Skip to main content
arXiv is now an independent nonprofit! Learn more
archive

Optics

See recent articles

Showing new listings for Thursday, 2 July 2026

Total of 26 entries
Showing up to 2000 entries per page: fewer | more | all

New submissions (showing 12 of 12 entries)

[1] arXiv:2607.00126 [pdf, other]
Title: Demodulating Digital Holograms with Unknown Uniform Phase-shifts by Spiral Phase Transform
Comments: 18 pages, 13 figures
Subjects: Optics (physics.optics)

The Spiral Phase Transform (SPT) is a generalization of the Hilbert transform for 2D signals and, as such, can be used for AC signal demodulation. However, phase demodulation with the SPT is complicated by a multiplicative term that depends on the fringe directional map. We derived an analytical formula for the twofold directional map and applied the SPT for the blind reconstruction of phase-shifted digital holograms. Possible phase ambiguities in the unfolded directional map were resolved by satisfying the spatial uniformity condition of the phase shifts. The method was experimentally verified using on-axis and off-axis digital holograms of specularly reflecting subjects.

[2] arXiv:2607.00285 [pdf, other]
Title: X-ray Coherent Attosecond Pulse Pair Spectroscopy
Subjects: Optics (physics.optics)

X-ray free electron laser (XFEL) experiments using self-amplified spontaneous emission (SASE) pulses typically achieve temporal resolutions of order several femtoseconds, as the pulse duration puts a practical limit to pump-probe or probe-probe schemes. Even with the emerging capabilities to generate pulses with attosecond durations with new single-spike SASE schemes, direct access to attosecond electron dynamics remains an experimental challenge. Here we show how X-ray coherent attosecond pulse-pair spectroscopy (X-CAPPS) provides a powerful new approach to access the ultrashort time-delay window. Coherent attosecond pulse pairs with time delays varying from ~500 as to ~5 fs are generated with Cu K$\alpha_1$ stimulated X-ray emission from a gain medium pumped by intense SASE XFEL pulses. These pulse pairs are analyzed with two subsequent Bragg crystal spectrometers, and the resulting interference spectrum is captured on two sequential 2D image detectors encoding their time separation, relative amplitudes, and phases with high precision. X-CAPPS requires no split-and-delay X-ray optics, nor XFEL pulse modifications, making it broadly implementable across existing facilities. This technique enables the investigation of attosecond processes with $\mathring{A}$ngström resolution, providing a new tool for probing ultrafast dynamics across a wide range of atomic, molecular, and solid systems.

[3] arXiv:2607.00290 [pdf, html, other]
Title: Finite slab first passage statistics of Henyey Greenstein scattering
Subjects: Optics (physics.optics)

A photon entering a plane parallel scattering slab performs a random walk and eventually escapes through one of the two faces or is absorbed. The scattering distribution is a Henyey Greenstein phase function and the step length distribution is exponential. The central result of this paper is that the reflectance, transmittance, absorptance, and emergent angular distributions can all be expressed in terms of the first passage statistics of the walk. Two approaches are used. In the Monte Carlo MC approach, an extremely long random walk with many steps is efficiently generated without regard to any boundaries. The intersection of this walk with a large collection of target objects creates an ensemble of excursions of the objects. The MC approach relies explicitly on the memoryless property of the exponential distribution so that the portion of the first and last steps inside the object follow the same length distribution as the walk steps. The details of each excursion are recorded and any statistics can be extracted, to the sampling precision, from the database of excursions. In particular, first passage statistics are extracted from this ensemble. In this work the objects are slabs with different positions and thicknesses. In the radiative transfer RT approach the slab is divided into thin layers with scattering treated to first order in each layer. The RT equations are then directly integrated over the slab to give the desired first passage statistics. In the RT approach reflection, transmission and absorption are found to the precision of the RT solver. The two methods agree to the precision of the MC over the tested range of random walk parameters.

[4] arXiv:2607.00468 [pdf, other]
Title: Finite-Size Effect Induced Spatial-Spectral Mode Splitting in Membrane Metasurfaces
Subjects: Optics (physics.optics)

This work reports the spatial-spectral engineering and finite-size quantization of optical modes within a triangular-lattice silicon nitride membrane metasurface. Truncating the lattice into a finite square cavity breaks translational symmetry and lifts modal degeneracy, splitting optical modes into discrete cavity-envelope sub-modes. High-resolution photoluminescence (PL) scanning reveals distinct spatial field distributions. The corner-localized sub-mode features the highest Q-factor due to multipolar far-field destructive interference, whereas the core-localized sub-mode exhibits strong radiative coupling. PL mapping reveals a symmetric, four-fold clover-like wavelength arrangement. These results demonstrate that boundary-induced deterministic symmetry can override underlying lattice characteristics, offering a robust strategy for precise spatial-spectral tailoring of light-matter interactions at the nanoscale.

