.. currentmodule:: pyb

class Accel -- accelerometer control

Accel is an object that controls the accelerometer. Example usage:

accel = pyb.Accel()
for i in range(10):
 print(accel.x(), accel.y(), accel.z())

Raw values are between -32 and 31.

Constructors

Create and return an accelerometer object.

Methods

.. method:: Accel.filtered_xyz()

 Get a 3-tuple of filtered x, y and z values.

 Implementation note: this method is currently implemented as taking the
 sum of 4 samples, sampled from the 3 previous calls to this function along
 with the sample from the current call. Returned values are therefore 4
 times the size of what they would be from the raw x(), y() and z() calls.

.. method:: Accel.tilt()

 Get the tilt register.

.. method:: Accel.x()

 Get the x-axis value.

.. method:: Accel.y()

 Get the y-axis value.

.. method:: Accel.z()

 Get the z-axis value.

Hardware Note

The accelerometer uses I2C bus 1 to communicate with the processor. Consequently when readings are being taken pins X9 and X10 should be unused (other than for I2C). Other devices using those pins, and which therefore cannot be used concurrently, are UART 1 and Timer 4 channels 1 and 2.

此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。

如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。