|
1 | | -/* |
2 | | - Blink |
3 | | - |
4 | | - Turns an LED on for one second, then off for one second, repeatedly. |
5 | | - |
6 | | - Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO |
7 | | - it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to |
8 | | - the correct LED pin independent of which board is used. |
9 | | - If you want to know what pin the on-board LED is connected to on your Arduino |
10 | | - model, check the Technical Specs of your board at: |
11 | | - https://www.arduino.cc/en/Main/Products |
12 | | - |
13 | | - modified 8 May 2014 |
14 | | - by Scott Fitzgerald |
15 | | - modified 2 Sep 2016 |
16 | | - by Arturo Guadalupi |
17 | | - modified 8 Sep 2016 |
18 | | - by Colby Newman |
19 | | - |
20 | | - This example code is in the public domain. |
21 | | - |
22 | | - http://www.arduino.cc/en/Tutorial/Blink |
23 | | -*/ |
24 | | - |
25 | 1 | #include "config.h" |
26 | 2 |
|
27 | 3 | // the setup function runs once when you press reset or power the board |
|
0 commit comments