[5] arXiv:2607.00615 [pdf, other]
Title: Evanescent absorption spectroscopy of transition metal dichalcogenide materials using guided photoluminescence in Si$_3$N$_4$ photonic waveguides
Victor Gonzalez-Morote (1), Marianna Sledzinska (2), Arkadiusz P. Gertych (3), Syed Hassan Abbas Jaffery (3), Mariusz Zdrojek (3), Daniel Navarro-Urrios (1) ((1) MIND-IN2UB, University of Barcelona, Barcelona, Spain, (2) Catalan Institute of Nanoscience and Nanotechnology (ICN2), Bellaterra, Spain, (3) Faculty of Physics, Warsaw University of Technology, Warsaw, Poland)
Comments: 25 pages, 3 figures; Supporting Information included (6 figures). Submitted to ACS Applied Materials & Interfaces
Subjects: Optics (physics.optics); Mesoscale and Nanoscale Physics (cond-mat.mes-hall)

On-chip integration of two-dimensional transition metal dichalcogenides (TMDs) with photonic waveguides underpins a growing class of compact optoelectronic and sensing devices, whose performance depends on the optical absorption of the 2D material in this integrated environment. We demonstrate source-free, on-chip evanescent absorption spectroscopy of MoS$_2$ and WS$_2$ flakes integrated on Si$_3$N$_4$ waveguides, in which the broadband defect-related photoluminescence of the Si$_3$N$_4$ core itself acts as the internal probe. Light generated inside the core propagates under the TMD flake and is spectrally attenuated by evanescent interaction with the 2D material, and normalizing the transmitted spectrum to a reference waveguide without TMD yields the energy-dependent absorption response without any external illumination. The extracted guided absorption agrees with Raman and local micro-photoluminescence characterization and resolves differences between spatially uniform and non-uniform flakes. A complementary top-pumping scheme recovers guided WS$_2$ photoluminescence, whose spectral reshaping during propagation is quantitatively reproduced by the measured absorption. This source-free platform qualifies 2D materials in their integrated photonic environment and provides a direct route toward waveguide-integrated TMD photodetectors and sensors.

[6] arXiv:2607.00618 [pdf, html, other]
Title: Generation of strongly localized skin solitons in non-Hermitian waveguide arrays with the Kerr effect
Comments: to be published in Phys. Rev. A
Subjects: Optics (physics.optics)

We address two distinct nonlinear propagation problems in nonlinear optical waveguide arrays (WGAs) with non-reciprocal (non-Hermitian) couplings. First, we investigate the light propagation launched by initial excitations of two different types. The single-channel excitation creates stable solitons supported by the interplay of the Kerr nonlinearity and non-Hermitian skin effect (NHSE). In this case, we derive, by means of the symbolic-regression method, an analytical formula defining the soliton existence boundary. For the broad-pulse excitation, we produce perturbed soliton solutions analytically in the continuum approximation, which is accurately corroborated by numerical results. We thus conclude that NHSE accelerates the propagation of the broad soliton towards the boundary, ultimately causing tight localization at the edge, which is a hallmark of the NHSE in the continuum limit. Second, we identify stationary solitons in the system -- specifically, nonlinear bulk modes in the Hermitian regime and near-edge skin solitons in the non-Hermitian one. The nonlinear bulk modes are compressed toward the edge of the WGA under the action of the non-reciprocality, which is the nonlinear extension of NHSE.

[7] arXiv:2607.00657 [pdf, html, other]
Title: Self-selected phase-matched second harmonic generation in nonlinear optical materials: from phenomenon to applications
Comments: 10 pages, 4 main figures and 4 supplementary figures
Subjects: Optics (physics.optics); Materials Science (cond-mat.mtrl-sci)

Self-selected phase-matched second harmonic generation is introduced as an all-optical probe of refractive-index dispersion in birefringent nonlinear optical materials. Rather than requiring wavelength or angular tuning, the exposure with a spectrally broad, intense ultrashort pulse allows the material to self-select the fundamental spectral component that satisfies the type-I noncritical phase-matching condition. This produces a narrow peak in the second harmonic spectrum whose position is governed by the refractive indices and is therefore highly sensitive to material parameters that affect the optical dispersion. We demonstrate the application of this phenomenon for the optical inspection of stoichiometry and temperature gradients in technologically relevant lithium niobate, as well as composition inhomogeneities in newly grown lithium niobate-tantalate solid solutions. These results establish self-selected phase-matched second harmonic generation as a rapid, non-contact method for inspecting nonlinear optical materials, with potential relevance for bulk crystals, wafers, and thin-film platforms.

