#include <WiFi.h>
#include <esp_sntp.h>
void setup() {
 configTzTime("CET-1CEST,M3.5.0,M10.5.0/3", "pool.ntp.org", "");
 configTzTime("CET-1CEST,M3.5.0,M10.5.0/3", "pool.ntp.org", "");
}
void loop() {}

ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT)
Saved PC:0x4037b4ee
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x10f0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xbec
load:0x403cb700,len:0x2fcc
entry 0x403c88ac
[ 0][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DM (45) successfully set to 0x4200abe0
[ 12][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type USB_DP (46) successfully set to 0x4200abe0
[ 23][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4200a568
[ 34][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4200a534
[ 46][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4200a500
[ 57][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4200a4cc
[ 68][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4200a568
[ 80][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4200a534
[ 91][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4200a500
[ 102][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4200a4cc
[ 114][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RX (2) successfully set to 0x4200a568
[ 125][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_TX (3) successfully set to 0x4200a534
[ 136][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_CTS (4) successfully set to 0x4200a500
[ 148][V][esp32-hal-periman.c:235] perimanSetBusDeinit(): Deinit function for type UART_RTS (5) successfully set to 0x4200a4cc
[ 172][I][esp32-hal-psram.c:102] psramAddToHeap(): PSRAM added to the heap.
[ 191][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 44 successfully set to type UART_RX (2) with bus 0x3fc9670c
[ 202][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 43 successfully set to type UART_TX (3) with bus 0x3fc9670c
[ 213][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 19 successfully set to type USB_DM (45) with bus 0x3fc9c45c
[ 223][V][esp32-hal-periman.c:160] perimanSetPinBus(): Pin 20 successfully set to type USB_DP (46) with bus 0x3fc9c45c
=========== Before Setup Start ===========
Chip Info:
------------------------------------------
 Model : ESP32-S3
 Package : 0
 Revision : 0.01
 Cores : 2
 CPU Frequency : 240 MHz
 XTAL Frequency : 40 MHz
 Features Bitfield : 0x00000012
 Embedded Flash : No
 Embedded PSRAM : No
 2.4GHz WiFi : Yes
 Classic BT : No
 BT Low Energy : Yes
 IEEE 802.15.4 : No
------------------------------------------
INTERNAL Memory Info:
------------------------------------------
 Total Size : 358124 B ( 349.7 KB)
 Free Bytes : 324372 B ( 316.8 KB)
 Allocated Bytes : 28624 B ( 28.0 KB)
 Minimum Free Bytes: 320568 B ( 313.1 KB)
 Largest Free Block: 258036 B ( 252.0 KB)
------------------------------------------
SPIRAM Memory Info:
------------------------------------------
------------------------------------------
Flash Info:
------------------------------------------
 Chip Size : 4194304 B (4 MB)
 Block Size : 65536 B ( 64.0 KB)
 Sector Size : 4096 B ( 4.0 KB)
 Page Size : 256 B ( 0.2 KB)
 Bus Speed : 80 MHz
 Bus Mode : QIO
------------------------------------------
Partitions Info:
------------------------------------------
 nvs : addr: 0x00009000, size: 20.0 KB, type: DATA, subtype: NVS
 otadata : addr: 0x0000E000, size: 8.0 KB, type: DATA, subtype: OTA
 app0 : addr: 0x00010000, size: 1280.0 KB, type: APP, subtype: OTA_0
 app1 : addr: 0x00150000, size: 1280.0 KB, type: APP, subtype: OTA_1
 ffat : addr: 0x00290000, size: 1408.0 KB, type: DATA, subtype: FAT
 coredump : addr: 0x003F0000, size: 64.0 KB, type: DATA, subtype: COREDUMP
------------------------------------------
Software Info:
------------------------------------------
 Compile Date/Time : Dec 3 2024 19:52:04
 Compile Host OS : windows
 ESP-IDF Version : v5.3.1-638-ga0f798cfc4-dirty
 Arduino Version : 3.1.0
------------------------------------------
Board Info:
------------------------------------------
 Arduino Board : LOLIN_S3_MINI
 Arduino Variant : lolin_s3_mini
 Arduino FQBN : esp32:esp32:lolin_s3_mini:UploadSpeed=921600,USBMode=hwcdc,CDCOnBoot=cdc,MSCOnBoot=default,DFUOnBoot=default,UploadMode=cdc,CPUFreq=240,FlashMode=qio120,PartitionScheme=defaultffat,DebugLevel=verbose,LoopCore=1,EventsCore=1,EraseFlash=none
============ Before Setup End ============
assert failed: sntp_stop /IDF/components/lwip/lwip/src/apps/sntp/sntp.c:696 (Required to lock TCPIP core functionality!)
Backtrace: 0x40376586:0x3fca9cb0 0x4037dd91:0x3fca9cd0 0x40384801:0x3fca9cf0 0x4201cf1e:0x3fca9e20 0x42008917:0x3fca9e40 0x42003076:0x3fca9e60 0x4200898b:0x3fca9e80 0x4037eaa6:0x3fca9ea0
ELF file SHA256: 0a6c2ca4c