@HeldvomForst

Hello

I try this Projekt but it doesnt work with my new US5000

I have 3 Batteries over MQTT Home Assistant only get Information for 2 of this and there are only 0 Values
I also see only 3 Main values "Pylontech Battery Current" "Pylontech DC Power" "Pylontech Power OUT" all are wrong.

I Think Pylontech chance something in the Communication they send more Data.

Here the Output of "PWR" on the ESP:
`
pwr

@

Power Volt Curr Tempr Tlow Tlow.Id Thigh Thigh.Id Vlow Vlow.Id Vhigh Vhigh.Id Base.St Volt.St Curr.St Temp.St Coulomb Time B.V.St B.T.St MosTempr M.T.St SysAlarm.St

1 49093 -2358 16800 15100 12 16100 0 3272 13 3273 0 Dischg Normal Normal Normal 52% 2025年04月04日 05:23:54 Normal Normal 16400 Normal Normal

2 49095 -1224 18200 15600 10 16000 5 3272 0 3274 5 Dischg Normal Normal Normal 51% 2025年04月04日 05:23:53 Normal Normal 16700 Normal Normal

3 49087 -1176 18200 16000 0 16100 5 3271 0 3274 12 Dischg Normal Normal Normal 53% 2025年04月04日 05:23:53 Normal Normal 17000 Normal Normal

4 - - - - - - - Absent - - - - - - -

5 - - - - - - - Absent - - - - - - -

6 - - - - - - - Absent - - - - - - -

7 - - - - - - - Absent - - - - - - -

8 - - - - - - - Absent - - - - - - -

9 - - - - - - - Absent - - - - - - -

10 - - - - - - - Absent - - - - - - -

11 - - - - - - - Absent - - - - - - -

12 - - - - - - - Absent - - - - - - -

13 - - - - - - - Absent - - - - - - -

14 - - - - - - - Absent - - - - - - -

15 - - - - - - - Absent - - - - - - -

16 - - - - - - - Absent - - - - - - -

Command completed successfully

$$

pylon_debug>
`