[8] arXiv:2607.00694 [pdf, html, other]
Title: Near-Field Characterisation of Guided Modes in WS2 Nanobeams and Quasi-Bulk Crystals
Comments: 12 pages, 5 figures + Supplementary Information
Subjects: Optics (physics.optics); Mesoscale and Nanoscale Physics (cond-mat.mes-hall); Materials Science (cond-mat.mtrl-sci); Applied Physics (physics.app-ph)

The exceptionally high in-plane refractive index, low sub-bandgap absorption, and strong optical anisotropy of WS2 make it a promising material platform for next-generation integrated circuits for nanophotonics. Its layered van der Waals structure further enables heterogeneous integration with silicon photonics and emerging two-dimensional optoelectronic materials. However, despite increasing interest in the waveguiding properties of WS2, experimental studies of wavelength-dependent modal confinement and attenuation remain limited. Additionally, though the extinction coefficient of WS2 is expected to be near-negligible beneath the bandgap, reported values span orders of magnitude, leading to large uncertainty in predicted modal decay lengths and wafer-scale integration feasibility. To resolve these ambiguities we perform hyperspectral cavity-enhanced imaging, determining high-resolution upper and lower bounds on the extinction coefficient of WS2 within the visible-NIR edge. We further employ scattering-type scanning near-field optical microscopy (s-SNOM) to probe TE0, TM0, and higher-order modes in both quasi-bulk and nanobeam WS2 waveguides across the 800-1400 nm spectral range, enabling identification of mode-specific trends in wavevector dispersion and loss. This work simultaneously assesses s-SNOM as a probe of waveguide performance, and we find that while absolute loss values depend on measurement geometry, s-SNOM reliably captures relative modal trends and provides upper bounds on propagation loss, supporting its use as a diagnostic tool for anisotropic waveguides. We further identify significant artefacts in nanobeam measurements arising from transverse interference and spatial sampling effects when the structure size approaches the excitation wavelength, which can shift extracted effective indices by up to 0.25.

[9] arXiv:2607.00706 [pdf, html, other]
Title: Universal Design Path for Optomechanical Crystals and One-dimensional Photonic Crystals
Comments: 21 pages, 12 figures
Subjects: Optics (physics.optics)

We have shown a pattern that connects the refractive index, area and the cavity modes of the optomechanical crystals (OMCs) by the same order function. By keeping the fundamental and second cavity modes within a range of -+16 nm and -+23 nm we have shown the link between the design area of the OMC and the refractive index of the material, by keeping the design area same we have shown the link between the refractive index and the cavity mode wavelength and by keeping the refractive index the same, we have shown the link between the cavity mode wavelength and the design area. We have performed simulations for 2 different OMC designs and 10 different refractive indices (9 different materials) to prove the first two claims and we have performed both simulations and experiments on a 3C-SiC OMC, which resulted as 100 nm shift of the second cavity mode, to prove the last claim. Our findings prove that a universal design for optomechanical crystals is possible, making the transition to different material bases easier to exploit their specific properties, suggesting a path to commercialize such devices for hybrid quantum technologies and having flexibility of tuning such devices for their own relative applications.

[10] arXiv:2607.00739 [pdf, other]
Title: On-Demand Coherent Nanolaser Metalens and Beam Steering Enabled by Physics-Informed Neural Networks
Subjects: Optics (physics.optics)

The integration of artificial intelligence with physical modeling offers a transformative route for accelerating the design of active nanophotonic devices. Here, we present NanoPhotoNet-Lase, a physics-informed neural network (PINN) framework that embeds the electromagnetic and rate equations of lasing directly into its learning process to expedite the design of metasurface nanolasers. By coupling Maxwell's vector Helmholtz equation with the four-level population dynamics of dye gain media, the model achieves physics-guided prediction of optical responses, enabling rapid estimation of lasing thresholds across arbitrary nanostructure geometries and material configurations. Using high-index metasurfaces cavity, the NanoPhotoNet-Lase model identifies optimized geometries supporting quasi-bound states in the continuum (BICs) with strong confinement and high-quality factors. The predicted lasing was experimentally realized using Rhodamine B dye as gain medium. The measured lasing threshold (Pth = 565 uJ/cm2) and emission wavelength of 620 nm exhibited below 1% deviation from model predictions. Importantly, the framework enables design phase-gradient nanolaser metalens and beam steering that demonstrated coherent, directional, focused or steered emission. This work bridges physics-informed machine learning with experimental nanophotonics, establishing a scalable paradigm for real-time, physically interpretable design of coherent light-emitting metasurfaces.

