Commit b5875ae

authored

Merge pull request #127 from arduino/benjamindannegard/portenta-h7-bootloader-update

benjamindannegard/ Updated bootloader update text

2 parents c2e8056 + 808c007 commit b5875aeCopy full SHA for b5875ae

File tree

-3

lines changed

-3

lines changed

Lines changed: 1 addition & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -50,7 +50,7 @@ The Arduino core for the Portenta H7 sits on top of the Mbed OS and allows to de`
`50`	`50`	`### Configuring the Development Environment`
`51`	`51`	`In this section, we will guide you through a step-by-step process of setting up your Portenta board for running an Arduino Sketch that blinks the built-in RGB LED.`
`52`	`52`
`53`		`-*In bootloader versions 22 and older there was a bug that could cause the board to get stuck in boot mode. This was fixed in the latest bootloader version. We strongly advise to update thebootloader before you proceed with the next step of this tutorial! Instructions can be found [here](../../tutorials/portenta-h7/updating-the-bootloader).*`
	`53`	`+*IMPORTANT: Please make sure to update the bootloader to the most recent version to benefit from the latest improvements. Follow [these steps](/tutorials/portenta-h7/updating-the-bootloader) before you proceed with the next step of this tutorial.*`
`54`	`54`
`55`	`55`	`### 1. The Basic Setup`
`56`	`56`	`Let's begin by Plug-in your Portenta to your computer using the appropriate USB C cable. Next, open your IDE and make sure that you have the right version of the Arduino IDE or the PRO IDE downloaded on to your computer.`

Lines changed: 2 additions & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -41,7 +41,8 @@ Using the OpenMV IDE you can run [MicroPython](http://docs.MicroPython.org/en/la`
`41`	`41`
`42`	`42`	`Before you can start programming OpenMV scripts for the Portenta you need to download and install the OpenMV IDE.`
`43`	`43`
`44`		`-*IMPORTANT: In bootloader versions 22 and older there was a bug that could cause the board to get stuck in boot mode. This was fixed in the latest bootloader version. Make sure you update the bootloader as explained in the "Flashing the OpenMV Firmware" section before you proceed with the next step of this tutorial!*`
	`44`	`+*IMPORTANT: Please make sure to update the bootloader to the most recent version to benefit from the latest improvements. Follow [these steps](/tutorials/portenta-h7/updating-the-bootloader) before you proceed with the next step of this tutorial.*`
	`45`	`+`
`45`	`46`
`46`	`47`	`Open the [OpenMV download](https://openmv.io/pages/download) page in your browser, download the version that you need for your operating system and follow the instructions of the installer.`
`47`	`48`

Lines changed: 3 additions & 1 deletion

Original file line number	Diff line number	Diff line change
`@@ -14,7 +14,9 @@ This tutorial uses the Arduino IDE. You can download the editor easily from`
`14`	`14`
`15`	`15`	`If you are using the Web Editor, you can follow the [getting started with the Web Editor tutorial](/cloud/web-editor/tutorials/getting-started/getting-started-web-editor).`
`16`	`16`
`17`		`-*IMPORTANT: In bootloader versions 22 and older there was a bug that could cause the board to get stuck in boot mode. This was fixed in the latest bootloader version. Make sure you update the bootloader as explained in the ["Updating the Portenta Bootloader"](https://docs.arduino.cc/tutorials/portenta-h7/por-ard-bl) tutorial*`
	`17`	`+*IMPORTANT: Please make sure to update the bootloader to the most recent version to benefit from the latest improvements. How to do so is explained in the ["Updating the Portenta Bootloader"](/tutorials/portenta-h7/updating-the-bootloader) tutorial*`
	`18`	`+`
	`19`	`+`
`18`	`20`
`19`	`21`	`### Boards using the Mbed core`
`20`	`22`

Comments

(0)