-
-
Notifications
You must be signed in to change notification settings - Fork 114
Closed
Assignees
Labels
Milestone
@majenkotech
Description
First compilation works perfectly. Second compilation crashes arduino-builder:
panic: runtime error: index out of range
goroutine 1 [running]:
panic(0x556bc0, 0xc420018130)
/home/jenkins/go/src/runtime/panic.go:500 +0x1a1
arduino.cc/builder.findIncludesUntilDone(0xc420060400, 0xc4202f5d40, 0x556f40, 0xc4201f90e0, 0xc420381162, 0x18, 0x0, 0x0)
/home/jenkins/workspace/arduino-builder-all-cross/src/arduino.cc/builder/container_find_includes.go:321 +0x138f
arduino.cc/builder.(*ContainerFindIncludes).Run(0x64d248, 0xc420060400, 0x41bc3c3c, 0x0)
/home/jenkins/workspace/arduino-builder-all-cross/src/arduino.cc/builder/container_find_includes.go:149 +0x5e4
arduino.cc/builder.runCommands(0xc420060400, 0xc42019fad8, 0x22, 0x22, 0x1, 0x0, 0x0)
/home/jenkins/workspace/arduino-builder-all-cross/src/arduino.cc/builder/builder.go:191 +0xcd
arduino.cc/builder.(*Builder).Run(0xc42019fd28, 0xc420060400, 0xc420045d88, 0x562240)
/home/jenkins/workspace/arduino-builder-all-cross/src/arduino.cc/builder/builder.go:124 +0xb9c
arduino.cc/builder.RunBuilder(0xc420060400, 0xc420045d88, 0x64d248)
/home/jenkins/workspace/arduino-builder-all-cross/src/arduino.cc/builder/builder.go:222 +0x35
main.main()
/home/jenkins/workspace/arduino-builder-all-cross/src/arduino.cc/arduino-builder/main.go:338 +0x99c
/home/matt/Downloads/arduino-1.8.2/arduino-builder returned 2
Environment
Core URL: https://raw.githubusercontent.com/chipKIT32/chipKIT-core/master/package_chipkit_index.json
Test board: chipKIT MAX32
Operating System: Linux (64 bit)
IDE version: 1.8.2
Steps to reproduce
- Install the required boards package and select the right board
- Install the required library (below)
- Paste in the test sketch and compile (succeeds)
- Compile again - fails.
Test Sketch
Required library: https://www.dimensionengineering.com/software/SabertoothArduinoLibraries.zip (though any contributed library may do it)
// playing with motor driver #include <SabertoothSimplified.h> #define MAIN_LED_PIN 13 SabertoothSimplified ST( Serial1 ); void setup() { pinMode( MAIN_LED_PIN, OUTPUT ); //SabertoothTXPinSerial.begin(38400); Serial1.begin( 38400 ); } void loop() { ST.motor(1, 127); // Go forward at full power. ST.motor(2, 127); delay( 2000 ); // Wait 2 seconds. ST.motor(1, 0); // Stop. ST.motor(2, 50); delay(2000); // Wait 2 seconds. ST.motor(1, -127); // Reverse at full power. ST.motor(2, -80 ); delay(2000); // Wait 2 seconds. ST.motor(1, 0); // Stop. ST.motor(2, -127 ); delay(2000); ST.motor( 2, 0 ); delay( 1000 ); // do heartbeat blink digitalWrite( MAIN_LED_PIN, HIGH ); delay( 500 ); digitalWrite( MAIN_LED_PIN, LOW ); delay( 500 ); }