[11] arXiv:2607.00822 [pdf, other]
Title: Axion Polarimetric Experiment (APE)
Comments: 16 pages, 11 figures
Subjects: Optics (physics.optics); Instrumentation and Detectors (physics.ins-det)

We present the Axion Polarimetric Experiment (APE), a cavity-enhanced polarimeter designed to search for ultralight axion and axion-like-particle dark matter through a time-dependent rotation of the linear polarization of laser light. In cavity-based schemes, intracavity quarter-wave plates can restore coherent buildup of the axion-induced orthogonal polarization, but their transmissive loss limits the achievable finesse. To avoid transmissive intracavity optics, we propose a folded Fabry-Perot cavity that employs dielectric phase-shifting mirrors. At an incidence angle near 45ドル^\circ,ドル these mirrors provide a reflection-phase difference $\Delta\phi \equiv \phi_s-\phi_p \simeq \pi/2$ between $s$ and $p$ polarizations and therefore act as reflective quarter-wave plates. We present the coating design, thickness optimization, and measurements of the phase shift and optical loss of the phase-shifting mirrors. Using a heterodyne polarimetric readout and an explicitly stated noise model, we derive design-level sensitivity projections for the axion-photon coupling $g_{a\gamma\gamma}$. These projections should be interpreted as target sensitivities for the proposed cavity configuration, since the full-system birefringence noise and angular-jitter coupling remain to be measured.

[12] arXiv:2607.01098 [pdf, html, other]
Title: Room temperature valley coherence in monolayer WSe2 mediated by chiral nematic liquid crystal
Comments: 29 pages, 4 figures
Subjects: Optics (physics.optics)

Valley coherence refers to a phase-coherent superposition of inequivalent momentum valleys, in which quantum information can be encoded in the relative valley phase. Chiral nematic liquid crystals, by imposing a flip of the spin angular momentum upon light reflection, provide an effective photonic environment for optically coupling excitons of the K and K' valleys in monolayer semiconducting transition-metal dichalcogenides. We experimentally demonstrate that using such liquid crystal as a substrate, it is possible through nearfield interaction to engineer a room temperature mechanism for inducing the intervalley coupling. Our results show that this approach provides a simple and scalable route toward valleytronic functionalities based on controlled coherent emission from valleys with opposite Berry curvature.

Cross submissions (showing 4 of 4 entries)

[13] arXiv:2607.00463 (cross-list from quant-ph) [pdf, other]
Title: Bridging quantum mechanics and nonlinear optics in Raman scattering
Comments: 18 pages
Subjects: Quantum Physics (quant-ph); Optics (physics.optics)

We present a theoretical framework for spontaneous Raman scattering that fundamentally bridges quantum-mechanical and nonlinear-optical approaches. By conceptualizing spontaneous Raman scattering as a stimulated Raman gain or loss event seeded by the quantum vacuum field, we rigorously derive the spontaneous Raman cross-section directly from the third-order nonlinear susceptibility. Crucially, this framework predicts the existence of a hitherto unrecognized phenomenon: "spontaneous Raman loss" (sRL), which acts as the vacuum-seeded counterpart to stimulated Raman loss, complementing traditional spontaneous Raman scattering (spontaneous Raman gain, sRG). Furthermore, we establish a rigorous connection to the traditional Kramers-Heisenberg-Dirac (KHD) theory, revealing that the spontaneous process is governed by interference before a detector between the signal field emitted from molecules and the vacuum field itself that stimulates the molecules. This insight uncovers a direct correspondence between the sRG susceptibility and the rotating/counter-rotating interference terms in the KHD formula. Ultimately, we extend the foundational KHD theory by incorporating previously unrecognized essential terms, achieving perfect analytical agreement between the quantum mechanical and nonlinear optical descriptions of Raman scattering.

