Skip to content

Commit ee30661

marqdevx marqdevx

committed

Lint: USB-C trademark

1 parent b702693 commit ee30661Copy full SHA for ee30661

File tree

19 files changed

+26

-26

lines changed

content/hardware
- 04.pro
  - boards
    - portenta-h7/tutorials
      - ble-connectivity
        content.md
      - dual-core-processing
        content.md
      - flash-optimized-key-value-store
        content.md
      - lauterbach-debugger
        content.md
      - setting-up-portenta
        content.md
      - updating-the-bootloader
        content.md
      - usb-host
        content.md
      - wifi-access-point
        content.md
    - portenta-x8/tutorials/uploading-sketches-m4
      - content.md
  - carriers
    - portenta-breakout/tutorials/getting-started
      - content.md
    - portenta-max-carrier/datasheet
      - datasheet.md
  - shields/portenta-vision-shield/tutorials
    - blob-detection
      - content.md
    - camera-to-bitmap-sd-card
      - content.md
    - connecting-to-ttn
      - content.md
    - creating-basic-face-filter
      - content.md
    - getting-started-camera
      - content.md
- 05.pro-solutions/solutions-and-kits/portenta-machine-control/datasheet
  - datasheet.md
- 06.nicla/boards/nicla-vision/tutorials
  - blob-detection
    - content.md
  - getting-started
    - content.md

19 files changed

+26

-26

lines changed

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/ble-connectivity/content.md‎`

Lines changed: 3 additions & 3 deletions

Original file line number	Diff line number	Diff line change
`@@ -27,13 +27,13 @@ In this tutorial we will enable low energy Bluetooth® on the Portenta H7 to all`
`27`	`27`
`28`	`28`	`## Goals`
`29`	`29`
`30`		`-- Enabling Bluetooth® Low Energy connectivity on the Portenta H7.`
`31`		`-- Connecting the Portenta to an external Bluetooth® Low Energy Mobile Application (In this case [nRF Connect](https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-mobile) by Nordic Semiconductor).`
	`30`	`+- Enabling Bluetooth® Low Energy connectivity on the Portenta H7.`
	`31`	`+- Connecting the Portenta to an external Bluetooth® Low Energy Mobile Application (In this case [nRF Connect](https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-mobile) by Nordic Semiconductor).`
`32`	`32`
`33`	`33`	`### Required Hardware and Software`
`34`	`34`
`35`	`35`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`36`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`36`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`37`	`37`	`- Arduino IDE 1.8.13+ or Arduino Pro IDE 0.0.4+`
`38`	`38`	`- Mobile device, phone or tablet`
`39`	`39`	`- [nRFconnect](https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-mobile) or equivalent tool downloaded on your mobile device: [nRF Connect for iOS](https://itunes.apple.com/us/app/nrf-connect/id1054362403?ls=1&mt=8) or [nRF Connect for android](https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp)`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/dual-core-processing/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -32,7 +32,7 @@ The Portenta H7 is equipped with a processor that has two processing units calle`
`32`	`32`	`### Required Hardware and Software`
`33`	`33`
`34`	`34`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`35`		`-- USB C cable (either USB A to USB C or USB C to USB C)`
	`35`	`+- USB-C® cable (either USB A to USB-C® or USB-C® to USB-C®)`
`36`	`36`	`- Arduino IDE 1.8.10+`
`37`	`37`
`38`	`38`	`## Cortex® M7 & M4`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/flash-optimized-key-value-store/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -29,7 +29,7 @@ In this tutorial you will learn how to use the Mbed OS [TDBStore API](https://os`
`29`	`29`	`### Required Hardware and Software`
`30`	`30`
`31`	`31`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7), [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`32`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`32`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`33`	`33`	`- Arduino IDE 1.8.10+ or Arduino Pro IDE 0.0.4+ or Arduino CLI 0.13.0+`
`34`	`34`
`35`	`35`	`## Instructions`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/lauterbach-debugger/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -26,7 +26,7 @@ This tutorial will show you how to use the Lauterbach TRACE32 GDB front-end debu`
`26`	`26`
`27`	`27`	`### Required Hardware and Software`
`28`	`28`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7), [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`29`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`29`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`30`	`30`	`- Arduino IDE 1.8.13+ or Arduino Pro IDE 0.1.0+`
`31`	`31`	`- Lauterbach TRACE32 (https://www.lauterbach.com/download_demo.html)`
`32`	`32`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/setting-up-portenta/content.md‎`

