compressive load

The process uses a polymer cap-and-cradle system in which the compressive load applied to each trace is precisely controlled ultrasonically to assure simultaneous, even distribution of energy.

* Maximum compressive load = 800,000 lb (approximately 363 metric tons).

In the current paper, an experimental study was conducted to investigate the hysteretic behavior of reinforced air-entrained concrete columns under alternative actions of freeze-thaw cycles and seawater corrosion when subjected to persistent eccentric compressive load. The crack development of the studied columns during the process of multiple attacks was also examined.

Typical failure modes of HSC mixes tested under compressive load: (a) R, (b) CM, (c) DM and (d) H.

Our previous study revealed that this structure could deliver a compressive load isotropically to cells in the scaffold, and it had an effect on cell proliferation [33, 34].

Web elements are sized, curved, oriented and comprised of varying thicknesses of material which facilitates buckling when subjected to a compressive load. By buckling, those elements in a deformed portion of the tire between a wheel and a footprint region where the tire contacts a surface can assume a significantly reduced portion of the load, if any.

The machine applied load axially on the cube specimen at constant rate until a minimum load which corresponds to the ultimate compressive load was recorded as the failure load for that cube.

The unique properties of metallic foams which are excellent in energy absorption will lead to better improvement of FRP composites especially when subjected to compressive load. Metal foams with open porosity have high specific surface areas which are excellent in energy absorption as well as heat transfer medium.