[14] arXiv:2607.00484 (cross-list from physics.bio-ph) [pdf, html, other]
Title: When is vaccine prioritization worth optimizing?
Subjects: Biological Physics (physics.bio-ph); Adaptation and Self-Organizing Systems (nlin.AO); Computational Physics (physics.comp-ph); Optics (physics.optics)

Optimizing vaccine prioritization is often treated as the default policy response when vaccine supply is limited. Yet optimized prioritization carries administrative, ethical and communication costs, motivating an upstream question: whether differences among vaccine allocations can alter epidemic outcomes enough to make optimization epidemiologically necessary. We show that optimization is not always worth pursuing: in some regimes, vaccination markedly reduces epidemic burden, but many feasible allocation rules perform almost equally well, making the necessity of optimization low. We quantify this necessity as the range of epidemic outcomes generated by different allocations under fixed supply and show that it is governed by competition between vaccinating high-contact groups to slow transmission and vaccinating groups that benefit most directly: necessity is low when these protection routes are balanced and high when one dominates. Increasing transmission intensity changes this balance and drives a transition in the optimal allocation from transmission-focused prioritization toward direct protection. Different prevention objectives exhibit distinct transition thresholds, creating regimes in which optimizing one objective substantially compromises another, thereby revealing when the choice of prevention target matters most. This framework reframes vaccine prioritization as a prior decision problem, identifying when optimization is warranted, when simpler rules suffice, and when prevention goals conflict.

[15] arXiv:2607.00689 (cross-list from physics.ins-det) [pdf, other]
Title: In-Situ Polarimetry in Collimated Magneto-Infrared Spectroscopy System
Journal-ref: Advanced Science Instruments,1(1),100005.(2026)
Subjects: Instrumentation and Detectors (physics.ins-det); Materials Science (cond-mat.mtrl-sci); Strongly Correlated Electrons (cond-mat.str-el); Optics (physics.optics)

Magneto-infrared spectroscopy under strong magnetic fields provides a powerful probe of Landau quantization and field-induced collective excitations, yet its full potential has long been constrained by the lack of in-situ polarization control, because the highly divergent infrared beam propagating through narrow light tubes undergoes multiple wall reflections, leading to severe polarization degradation. Here we report a collimated magneto-infrared spectroscopy system that integrates continuous in-situ polarimetry. The system employs incident and exit collimation chambers forming a Kepler type optical architecture, which converts the large-aperture FTIR output into a low-divergence beam and strongly suppresses multi-reflection trajectories inside long gold-plated light tubes, thereby enhancing both optical throughput and polarization fidelity. A remotely controlled polarization module, consisting of an automated linear polarizer and a switchable Fresnel rhomb positioned entirely outside the high-field region, enables continuous in-situ tuning between linear, circular, and arbitrary elliptical polarization states without thermal cycling, manual realignment, or breaking vacuum. Interchangeable compact focusing modules further support Faraday and Voigt geometries in both transmission and reflection experiments within a 50 mm magnet bore, providing efficient beam focusing and signal collection while maintaining polarization fidelity. The setup achieves a minimum root-mean-square noise of 0.0033%, an average noise of 0.0082%, and a linear polarization extinction ratio up to 40:1. We demonstrate the capability through continuous in-situ linear polarimetry and broadband circular polarimetry in the magneto-infrared spectroscopy of various single crystals. This platform establishes a robust experimental framework for in-situ polarization-resolved magneto-infrared spectroscopy.

[16] arXiv:2607.01123 (cross-list from physics.ins-det) [pdf, html, other]
Title: Plenoptic imaging of particle interactions in scintillation detectors
Subjects: Instrumentation and Detectors (physics.ins-det); Signal Processing (eess.SP); Optics (physics.optics)

Accurate 3D localization of radiation interactions in scintillation detectors is essential for nuclear and particle physics, safeguards, and medical imaging, but remains difficult in light-starved regimes with limited photon statistics. We present PRISM, a multifocal plenoptic imaging system designed for millimeter-scale 3D position reconstruction in a single-volume scintillator. PRISM uses a multifocal microlens array with diverse focal lengths and high effective numerical aperture to balance photon collection with spatial and depth encoding. A Cram'er--Rao lower bound analysis shows that the multifocal design improves axial sensitivity over conventional unifocal plenoptic systems under photon-limited conditions. We build a prototype system, calibrate its optical response with a tunable light source, and form photon-limited measurements with $\mathcal{O}(100)$ detected photons. For sparse single-vertex events, we reconstruct interaction locations using an Alternating Descent Conditional Gradient-inspired algorithm and demonstrate an average 3D localization error of approximately 1 mm. We also provide an initial evaluation of double-vertex events, showing that localization improves as the axial separation between interactions increases. These results demonstrate that multifocal plenoptic imaging can mitigate the traditional trade-off between light collection and spatial resolution, providing a photon-efficient approach to 3D reconstruction in scintillation detectors and a foundation for future multi-scattering event reconstruction.

