[Gehäuse] #9

@foiltex-del

Name des Designs / Design name

Main Components Box with Lid

Urheber / Author

Bernd Stachowski

Dateien / Files

The Box is designed for Mounting directly on a Wall or on Din Rail. The Box can be screwed (inside the 4 Corners) on a wall with components installed. For Mounting on DinRail you need to remove Components. For installing the DinRail Adapter you need to use Countersunk Screws to prevent Shortcuts on the bottom Pins of the Boards.
The Holes in the Bottom of the MainPart are for the DinRail Adapter. So it can be mounted crosswise or upright. Also in can be mounted off-center in all directions. The "Port" on one side is for Secure Kabels with a Strap to prevent breaks due Vibrations. In the Lid is a Option to Mount a 40x40mm Fan

You need: 4pcs Magnets: Diameter 5mm, 3mm hight. for the Lid
minimum 2pcs Contersunk Screws M3 x 8mm with M3 Nuts for the DinRail Adapter (print minimum 2pcs , for maximum Safety print 4pcs. )

Also you need 14pcs Screws to Mount the Boards on the MainPart. Depending which Screws you would like to use you have to drill the holes in the Posts

Druckeinstellungen / Print settings

Material: ABS or ASA
Layer: 0,2mm
Walls: 3-4
Infill 20-30%
No Support needed

Zusätzliche Teile / Additional parts

You need: 4pcs Magnets: Diameter 5mm, 3mm hight. for the Lid
minimum 2pcs Contersunk Screws M3 x 8mm with M3 Nuts for the DinRail Adapter (print minimum 2pcs , for maximum Safety print 4pcs. )

Also you need 14pcs Screws to Mount the Boards on the MainPart. Depending which Screws you would like to use you have to drill the holes in the Posts

Anmerkungen / Notes

No response

Bestätigung / Confirmation

• Das Design ist meine eigene Arbeit und enthält keine Fremdteile, deren Weitergabe eingeschränkt ist (z. B. Hersteller-CAD von Steckern). / This design is my own work and contains no third-party parts with redistribution restrictions (e.g. manufacturer connector CAD).
• Ich stelle das Design unter CC BY-SA 4.0 und weiß, dass diese Lizenz unwiderruflich ist. / I license this design under CC BY-SA 4.0 and understand that this license is irrevocable.
• Ich bin mit der Nennung des oben angegebenen Namens einverstanden. / I agree to being credited under the name given above.