New YT Video about ZT-5566SE #35

I wrote a comment under video. I hope we can get a response.

+++
i changed Read.me file

Happy New Year!!
Ludwich

Thank you 😊 happy new year too

Hi Engin,
did you see Darrens comment?

image

Yes I saw and also sent a mail same day. And he responded that he will test it and return. But he didn't send anything yet.

ok now we are getting somewhere :)

Portable.zip
with this version you will see some measurements but there will errors. but its ok. if we can find which wrong displayed item is which we can fix. so you need to do stable measurements so we can fix error.

I measured capacitor 1370uF
log-2023年01月16日.txt
Bez tytułu

On hold button is voltage measurment. I don't quite know what to do, the program shows y.000 or x.000, sometimes y.001 Should I measure capacitance, voltage and resistance and send a log file?

https://www.youtube.com/watch?v=bQ6R_N7Hwnw

we can fix mode button issues later because first we need to fix display first. There is a problem with digits. in original app gives us a different place but sample data is different.

I measured capacitor 1370uF
log-2023年01月16日.txt

is that the only measurements for it?

Measurements taken:
capacity
DC voltage
resistance on continuity test (there is no button for resistance)
Log in attachment
log-2023年01月16日.txt
https://www.youtube.com/watch?v=5czgT9928ck

I checked again more thoroughly. HOLD function doesn't work, MAX/MIN and REL is ok :)

https://www.youtube.com/watch?v=Fx2WexE54Pc

I checked again more thoroughly. HOLD function doesn't work, MAX/MIN and REL is ok :)

actually hold is not working because device hold its own display but sending realtime data to app. I don't know if official app has same problem but its not about the app. also rel function is working but rel symbol is not showing on app the triangle symbol is for rel.

this is getting hold but will not hold because of device sending data and also I tryed to figure out where the rel is. I wish I found it. If not I need data before rel and rel pressed. also removed contact to us strip :)
Portable.zip

to się trzyma, ale nie będzie się utrzymywać z powodu wysyłania danych przez urządzenie, a także próbowałem dowiedzieć się, gdzie jest rel. Chciałbym to znaleźć. Jeśli nie, potrzebuję danych przed naciśnięciem rel i rel. usunięto również pasek kontaktowy do nas :) Portable.zip

afret REL.txt
before REL.txt

My guess was right :) It should work with last one :) you will see triangle next to AC/DC when its in rel ;)

@kozakserwis Thank you so much :) there is nothing for now :) if there will be any data we need I will ask for it thanks again :)

@ludwich66 the last shape of datas for 5566se is here
image

image

image

Danke, ich werde es erst morgen ergänzen - ich melde mich bei Rückfragen.

Schönen Abend

Tolles Ergebnis!!

image

ohh sorry this part was changed as below

image

Its ok :) whenever you want :)

BT-DMM_BITMASTER.ods
only fixed last part

°F: no, did it before

ok fixed

Position is exact over Hamburger Menue

I know but there is 2 option for it 1. seperate them two line or 2. make them smaller
both of them can be looks weird. I'll think about it.

HZ:

there is no hz measurement for your device. right?

How did you Hack this now?

not hacked actually. I made my PC a fake device and emuleted the dmm then connected to pc with official app :))

Please, send the fixed Version.

The position isn't a problem, I thought the windows got in the way :-)

Left HZ Button works fine on V05B.

+++

The position isn't a problem, I thought the windows got in the way :-)

what you mean? do you mean I can left it as it is?

Yes - let it be :-)

Great !!
Remote It is complete on V05B.!!!

-> ?? Disable unused Buttons (minMax, mVHz. Ohm, A/mA , ACDC) if they are not supported on spec device ??

L

but I dont know which butons working on which device.

Disable unused Buttons (minMax, mVHz. Ohm, A/mA , ACDC)

these buttons isnt working for you? did you ever try them with official app?

but I dont know which butons working on which device.

Disable unused Buttons (minMax, mVHz. Ohm, A/mA , ACDC)

these buttons isnt working for you? did you ever try them with official app?

some buttons can usable on only some modes!

I think it was different even in the original software, with one all the buttons were there (like ours) with the other only the usable ones were there.
So no problem - for me it's OK :-)

I think it was different even in the original software, with one all the buttons were there (like ours) with the other only the usable ones were there.

actually its all there If I remind correct. I saw only one change in buttons and its auto button. changed like that
Screenshot_2023年01月20日-20-07-52

Now we have communication problems again?
Cap mode --> measure farads then ZERO Button to Reset Farads to 0000?
or what did you meen?

What is EA EC 70 E3 A2 C1 32 71 64 9B c/f on your Listing ??

Old Entry
image

I mean my emulator app sending data to e-bull app that acts as multimeter. So my emulator have to send data as multimeter is in cap mode. That means I have to find which data was in capacitance measurement

hahaha :) I found it :)) EA EC 70 E0 A2 C1 32 71 64 9A for zero in cap mode :)

Great, I was about to write that it's a relatively rarely required action. But having is better than needing ;-)
L

@ludwich66 can you try this too.
https://github.com/webspiderteam/Bluetooth_DMM_For_Windows_MQTT_Test_Project/releases/tag/emulator1.0

this is the emulator app. but before use it you have to make some tweak.

Morning Engin,
good idea to split buttons!!
But Zero dosn't work for v05B (Check: IPhone App does it)
Next to do view Emulator!
L

sorry about that. its typo mistake.
Portable.zip

Next to do view Emulator!

you have to change your PC's bluetooth name to Bluetooth DMM otherwise app does not see ;)