Replacement submissions (showing 10 of 10 entries)

[17] arXiv:2509.06679 (replaced) [pdf, html, other]
Title: Topological Localisation in Time from PT Symmetry
Subjects: Optics (physics.optics)

Time has entered the domain of topological phases in the field of non-Hermitian physics. Previous studies have relied on periodic modulation in time to make an intuitive connection to established spatial topological invariants, albeit with energy and momentum exchanged. This connection has revealed the potential for topological interface states along the time axis, analogous to those in spatial models. In this work, we uncover a theoretical framework describing such topological interface states along the time axis, with no underlying connection to spatial models nor need for periodic driving. This new framework uncovers that this phenomenon -- the robust localisation of waves at an interface -- appears in every system that has parity-time symmetry and two coupled modes or bands, regardless of its spatial dimensionality. The topological nature of this localisation is understood by the identification of certain topological phases that are specific to parity-time-symmetric models of two coupled modes. Our theoretical framework can be applied to all existing experimental observations, notably including photonic time crystals, and serves as a foundation for future experiments in areas in which the topological localisation of waves in time has yet to be studied.

[18] arXiv:2509.10235 (replaced) [pdf, html, other]
Title: Digital holographic imaging for free surfaces of superfluid helium
Comments: 18 pages, 12 figures, accepted manuscript
Subjects: Optics (physics.optics)

Visualising the free surface of superfluid helium offers a rare opportunity to explore wave dynamics in the limit of vanishing viscosity. Such measurements are nonetheless challenging due to helium's low refractive index contrast, restricted optical access to the cryogenic setups required to maintain helium in its superfluid phase, and mechanical vibrations from the various cooling stages. Overcoming these limitations will enable quantitative studies of surface-wave dynamics with applications in fluid mechanics, quantum simulation, and quantum optomechanics. Here we report an implementation of off-axis digital holography for full-field imaging of the free surface of superfluid $^\text{4}$He. We perform non-contact measurements of nanometre- to micrometre-scale interface fluctuations in two cryogenic systems: a traditional helium bath cryostat and a cryogen-free refrigerator. We employ machine-learning-based analysis to isolate noise-driven normal modes and their spatial structure in both systems. This enables reconstruction of the dispersion relation for gravity-capillary waves in macroscopic samples and, for thick films, determination of the film thickness from the measured dispersion, providing a quantitative benchmark for our approach. These proof-of-concept experiments show that digital holography is a powerful and versatile tool for high-resolution, minimally invasive studies of superfluid surfaces, with strong potential for integration into diverse experimental platforms.

[19] arXiv:2510.03976 (replaced) [pdf, html, other]
Title: Equilateral triangular waveguides, modal structure, attenuation characteristics and quality factor
Comments: Corrected integrals for contours c2 and c3. Overall analysis and final conclusions unchanged
Journal-ref: Physica Scripta, 23 June 2026
Subjects: Optics (physics.optics)

Equilateral triangular waveguides are one of the very few special kind of waveguides, whose field solutions can be constructed without necessarily solving the Maxwell's equations. Solutions can be obtained simply by superposing some plane wave solutions and requiring the solutions to obey the necessary boundary conditions for each modes, as would be expected of any Maxwell equation's solution or that of any Helmholtz equation resulting from the problem of Heat flow, membrane vibrations, etc. In fact, this was how one of the earlier solutions or eigen functions found by Gabriel Lamé, were obtained. Julian Schwinger, performed the same analysis, but used the superposition of complex exponential functions, in order to obtain the eigen functions of an equilateral triangular waveguide. The solutions exhibit other special symmetric properties that leave their solutions invariant and these special symmetries and applications, are what we investigate in this work, particularly as it relates to their attenuation characteristics and quality factors. Finally, by employing the number theory of Eisenstein integers or primes we have obtained a well ordered and more rigorous eigenvalues of the equilateral triangular waveguides, which is definitely something missing in the literature.

[20] arXiv:2512.07784 (replaced) [pdf, html, other]
Title: Spatio-temporal equilibrium thermodynamics of guided optical waves at positive and negative temperatures
Comments: 22 pages, 10 figures
Journal-ref: Phys. Rev. A 113, 063533 (2026)
Subjects: Optics (physics.optics)

