Commit dc7f740

marqdevxBenjaminDannegard

and

authored

Apply suggestions from code review

Co-authored-by: BenjaminDannegard <benjamin.dannegard@gmail.com>

1 parent fe45abb commit dc7f740Copy full SHA for dc7f740

File tree

1 file changed

+18

-18

lines changed

content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing
- content.md

1 file changed

+18

-18

lines changed

`‎content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md‎`

Lines changed: 18 additions & 18 deletions

Original file line number	Diff line number	Diff line change
`@@ -16,11 +16,11 @@ software:`
`16`	`16`
`17`	`17`	`## Overview`
`18`	`18`
`19`		`-In this tutorial you will see how to manually flash your Portenta X8 with the image that is provided by foundries through USB using the Terminal.`
	`19`	`+In this tutorial you will see how to manually flash your Portenta X8 with the image that is provided by Foundries.io through USB using the Terminal.`
`20`	`20`
`21`	`21`	`## Goals`
`22`	`22`
`23`		`-- Get the needed files`
	`23`	`+- Get the required files`
`24`	`24`	`- Set up the correct structure of the files`
`25`	`25`	`- Set up the board`
`26`	`26`	`- Flash the device`
`@@ -32,15 +32,15 @@ In this tutorial you will see how to manually flash your Portenta X8 with the im`
`32`	`32`	`- Portenta Breakout Board <!-- or Portenta Max Carrier-->`
`33`	`33`	`- Arduino Create account`
`34`	`34`	`- Arduino Create Pro subscription`
`35`		`-- Foundries account (linked with the Pro plan)`
`36`		`-- Foundries factory (Check the Getting Started tutorial)`
`37`		`-- 1 Device already attatched to your factory (Check the Getting Started tutorial)`
	`35`	`+- Foundries.io account (linked with the Pro plan)`
	`36`	`+- FoundriesFactory® ([Check the Getting Started tutorial](https://docs.arduino.cc/tutorials/portenta-x8/out-of-the-box))`
	`37`	`+- 1 Device already attatched to your factory ([Check the Getting Started tutorial](https://docs.arduino.cc/tutorials/portenta-x8/out-of-the-box))`
`38`	`38`
`39`	`39`	`## Instructions`
`40`	`40`
`41`		`-### Get the needed files`
	`41`	`+### Get the Required Files`
`42`	`42`
`43`		`-Needed files following this structure:`
	`43`	`+Required files following this structure:`
`44`	`44`
`45`	`45`	`- Root folder`
`46`	`46`	`- imx-boot`
`@@ -50,7 +50,7 @@ Needed files following this structure:`
`50`	`50`	`- mfgtool-files-portenta-x8.tar (Unzipped)`
`51`	`51`	`- lmp-partner-arduino-image-portenta-x8.wic.gz (Unzipped)`
`52`	`52`
`53`		`-To get those files open your Foundries factory.`
	`53`	`+To get those files open your FoundriesFactory®.`
`54`	`54`
`55`	`55`	`Switch to the targets tab.`
`56`	`56`
`@@ -60,30 +60,30 @@ On the "Runs" section open those collapsed labels, and download the files listed`
`60`	`60`
`61`	`61`	`After downloading them, make sure you put them in a folder following the structure shown.`
`62`	`62`
`63`		`-### Set up the Portenta X8 into flashing mode`
	`63`	`+### Set the Portenta X8 to Flashing Mode`
`64`	`64`
`65`		`-Plug you Porenta X8 in your carrier (Portenta Breakout carrier <!-- or Portenta Max Carrier-->).`
	`65`	`+Plug your Porenta X8 into your carrier (Portenta Breakout carrier <!-- or Portenta Max Carrier-->).`
`66`	`66`
`67`		`-Switch both DIP switches into the ON position.`
	`67`	`+Switch both DIP switches to the ON position.`
`68`	`68`
`69`		`-Plug the USB-C on the Portenta X8 and the other end (USB-C or USB-A) to your computer.`
	`69`	`+Plug the USB-C end into the Portenta X8 and the other end (USB-C or USB-A) to your computer.`
`70`	`70`
`71`	`71`	You will see a new device connected called `SE Blank M845S`.
`72`	`72`
`73`		`-### Flash the device`
	`73`	`+### Flash the Device`
`74`	`74`
`75`		-Open a terminal and change the directory (`cd`) to your root folder as shown on the beginning.
	`75`	+Open a terminal and change the directory (`cd`) to your root folder as shown in the beginning.
`76`	`76`
`77`		`-Introduce ́uuu full_image.uuu ́`
	`77`	`+Use the ́uuu full_image.uuu ́ command.`
`78`	`78`
`79`	`79`	`Wait until it gets flashed.`
`80`	`80`
`81`	`81`	`Switch back the DIP switches to OFF position.`
`82`	`82`
`83`		`-Unplug and plug again the Portenta X8 to your computer.`
	`83`	`+Unplug and then plug in the Portenta X8 to your computer.`
`84`	`84`
`85`		`-*After flashing you will need to wait 10 secs, until the Portenta X8 blue LED start blinking, that means the boot was successful*`
	`85`	`+*After flashing you will need to wait 10 secs, until the Portenta X8 blue LED starts blinking, this means the boot was successful*`
`86`	`86`
`87`	`87`	`## Troubleshooting`
`88`	`88`
`89`		`-- If you get an error while its flashing, make sure your USB is correctly plugged. Re-plug your board and try to flash again, you may need few tries before it gets a success flashing.`
	`89`	`+- If you get an error while its flashing, make sure your USB is correctly plugged in. Re-plug your board and try to flash again, you may need few tries before the flashing is successful.`

0 commit comments

Comments

(0)

Navigation Menu

Search code, repositories, users, issues, pull requests...

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

Commit dc7f740

File tree

1 file changed

1 file changed

`‎content/hardware/04.pro/boards/portenta-x8/tutorials/image-flashing/content.md‎`

0 commit comments