Lines changed: 2 additions & 2 deletions

Original file line number	Diff line number	Diff line change
`@@ -37,7 +37,7 @@ This tutorial focuses on the Arduino core which allows you to benefit from the t`
`37`	`37`	`### Required Hardware and Software`
`38`	`38`
`39`	`39`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7), [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`40`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`40`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`41`	`41`
`42`	`42`	`## Portenta and The Arduino Core`
`43`	`43`	The Portenta H7 is equipped with two Arm Cortex ST processors (Cortex-M4 and Cortex-M7) which run the Mbed OS. Mbed OS is an embedded real time operating system (RTOS) designed specifically for microcontrollers to run IoT applications on low power. A real-time operating system is an operating system designed to run real-time applications that process data as it comes in, typically without buffer delays. [Here you can read more about real time operating systems](https://www.ni.com/en-us/innovations/white-papers/07/what-is-a-real-time-operating-system--rtos--.html).
`@@ -54,7 +54,7 @@ In this section, we will guide you through a step-by-step process of setting up`
`54`	`54`	`*IMPORTANT: Please make sure to update the bootloader to the most recent version to benefit from the latest improvements. Follow [these steps](updating-the-bootloader) before you proceed with the next step of this tutorial.*`
`55`	`55`
`56`	`56`	`### 1. The Basic Setup`
`57`		`-Let's begin by Plug-in your Portenta to your computer using the appropriate USB C cable. Next, open your IDE and make sure that you have the right version of the Arduino IDE downloaded on to your computer.`
	`57`	`+Let's begin by Plug-in your Portenta to your computer using the appropriate USB-C® cable. Next, open your IDE and make sure that you have the right version of the Arduino IDE downloaded on to your computer.`
`58`	`58`
`59`	`59`	`![The Portenta H7 can be connected to the computer using an appropriate USB-C® cable](assets/por_ard_gs_basic_setup.svg)`
`60`	`60`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/updating-the-bootloader/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -28,7 +28,7 @@ This tutorial will explain what a bootloader is, why you should consider keeping`
`28`	`28`	`### Required Hardware and Software`
`29`	`29`
`30`	`30`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7), [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`31`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`31`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`32`	`32`	`- Arduino IDE 1.8.10+`
`33`	`33`
`34`	`34`	`## What Is a Firmware?`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/usb-host/content.md‎`

