I have tagged a 1.3.1 release candidate. Congrats to everyone who reported bugs and worked hard to fix them for this release. As this is only a bugfix release, it should hopefully not take as long to get through the release candidate process. I hope to hear from all the packagers over the next week or two, and barring no issues, I will tag this as 1.3.1 final. The tarball is available here: https://downloads.sourceforge.net/project/matplotlib/matplotlib/matplotlib-1.3.1rc1.tar.gz The changelog is copied below: New in 1.3.1 ------------ 1.3.1 is a bugfix release, primarily dealing with improved setup and handling of dependencies, and correcting and enhancing the documentation. The following changes were made in 1.3.1 since 1.3.0. Enhancements ```````````` - Added a context manager for creating multi-page pdfs (see `matplotlib.backends.backend_pdf.PdfPages`). - The WebAgg backend should no have lower latency over heterogeneous Internet connections. Bug fixes ````````` - Histogram plots now contain the endline. - Fixes to the Molleweide projection. - Handling recent fonts from Microsoft and Macintosh-style fonts with non-ascii metadata is improved. - Hatching of fill between plots now works correctly in the PDF backend. - Tight bounding box support now works in the PGF backend. - Transparent figures now display correctly in the Qt4Agg backend. - Drawing lines from one subplot to another now works. - Unit handling on masked arrays has been improved. Setup and dependencies `````````````````````` - Now works with any version of pyparsing 1.5.6 or later, without displaying hundreds of warnings. - Now works with 64-bit versions of Ghostscript on MS-Windows. - When installing from source into an environment without Numpy, Numpy will first be downloaded and built and then used to build matplotlib. - Externally installed backends are now always imported using a fully-qualified path to the module. - Works with newer version of wxPython. - Can now build with a PyCXX installed globally on the system from source. - Better detection of Gtk3 dependencies. Testing ``````` - Tests should now work in non-English locales. - PEP8 conformance tests now report on locations of issues. -- _ |\/|o _|_ _. _ | | \.__ __|__|_|_ _ _ ._ _ | ||(_| |(_|(/_| |_/|(_)(/_|_ |_|_)(_)(_)| | | http://www.droettboom.com
Hello, `matplotlib-1.3.1rc1.tar.gz\matplotlib-1.3.1rc1\lib\matplotlib.egg-info\SOURCES.txt` contains absolute paths to `/usr/src/CXX/*.cxx` files and therefore distutils fails to build installers on Windows. Deleting the .egg-info directory works for me. Christoph On 9/27/2013 10:20 AM, Michael Droettboom wrote: > I have tagged a 1.3.1 release candidate. Congrats to everyone who > reported bugs and worked hard to fix them for this release. > > As this is only a bugfix release, it should hopefully not take as long > to get through the release candidate process. I hope to hear from all > the packagers over the next week or two, and barring no issues, I will > tag this as 1.3.1 final. > > The tarball is available here: > > https://downloads.sourceforge.net/project/matplotlib/matplotlib/matplotlib-1.3.1rc1.tar.gz > > > The changelog is copied below: > > New in 1.3.1 > ------------ > > 1.3.1 is a bugfix release, primarily dealing with improved setup and > handling of dependencies, and correcting and enhancing the > documentation. > > The following changes were made in 1.3.1 since 1.3.0. > > Enhancements > ```````````` > > - Added a context manager for creating multi-page pdfs (see > `matplotlib.backends.backend_pdf.PdfPages`). > > - The WebAgg backend should no have lower latency over heterogeneous > Internet connections. > > Bug fixes > ````````` > > - Histogram plots now contain the endline. > > - Fixes to the Molleweide projection. > > - Handling recent fonts from Microsoft and Macintosh-style fonts with > non-ascii metadata is improved. > > - Hatching of fill between plots now works correctly in the PDF > backend. > > - Tight bounding box support now works in the PGF backend. > > - Transparent figures now display correctly in the Qt4Agg backend. > > - Drawing lines from one subplot to another now works. > > - Unit handling on masked arrays has been improved. > > Setup and dependencies > `````````````````````` > > - Now works with any version of pyparsing 1.5.6 or later, without > displaying > hundreds of warnings. > > - Now works with 64-bit versions of Ghostscript on MS-Windows. > > - When installing from source into an environment without Numpy, Numpy > will first be downloaded and built and then used to build > matplotlib. > > - Externally installed backends are now always imported using a > fully-qualified path to the module. > > - Works with newer version of wxPython. > > - Can now build with a PyCXX installed globally on the system from source. > > - Better detection of Gtk3 dependencies. > > Testing > ``````` > > - Tests should now work in non-English locales. > > - PEP8 conformance tests now report on locations of issues. >
