Commit bc3ea79

committed

reverse servo changes

1 parent 7aa91d7 commit bc3ea79Copy full SHA for bc3ea79

File tree

-2

lines changed

-2

lines changed

Lines changed: 2 additions & 2 deletions

Original file line number	Diff line number	Diff line change
`@@ -65,13 +65,13 @@ The signal pin is typically yellow or orange and should be connected to PWM pin`
`65`	`65`
`66`	`66`	For the Knob example, wire the potentiometer so that its two outer pins are connected to power (+5V) and ground, and its middle pin is connected to `A0` on the board. Then, connect the servo motor as shown in the circuit below.
`67`	`67`
`68`		`-![The Knob Circuit.](./assets/servo_circuit_knob-pot.png)`
	`68`	`+![The Knob Circuit.](./assets/servo_circuit_knob.png)`
`69`	`69`
`70`	`70`	`### Sweep Circuit`
`71`	`71`
`72`	`72`	`For the Sweep example, connect the servo motor as shown in the circuit below.`
`73`	`73`
`74`		`-![The Sweep Circuit.](./assets/servo_circuit_knob.png)`
	`74`	`+![The Sweep Circuit.](./assets/servo_circuit_knob-pot.png)`
`75`	`75`
`76`	`76`	`## Examples`
`77`	`77`

Comments

(0)