Files
090baa1fa968d85da51dfdfcded2da6430900d7f
swift /etc /drive-audit.conf-sample

26 lines
827 B
Plaintext
Raw Normal View History

2010年07月12日 17:03:45 -05:00
[drive-audit]
# device_dir = /srv/node
# log_facility = LOG_LOCAL0
# log_level = INFO
# log_address = /dev/log
# The following caps the length of log lines to the value given; no limit if
# set to 0, the default.
# log_max_line_length = 0
2010年07月12日 17:03:45 -05:00
# minutes = 60
# error_limit = 1
#
# Location of the log file with globbing
# pattern to check against device errors.
Swift configuration parameter audit This change is the result of an audit through the config parameters provided by swift and how/if they are addressed in the swift documentation. The documentation being the sample config files in the /etc directory or the documentation. This change is only concerned with the config files in etc/ next I will look at the documentation in the doc/ folder. This change makes the following assumptions: - Unless stated otherwise, the commented out parameter in the sample configuration is the default for swift. - When the default in the code differs from that of the sample configuration, the default in the code is correct. Container reconciler: Parameter: interval - code: 30 - config: 300 Result: config = 30 Object Expirer: Parameter: recon_cache_path - code: /var/cache/swift - config: Parameter missing Result: Add parameter swift-dispersion-populate && swift-dispersion-report Parameter: auth_version - code: 1.0 - config: 2.0 (due to being a confusing example of how to setup version 2.0). Result: Added 'auth_version = 1.0' to the right section (showing default and make the sample configuration for auth version 2.0 easier to understand. swift-drive-audit: Parameter: log_file_pattern - code: /var/log/kern.*[!.][!g][!z] - config: /var/log/kern* Result: config = /var/log/kern.*[!.][!g][!z] NOTE: swift-drive-audit uses a parameter called device_dir which defaults to '/srv/node'. In all other swift binaries/services there is a similar parameter called devices which stores the same thing. This is an inconsistency which I haven't fixed as this could break existing swift clusters out in the wild. Proxy Server: Parameter: object_chunk_size - code: 65536 - config: 8192 Result: config = 65536 Parameter: client_chunk_size - code: 65536 - config: 8192 Result: config = 65536 Parameter: strict_cors_mode - code: True - config: No parameter Result: config = True Account and Container replicator configuration confusion: NOTES: The account and container replicators have parameters: - interval - run_pause Both of these are loaded into the same variable in code: self.interval = int(conf.get('interval') or conf.get('run_pause') or 30) If a user sets both to different values then interval is used. Result: Update the configuration to make this more clear. DocImpact Change-Id: Iaadbb1a6284f8b3e0801bc343b29772f70f4bf6e
2014年07月04日 15:56:45 +10:00
# log_file_pattern = /var/log/kern.*[!.][!g][!z]
#
# Regular expression patterns to be used to locate
# device blocks with errors in the log file. Currently
# the default ones are as follows:
# \berror\b.*\b(sd[a-z]{1,2}\d?)\b
# \b(sd[a-z]{1,2}\d?)\b.*\berror\b
# One can overwrite the default ones by providing
Swift configuration parameter audit This change is the result of an audit through the config parameters provided by swift and how/if they are addressed in the swift documentation. The documentation being the sample config files in the /etc directory or the documentation. This change is only concerned with the config files in etc/ next I will look at the documentation in the doc/ folder. This change makes the following assumptions: - Unless stated otherwise, the commented out parameter in the sample configuration is the default for swift. - When the default in the code differs from that of the sample configuration, the default in the code is correct. Container reconciler: Parameter: interval - code: 30 - config: 300 Result: config = 30 Object Expirer: Parameter: recon_cache_path - code: /var/cache/swift - config: Parameter missing Result: Add parameter swift-dispersion-populate && swift-dispersion-report Parameter: auth_version - code: 1.0 - config: 2.0 (due to being a confusing example of how to setup version 2.0). Result: Added 'auth_version = 1.0' to the right section (showing default and make the sample configuration for auth version 2.0 easier to understand. swift-drive-audit: Parameter: log_file_pattern - code: /var/log/kern.*[!.][!g][!z] - config: /var/log/kern* Result: config = /var/log/kern.*[!.][!g][!z] NOTE: swift-drive-audit uses a parameter called device_dir which defaults to '/srv/node'. In all other swift binaries/services there is a similar parameter called devices which stores the same thing. This is an inconsistency which I haven't fixed as this could break existing swift clusters out in the wild. Proxy Server: Parameter: object_chunk_size - code: 65536 - config: 8192 Result: config = 65536 Parameter: client_chunk_size - code: 65536 - config: 8192 Result: config = 65536 Parameter: strict_cors_mode - code: True - config: No parameter Result: config = True Account and Container replicator configuration confusion: NOTES: The account and container replicators have parameters: - interval - run_pause Both of these are loaded into the same variable in code: self.interval = int(conf.get('interval') or conf.get('run_pause') or 30) If a user sets both to different values then interval is used. Result: Update the configuration to make this more clear. DocImpact Change-Id: Iaadbb1a6284f8b3e0801bc343b29772f70f4bf6e
2014年07月04日 15:56:45 +10:00
# new expressions using the format below:
# Format: regex_pattern_X = regex_expression
# Example:
# regex_pattern_1 = \berror\b.*\b(dm-[0-9]{1,2}\d?)\b