Thanks for letting me know -- obviously not good. I'll have a look. Mike On 09/27/2013 01:45 PM, Christoph Gohlke wrote: > Hello, > > `matplotlib-1.3.1rc1.tar.gz\matplotlib-1.3.1rc1\lib\matplotlib.egg-info\SOURCES.txt` > contains absolute paths to `/usr/src/CXX/*.cxx` files and therefore > distutils fails to build installers on Windows. Deleting the .egg-info > directory works for me. > > Christoph > > > On 9/27/2013 10:20 AM, Michael Droettboom wrote: >> I have tagged a 1.3.1 release candidate. Congrats to everyone who >> reported bugs and worked hard to fix them for this release. >> >> As this is only a bugfix release, it should hopefully not take as long >> to get through the release candidate process. I hope to hear from all >> the packagers over the next week or two, and barring no issues, I will >> tag this as 1.3.1 final. >> >> The tarball is available here: >> >> https://downloads.sourceforge.net/project/matplotlib/matplotlib/matplotlib-1.3.1rc1.tar.gz >> >> >> >> The changelog is copied below: >> >> New in 1.3.1 >> ------------ >> >> 1.3.1 is a bugfix release, primarily dealing with improved setup and >> handling of dependencies, and correcting and enhancing the >> documentation. >> >> The following changes were made in 1.3.1 since 1.3.0. >> >> Enhancements >> ```````````` >> >> - Added a context manager for creating multi-page pdfs (see >> `matplotlib.backends.backend_pdf.PdfPages`). >> >> - The WebAgg backend should no have lower latency over heterogeneous >> Internet connections. >> >> Bug fixes >> ````````` >> >> - Histogram plots now contain the endline. >> >> - Fixes to the Molleweide projection. >> >> - Handling recent fonts from Microsoft and Macintosh-style fonts with >> non-ascii metadata is improved. >> >> - Hatching of fill between plots now works correctly in the PDF >> backend. >> >> - Tight bounding box support now works in the PGF backend. >> >> - Transparent figures now display correctly in the Qt4Agg backend. >> >> - Drawing lines from one subplot to another now works. >> >> - Unit handling on masked arrays has been improved. >> >> Setup and dependencies >> `````````````````````` >> >> - Now works with any version of pyparsing 1.5.6 or later, without >> displaying >> hundreds of warnings. >> >> - Now works with 64-bit versions of Ghostscript on MS-Windows. >> >> - When installing from source into an environment without Numpy, Numpy >> will first be downloaded and built and then used to build >> matplotlib. >> >> - Externally installed backends are now always imported using a >> fully-qualified path to the module. >> >> - Works with newer version of wxPython. >> >> - Can now build with a PyCXX installed globally on the system from >> source. >> >> - Better detection of Gtk3 dependencies. >> >> Testing >> ``````` >> >> - Tests should now work in non-English locales. >> >> - PEP8 conformance tests now report on locations of issues. >> -- _ |\/|o _|_ _. _ | | \.__ __|__|_|_ _ _ ._ _ | ||(_| |(_|(/_| |_/|(_)(/_|_ |_|_)(_)(_)| | | http://www.droettboom.com
On 9/27/2013 10:20 AM, Michael Droettboom wrote: > - Now works with 64-bit versions of Ghostscript on MS-Windows. Not really. gswin64c.exe is detected in __init__.py but apparently not used in the PS backend: https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/matplotlib/__init__.py#L341 https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/matplotlib/backends/backend_ps.py#L73 https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/matplotlib/backends/backend_ps.py#L1620 Christoph
On 09/27/2013 02:27 PM, Christoph Gohlke wrote: > On 9/27/2013 10:20 AM, Michael Droettboom wrote: >> - Now works with 64-bit versions of Ghostscript on MS-Windows. > Not really. gswin64c.exe is detected in __init__.py but apparently not > used in the PS backend: > > https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/matplotlib/__init__.py#L341 > https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/matplotlib/backends/backend_ps.py#L73 > https://github.com/matplotlib/matplotlib/blob/v1.3.x/lib/matplotlib/backends/backend_ps.py#L1620 > Thanks for pointing this out. The original bug I think was related to not being able to run the tests. The ps backend should be updated to use the same ghostscript finding routines as elsewhere. I'll get this taken care of for 1.3.1rc2. Mike -- _ |\/|o _|_ _. _ | | \.__ __|__|_|_ _ _ ._ _ | ||(_| |(_|(/_| |_/|(_)(/_|_ |_|_)(_)(_)| | | http://www.droettboom.com
On 9/27/13 12:20 PM, Michael Droettboom wrote: > - The WebAgg backend should no have lower latency over heterogeneous > Internet connections. Is that "should not"? Thanks, Jason
It's actually "should now". Thanks for the report. I'll fix it in the repository. Mike On 09/28/2013 03:11 PM, Jason Grout wrote: > On 9/27/13 12:20 PM, Michael Droettboom wrote: >> - The WebAgg backend should no have lower latency over heterogeneous >> Internet connections. > Is that "should not"? > > Thanks, > > Jason > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk > _______________________________________________ > Matplotlib-devel mailing list > Mat...@li... > https://lists.sourceforge.net/lists/listinfo/matplotlib-devel -- _ |\/|o _|_ _. _ | | \.__ __|__|_|_ _ _ ._ _ | ||(_| |(_|(/_| |_/|(_)(/_|_ |_|_)(_)(_)| | | http://www.droettboom.com