Optical thermalization has been recently studied in the 2D spatial evolution of (quasi-)monochromatic light waves propagating in multimode waveguides. Here, we investigate the spatio-temporal equilibrium properties of optical waves through the analysis of the (2+1)D Bose-Einstein thermal distribution and the corresponding classical Rayleigh-Jeans approximation. Numerical simulations of the nonlinear Schrödinger equation (NLSE) demonstrate relaxation toward the spatio-temporal Rayleigh-Jeans equilibrium state, as described by the corresponding wave turbulence kinetic equation. Remarkable adiabatic cooling phenomena stemming from the high-frequency tails of the Rayleigh-Jeans distribution are discussed and the consequent limitations of the classical approximation are highlighted. To overcome these issues, we make use of a quantum version of the NLSE whose associated kinetic equation describes relaxation toward the spatio-temporal Bose-Einstein equilibrium distribution. The analysis of thermodynamic properties reveals a strong dependence on the dispersion regime. In the anomalous dispersion regime, the system relaxes to positive-temperatures equilibrium states: as the number of modes of the waveguide increases, the fundamental spatial mode becomes macroscopically populated, while its temporal spectrum undergoes significant narrowing, ultimately leading to complete (2+1)D spatio-temporal condensation in the thermodynamic limit. In the normal dispersion regime, the system evolves toward negative-temperature equilibrium states characterized by an inverted spatial modal population. In this regime, we predict a phase transition to Bose-Einstein condensation at negative temperatures, which occurs by increasing the temperature above a negative critical value. Our work opens new avenues for future research and lay the groundwork for the development of spatiotemporal optical thermodynamics.

[21] arXiv:2602.04724 (replaced) [pdf, html, other]
Title: Photo-birefringent effects in crystalline AlGaAs mirror coatings
Journal-ref: Opt. Express 34, 25456-25468 (2026)
Subjects: Optics (physics.optics)

High-reflective crystalline $GaAs/Al_{0.92}Ga_{0.08}As$ coatings show reduced Brownian noise compared to conventional dielectric coatings. However, several ultra stable laser systems observed additional noise sources that hinder the realization of the expected improvements in frequency stability. These additional noise sources are related to the birefringence of the coatings and its modification by intracavity light. The origin of the birefringence is not yet well understood and its modification via illumination remains unexplained. Here we present an extensive study on the steady-state and transient modification of the birefringence by intracavity light and by uniform illumination at various wavelengths using an optical cavity at room temperature. We find a unified description that suggests a primary two-photon process for photon energies below the bandgap of GaAs, or a single-photon process at higher energies. Adding external illumination allows to reduce noise induced by laser power fluctuations by balancing the photo-thermal-optic response of the mirrors and the photo-birefringent effect at a more favorable low intracavity power.

[22] arXiv:2604.02262 (replaced) [pdf, other]
Title: Theory of Lineshapes in Optical-Optical Double Resonance Spectroscopy
Comments: 36 pages, 18 figures
Subjects: Optics (physics.optics); Chemical Physics (physics.chem-ph)

This paper presents lineshapes for molecular Optical-Optical Double Resonance (DR) Spectroscopy with arbitrary strength for both pump and probe field using the steady-state solutions for the 3-level density matrix. When the Doppler broadening can be neglected, the results are analytical, and the probe spectrum is a pair of Lorentzian lines that display Autler-Townes splitting, and each has an angular frequency half-width half maximum equal to the relaxation rates, which are all assumed equal. When Doppler broadening is introduced, one must resort to numerical integration except for the limit of weak pump and probe fields. When the Doppler width is assumed much larger than the pump and probe Rabi Frequencies, the calculated DR lineshapes are found to be Lorentzian with a strong pump field limit that is proportional to the pump Rabi frequency, what is commonly known as power broadening. However, the width does not equal the Rabi frequency and is different for co- and counter-propagating pump and probe fields. Furthermore, that broadening is largely inhomogeneous, despite the Lorentzian shape. The saturation power is found to be about 4 times higher than for the bare probe transition with the same relaxation rate, dramatically lower than that expected if the width is interpreted as homogeneous.

[23] arXiv:2605.20855 (replaced) [pdf, html, other]
Title: Local Chiral Optical Responses in Phthalocyanine Molecular Assemblies Revealed by Photoinduced Force Microscopy
Comments: 7 pages, 5 figures, supporting information included; updated version corresponding to the initial journal-submitted manuscript, with revised computational conditions, numerical results, and refined conclusions
Subjects: Optics (physics.optics); Applied Physics (physics.app-ph)

Photoinduced force microscopy (PiFM) provides a force-based probe of nanoscale polarization-dependent molecular excitations. Here, we theoretically investigate PiFM images of zinc phthalocyanine assemblies using the discrete dipole approximation with nonlocal molecular susceptibilities. Under linearly polarized illumination, intermolecular dipole coupling splits the molecular resonance into bonding and antibonding modes. These modes produce distinct force distributions: bonding modes enhance signals at molecular termini, whereas antibonding modes localize responses in intermolecular regions, reflecting collective intermolecular polarization modes. Under circularly polarized illumination, intermolecular coupling and anisotropic molecular packing generate spatially varying local circular dichroism signals with enhanced asymmetric force factors. These results establish PiFM as a real-space probe of collective polarization modes and coupling-induced local chiral optical responses.

