Commit e60033f

committed

bootloaders: change instruction to match OSS release

1 parent c81d76f commit e60033fCopy full SHA for e60033f

File tree

+38

-19

lines changed

+38

-19

lines changed

Lines changed: 28 additions & 0 deletions

Original file line number	Diff line number	Diff line change
`@@ -0,0 +1,28 @@`
	`1`	+:floppy_disk: `bootloaders/PORTENTA_C33`
	`2`	`+====================================`
	`3`	`+Compiled with`
	`4`	+```bash
	`5`	`+git clone https://github.com/arduino/arduino-renesas-bootloader`
	`6`	`+git clone https://github.com/hathach/tinyusb`
	`7`	`+cd tinyusb`
	`8`	`+# This step is temporary`
	`9`	`+patch -p1 < ../arduino-renesas-bootloader/0001-fix-arduino-bootloaders.patch`
	`10`	`+python tools/get_deps.py ra`
	`11`	`+cd ..`
	`12`	`+cd arduino-renesas-bootloader`
	`13`	`+TINYUSB_ROOT=$PWD/../tinyusb make -f Makefile.c33`
	`14`	+```
	`15`	`+`
	`16`	+:rocket: `How to load bootloader`
	`17`	`+====================================`
	`18`	`+`
	`19`	`+Using any Portenta carrier with USB A connector, toggle the BOOT dip-switch, connect to the PC using a very uncommon USB-A to USB-A cable and reset the board.`
	`20`	`+The board will enumerate as Renesas RA USB Boot`
	`21`	`+`
	`22`	+Then flash the bootloader with [`rfp-cli`](https://www.renesas.com/us/en/software-tool/renesas-flash-programmer-programming-gui#download)
	`23`	+```
	`24`	`+rfp-cli -device ra -port $portname -p dfu_c33.hex`
	`25`	+```
	`26`	`+`
	`27`	`+Otherwise, the same hex file can be loaded through the SWD port (using a Jlink for example)`
	`28`	`+`

Lines changed: 0 additions & 9 deletions

This file was deleted.

Lines changed: 10 additions & 10 deletions

Original file line number	Diff line number	Diff line change
`@@ -1,17 +1,17 @@`
`1`	`1`	:floppy_disk: `bootloaders/UNO_R4`
`2`	`2`	`====================================`
`3`		`-Sources for Uno R4 WIFi at git@github.com:bcmi-labs/tinyusb.git , commit 185ae31ff15a1013a5a890455220a29bad1ed209`
`4`		`-`
`5`		`-Compiled with`
`6`		-```bash
`7`		`-cd examples/device/dfu && make BOARD=santiago_composta`
`8`		-```
`9`		`-`
`10`		`-Sources for Uno R4 Minima at git@github.com:bcmi-labs/tinyusb.git , commit b80fa8f4027c5aa4d9af5720a82e9238d8f792bb`
`11`		`-`
`12`	`3`	`Compiled with`
`13`	`4`	```bash
`14`		`-cd examples/device/dfu && make BOARD=santiago`
	`5`	`+git clone https://github.com/arduino/arduino-renesas-bootloader`
	`6`	`+git clone https://github.com/hathach/tinyusb`
	`7`	`+cd tinyusb`
	`8`	`+# This step is temporary`
	`9`	`+patch -p1 < ../arduino-renesas-bootloader/0001-fix-arduino-bootloaders.patch`
	`10`	`+python tools/get_deps.py ra`
	`11`	`+cd ..`
	`12`	`+cd arduino-renesas-bootloader`
	`13`	`+TINYUSB_ROOT=$PWD/../tinyusb make -f Makefile.minima`
	`14`	`+# TINYUSB_ROOT=$PWD/../tinyusb make -f Makefile.wifi`
`15`	`15`	```
`16`	`16`
`17`	`17`	:rescue_worker_helmet: `How to update ESP32-S3 firmware`

Comments

(0)