Tracking Issue: Planned CLI Features #46

esden commented 2025年07月04日 20:30:04 +02:00 (Migrated from github.com)

This issue tracks the command line interface tree. Related issues tracking subsections of this can and should be created when deemed useful.

This is a long term planning. We are looking for contributors interested in working on any of the upcoming features. Contact us via discord if you are interested.

• probe
  • info (—list-targets)
  • update (formerly flash and part of switch)
    • list (formerly releases)
  • switch (new: just switch the feature set of the firmware within the current active version)
  • config for probe eeprom parameters
  • reboot (—dfu, —repeat)
  • benchmark
  • install-drivers (formerly debug install-drivers on Windows)
• target
  • power
  • run (this is the equivalent of running load and attach one after another)
  • load (—verify, --skip-bytes [count])
  • erase (—mass, —unlock, ...)
  • reset
  • attach (--rtt-scan, --no-catch-reset, --no-catch-hardfault, --format, --use-serial [aux | unified], --serial-baud [baudrate] , --use-swo)
  • scan/ detect
• server
  • gdb
  • dap
  • trace
• debug
  • write-mem
  • read-mem
  • watch-mem
  • read-csr
  • write-csr
  • watch-csr
  • console
• complete
• help

This issue tracks the command line interface tree. Related issues tracking subsections of this can and should be created when deemed useful. This is a long term planning. We are looking for contributors interested in working on any of the upcoming features. Contact us via discord if you are interested. - [ ] `probe` - [x] `info` (—list-targets) - [x] `update` (formerly `flash` and part of `switch`) - [x] `list` (formerly `releases`) - [x] `switch` (new: just switch the feature set of the firmware within the current active version) - [ ] `config` for probe eeprom parameters - [x] `reboot` (—dfu, —repeat) - [ ] `benchmark` - [ ] `install-drivers` (formerly `debug install-drivers` on Windows) - [x] `target` - [ ] `power` - [ ] `run` (this is the equivalent of running `load` and `attach` one after another) - [ ] `load` (—verify, --skip-bytes [count]) - [ ] `erase` (—mass, —unlock, ...) - [ ] `reset` - [ ] `attach` (--rtt-scan, --no-catch-reset, --no-catch-hardfault, --format, --use-serial [aux | unified], --serial-baud [baudrate] , --use-swo) - [ ] `scan`/ `detect` - `server` - [ ] `gdb` - [ ] `dap` - [ ] `trace` - [ ] `debug` - [ ] `write-mem` - [ ] `read-mem` - [ ] `watch-mem` - [ ] `read-csr` - [ ] `write-csr` - [ ] `watch-csr` - [ ] `console` - [ ] `complete` - [x] `help`