Pankil is a Civil Engineer turned freelance writer from Ahmedabad, India. As a long-time Windows and Android user, he has extensive knowledge of both operating systems and specializes in creating how-tos and troubleshooting guides.
Pankil has been writing about Windows, Android, and iOS since 2021. He has written over 1200 articles across reputable publications like MakeUseOf, GuidingTech, and TechWiser.
Outside of his writing endeavors, Pankil is an avid football fan and loves to plan his international travels with his wife in his free time.
Buying a phone charger wasn’t even something you had to think about back when brands were nice enough to include one in the box. Those days are mostly gone. And if you’ve gone charger shopping recently, you probably know how confusing it can get with all those wattage numbers and acronyms like PD, PPS, and GaN. I’ve been there too. But once you know what they each mean, picking the right charger gets a lot simpler.
The biggest reason why buying a charger can be confusing is that almost every charger will technically work with your phone. It’s no longer just about getting a charger with the right port. Yes, USB-C is everywhere, and it should’ve simplified things — but that hasn't happened. That means even if two chargers look identical, they might perform completely differently.
You can use a 5W charger from five years ago, and your phone will still charge. But "works" and "works correctly" aren’t the same thing here. Beyond wattage, you need to see if the charger supports advanced charging tech like PD, PPS, and GaN. Again, your phone still will charge without these, but you might be leaving a ton of speed on the table, or paying a premium for wattage your phone can’t even use.
USB PD, PPS, QC, and GaN all mean different things
When buying a charger, you’ll run into terms like PD, PPS, QC, and GaN on them. Each one essentially tells you what's special about the brick.
USB Power Delivery (USB PD) is a charging standard that lets a charger and your phone negotiate how much power gets delivered. So instead of supplying a fixed voltage, the charger and device can talk to each other and agree on the safest, fastest combination. Almost every modern Android phone supports it, and it’s the reason why some chargers can fast charge your phone, laptop, and even a pair of earbuds without frying any of them.
Programmable Power Supply (PPS) does the same thing as USB PD, but slightly better. Instead of adjusting the power in phases, it does it continuously. That means a PPS charger can keep the heat low and efficiency high, which is good for long-term battery health.
Then there are proprietary technologies from different companies. For instance, Qualcomm has Quick Charge (QC) for phones running Snapdragon chips (though it is licensable by non-Snapdragon devices), and it comes in different versions, so you want to pick the highest one your phone supports. Phone brands have their own protocols, like OPPO's SuperVOOC and Motorola’s TurboPower. These typically need both the charger and the phone to be from the same brand to get those advertised charging speeds.
Gallium Nitride (GaN) is a different thing entirely. It’s not related to a charging protocol but rather the material used inside the charger itself. Traditional chargers use silicon components, but GaN chargers use a newer semiconductor that runs more efficiently and generates less heat. The obvious benefit of this is a charger that’s significantly smaller and lighter for the same wattage.
This is probably the most common mistake people make when buying a charger. Wattage isn’t something the charger decides alone. Your phone has a maximum charging rate built into it, and it’ll never exceed that, no matter what you plug in. For instance, my Galaxy S26 tops out at 25W, which means there’s no point in buying a 45W charger. It’ll be as effective as a 25W one.
There’s another wrinkle. The wattage you see mentioned on the charger’s box is a maximum output, not a guarantee of what each device will get. So if you get one of those multi-port chargers, don’t expect it to charge all your devices at the maximum rate mentioned on the box. The charger will split the output between connected devices, and the exact split depends on the charger itself. So the short version is, check your phone’s max charging wattage first, then buy a charger that matches it.
You can buy the perfect charger and still end up with slow charging if the cable doesn’t keep up. If your phone and charger are both capable of 65W, but the cable maxes out at 15W, that’s what you’ll get. This usually isn’t a problem, since most manufacturers still include the cable inside the box (at least for now). But yes, if you’re using a spare one for your office or travel bag, don’t just grab a random USB-C cable.
Finally, with both the charger and the cable, stick to a reputable brand. You might find a no-name charging brick or cable with the same specs on the packaging, but you’ll have to take their word for it. There’s a lot that these cheap chargers leave out, and it’s not worth saving a few bucks to find out.
