / comments will be greatly appreciated. What distro are you using? There are a few ways to configure bonding under Debian, the OS I use. Here are a couple: cat /etc/network/interfaces auto bond0 iface bond0 inet static address 131.212.100.1 netmask 255.255.255.0 network 131.212.100.0 broadcast 131.212.100.255 gateway 131.212.100.254 pre-up echo balance-rr > /sys/class/net/bond0/bonding/mode up echo 100 > /sys/class/net/bond0/bonding/miimon up echo 200 > /sys/class/net/bond0/bonding/downdelay up echo 200 > /sys/class/net/bond0/bonding/updelay up echo +eth0 > /sys/class/net/bond0/bonding/slaves up echo +eth1 > /sys/class/net/bond0/bonding/slaves or sudo aptitude install ifenslave-2.6 cat /etc/network/interfaces auto bond0 iface bond0 inet static address 131.212.100.1 netmask 255.255.255.0 network 131.212.100.0 broadcast 131.212.100.255 gateway 131.212.100.254 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 bond_primary eth0 You can also check out Documentation/networking/bonding.txt in your kernel source tree. You may need to echo bonding >> /etc/modules to get it to survive a reboot. -- Matt Zagrabelny - mzagrabe@xxxxxxxxx - (218) 726 8844 University of Minnesota Duluth Information Technology Systems & Services PGP key 4096R/42A00942 2009年12月16日 Fingerprint: 5814 2CCE 2383 2991 83FF C899 07E2 BFA8 42A0 0942 He is not a fool who gives up what he cannot keep to gain what he cannot lose. -Jim Elliot
Attachment:
signature.asc
Description: This is a digitally signed message part