[24] arXiv:2601.13909 (replaced) [pdf, other]
Title: Superradiance of entangled photon pairs from a high-density chip-scale Cs vapor cell
Subjects: Quantum Physics (quant-ph); Atomic Physics (physics.atom-ph); Optics (physics.optics)

Superradiance is one of the most fundamental collective quantum phenomena in light-matter interactions and has been studied extensively since Dicke's seminal work. However, its practical implementation remains challenging because superradiant enhancement requires strict experiment conditions for strong collective coupling among emitters. Can superradiance emerge in a simple platform, such as an atomic vapor cell composed of thermally moving atoms? To address this question, we identify the key signatures of superradiance in a hot atomic ensemble and find a use case of superradiance using an atomic vapor cell. Here, the Photon-Pair SuperRadiance (PPSR) process in an atomic vapor cell provides a novel approach to generating superradiant quantum light from a practical atomic platform. We experimentally demonstrate a superradiant entangled photon-pair generation via PPSR process in a high-density, 1-mm-long chip-scale Cs vapor cell. The hot, dense atomic vapor cell allows the mean interatomic distance in the Doppler-broadened atomic ensemble to be reduced to 0.29 times the idler-photon wavelength, satisfying the condition for cooperative emission. The thin chip-scale geometry enables high atomic densities while mitigating the reabsorption of emitted photons and maintaining moderate optical depth. In this subwavelength regime, we clearly observe the temporal narrowing of the biphoton wavefunction from 0.60 ns to 0.17 ns due to a superradiant decay. This pronounced temporal compression provides strong evidence of collective superradiant emission in the chip-scale Cs vapor cell. Our PPSR source delivers a detected photon-pair rate exceeding 10^6 pairs/s while maintaining a high coincidence-to-accidental ratio of 280.

[25] arXiv:2605.15385 (replaced) [pdf, html, other]
Title: Single Spatio-Temporal Mode Bright Twin-Beam Source Across the Near- and Mid-Infrared
Subjects: Quantum Physics (quant-ph); Optics (physics.optics)

We introduce an ultrafast, bright, entangled twin-beam source generated by type-0 parametric down-conversion in periodically-poled lithium niobate at MHz repetition rate, with continuously tunable Schmidt number $K$ set by the pump pulse duration. Photon-number statistics characterization via $g^{(2)}(0)$ and singular-value decomposition of the signal spectral density matrix yield $K\simeq1.05$ and $K\simeq1.03,ドル respectively, maintained over multiple orders of magnitude in brightness. Group-delay dispersion of the pump drives a continuous transition from single-mode operation to a controlled multimode regime, consistent with the temporal gain window departing from the inverse phase-matching bandwidth. Strong non-degeneracy of the source (signal at 1.37 um, idler at 4.0 um, $\sim 100$ fs duration) decouples a mid-infrared interaction wavelength, which overlaps with molecular vibrational resonances, from a near-infrared detection band, establishing a practical platform for quantum-enhanced metrology, nonlinear interferometry, and mid-infrared spectroscopic sensing. We show that in the bright few-mode limit, the total entanglement resource is clearly separated between modal and occupational degrees of freedom, and that our source allocates up to 95-97% of that resource to the occupational sector.

[26] arXiv:2605.17988 (replaced) [pdf, other]
Title: A Computationally Efficient Reciprocal Effective Roughness Model for Diffuse Scattering
Subjects: Signal Processing (eess.SP); Optics (physics.optics)

Ray-tracing (RT) has become central to site-specific electromagnetic propagation modeling in dynamic complex environments. Yet its computational burden grows sharply as high-fidelity digital twins of these environments scale to millions of facets whose material parameters must be continuously updated as the environment changes. The challenge is amplified at mmWave and sub-THz frequencies, where surface roughness becomes comparable to the wavelength and so diffuse scattering can account for up to 40% of the received power, making accurate yet tractable models essential. The popular Effective Roughness (ER) approach offers physical consistency but become increasingly costly when highly directive lobes are required or when parameters must be iteratively tuned. This communication introduces a directive, reciprocal diffuse scattering model that preserves the structure of the ER while enabling an order-of-magnitude reduction in computational cost. Validation across eight materials shows no loss in accuracy - and a slight improvement - demonstrating a scalable and physically meaningful solution for RT in scenarios where diffuse scattering is non-negligible.

Total of 26 entries
Showing up to 2000 entries per page: fewer | more | all

AltStyle によって変換されたページ (->オリジナル) /