My thinking is that we should allow a user to select any drives they want when creating an array, even if they are on different controllers. If someone wants to limit the drive choices, they could write a higher level UI application to do this checking and limit end user choices; which would then pass these commands to dmraid. Yes/No? Thanks, Jason >-----Original Message----- >From: ataraid-list-bounces@xxxxxxxxxx [mailto:ataraid-list- >bounces@xxxxxxxxxx] On Behalf Of Gaston, Jason D >Sent: Monday, June 11, 2007 2:31 PM >To: mauelshagen@xxxxxxxxxx; ATARAID (eg, Promise Fasttrak, Highpoint 370) >related discussions >Subject: listing drives attached to a particular controller > >How would you go about listing the hard drives attached to a particular >controller? For example, say you have a SCSI controller card w/ drives >and an onboard SATA RAID controller in your system. In the future, >dmraid will have the ability to create a RAID array from the command >line. You may want to only add drives to the array that are attached to >the same controller. Otherwise, when the system boots, the RAID option >ROM may display the RAID array as broken, as it will only see the drives >attached to the single controller. > >Should this functionally be added to the dmraid utility? Should dmraid >block or warn about using block devices that are attached to different >controllers? > >Thanks, > >Jason > >_______________________________________________ >Ataraid-list mailing list >Ataraid-list@xxxxxxxxxx >https://www.redhat.com/mailman/listinfo/ataraid-list _______________________________________________ Ataraid-list mailing list Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list