Lines changed: 3 additions & 3 deletions

Original file line number	Diff line number	Diff line change
`@@ -184,7 +184,7 @@ In the image above you can see that:`
`184`	`184`
`185`	`185`	`### Alternative Configuration (No USB Hub Required)`
`186`	`186`
`187`		`-If you do not have a USB-C® type hub, you may complete this tutorial with a USB-C® type keyboard or with a USBA type keyboard and a USBA to C adapter. To do so, proceed as follows:`
	`187`	`+If you do not have a USB-C® type hub, you may complete this tutorial with a USB-C® type keyboard or with a USB-A type keyboard and a USB-A to USB-C® adapter. To do so, proceed as follows:`
`188`	`188`
`189`	`189`	`- Power the Portenta H7 through the VIN pin with 5V. (Check [pinout diagram](https://content.arduino.cc/assets/Pinout-PortentaH7_latest.pdf))`
`190`	`190`	`- Connect the keyboard directly to the Portenta's USB-C® connector (use a USB-A to USB-C® adapter if your keyboard's connector is USB type A)`
`@@ -199,7 +199,7 @@ Once you have connected your portenta board, you should be able to toggle the LE`
`199`	`199`	`If it does not work as it should, try the following:`
`200`	`200`
`201`	`201`	`1. Reset the portenta by pressing the Reset button. ![Reset Button](assets/por_ard_usbh_reset.png)`
`202`		`-2. Disconnect the Portenta board from the USB Hub (USB C adapter), disconnect the power from the USB Hub, connect the Portenta to the USB Hub and then connect the power to the USB Hub.`
	`202`	`+2. Disconnect the Portenta board from the USB Hub (USB-C® adapter), disconnect the power from the USB Hub, connect the Portenta to the USB Hub and then connect the power to the USB Hub.`
`203`	`203`
`204`	`204`	`## Conclusion`
`205`	`205`
`@@ -270,6 +270,6 @@ In the data received on the MKR WiFi 1010 board you should see some "Enabled" me`
`270`	`270`	`If in the messages received on the MKR WiFi 1010 board you see any "Disabled" message, it means that something went wrong with the communication of the USB Hub and the Portenta board. If this happens, try:`
`271`	`271`
`272`	`272`	`1. Reset the Portenta by pressing the reset button.`
`273`		`-2. Disconnect the Portenta board from the USB Hub (USB C adapter), disconnect the power from the USB Hub, connect the Portenta to the USB Hub and connect the power to the USB Hub.`
	`273`	`+2. Disconnect the Portenta board from the USB Hub (USB-C® adapter), disconnect the power from the USB Hub, connect the Portenta to the USB Hub and connect the power to the USB Hub.`
`274`	`274`
`275`	`275`	`If, after repeating this process several times, the connection still is not working, the USB Hub you are using may not be compatible with the Portenta board and you will need a different USB Hub to complete this tutorial.`

`‎content/hardware/04.pro/boards/portenta-h7/tutorials/wifi-access-point/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -32,7 +32,7 @@ Portenta H7 comes with an on-board Wi-Fi and a Bluetooth® Module that allows to`
`32`	`32`	`### Required Hardware and Software`
`33`	`33`
`34`	`34`	`- [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)`
`35`		`-- One USB C cable (either USBA to USB C or USB C to USB C)`
	`35`	`+- One USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`36`	`36`	`- Arduino IDE 1.8.10+ or Arduino Pro IDE 0.0.4 +`
`37`	`37`	`- A smart phone`
`38`	`38`

`‎content/hardware/04.pro/boards/portenta-x8/tutorials/uploading-sketches-m4/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -23,7 +23,7 @@ In this tutorial we will go through the process of uploading sketches to the M4`
`23`	`23`
`24`	`24`	`### Required Hardware and Software`
`25`	`25`	`- [Portenta X8](https://store.arduino.cc/products/portenta-x8)`
`26`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`26`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`27`	`27`	`- Arduino IDE 1.8.10+ or Arduino-cli`
`28`	`28`	`- Latest "Arduino Mbed OS Portenta Boards" Core > 3.0.1`
`29`	`29`

`‎content/hardware/04.pro/carriers/portenta-breakout/tutorials/getting-started/content.md‎`

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -21,7 +21,7 @@ The Arduino Portenta Breakout is a versatile tool designed for developing, testi`
`21`	`21`
`22`	`22`	`- [Arduino Portenta H7](https://store.arduino.cc/portenta-h7)`
`23`	`23`	`- [Arduino Portenta Breakout](https://store.arduino.cc/portenta-breakout)`
`24`		`-- USB C cable (either USBA to USB C or USB C to USB C)`
	`24`	`+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)`
`25`	`25`	`- Breadboard & Cables`
`26`	`26`	`- Pin headers for the Portenta Breakout`
`27`	`27`	`- LED & Resistor`

0 commit comments

Comments

(0)