I was trying to display the readings of my dht11 sensor on the Blynk dashboard but I am struggling a lot. A little help would be really appreciated.

#define BLYNK_PRINT Serial
/* Fill in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID "TMPL3cu_fjr1u"
#define BLYNK_TEMPLATE_NAME "DHT11 Example"
#define BLYNK_AUTH_TOKEN "bpPlBa8ehOqw0sJLKJeO1thMlulVXUCY"
#include <DHT.h>
#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32.h>
// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "***";
char pass[] = "***";
#define DHTPIN 2 // What digital pin we're connected to
// Uncomment whatever type you're using!
#define DHTTYPE DHT11 // DHT 11
DHT dht(DHTPIN, DHTTYPE);
BlynkTimer timer;
// This function sends Arduino's up time every second to Virtual Pin (5)
void sendSensor()
{
 float h = dht.readHumidity();
 float t = dht.readTemperature(); // or dht.readTemperature(true) for Fahrenheit
 if (isnan(h) || isnan(t)) {
 Serial.println("Failed to read from DHT sensor!");
 return;
 }
 // You can send any value at any time.
 // Please don't send more that 10 values per second.
 Blynk.virtualWrite(V5, h);
 Blynk.virtualWrite(V6, t);
}
void setup()
{
 // Debug console
 Serial.begin(9600);
 dht.begin();
 // Setup a function to be called every second
 timer.setInterval(1000L, sendSensor);
}
void loop()
{
 Blynk.run();
 timer.run();
}

When I run this, it gets uploaded with no error, but Blynk shows that the device is offline and this is shown in the serial monitor of Arduino IDE:

15:38:20.658 -> ELF file SHA256: 4b7072eae
15:38:20.699 -> 
15:38:20.735 -> Rebooting...
15:38:20.735 -> �[5001] Connecting to 0.0.0.0
15:38:26.059 -> 
15:38:26.092 -> assert failed: xQueueSemaphoreTake queue.c:1709 (( pxQueue ))
15:38:26.181 -> 
15:38:26.181 -> 
15:38:26.181 -> Backtrace: (some lot of characters)
15:38:26.512 -> 
15:38:26.512 -> 
15:38:26.545 -> 
15:38:26.545 -> 
15:38:26.545 -> ELF file SHA256: 4b7072eae
15:38:26.578 -> 
15:38:26.578 -> Rebooting...
15:38:26.614 -> ��[5001] Connecting to 0.0.0.0
15:38:35.107 -> 
15:38:35.140 -> assert failed: xQueueSemaphoreTake queue.c:1709 (( pxQueue ))
15:38:35.206 -> 
15:38:35.206 -> 
15:38:35.206 -> Backtrace: (some lot of characters)
15:38:35.590 -> 
15:38:35.590 -> 
15:38:35.590 -> 
15:38:35.590 -> 
15:38:35.626 -> ELF file SHA256: 4b7072eae
15:38:35.626 -> 
15:38:35.626 -> Rebooting...
15:38:35.668 -> �

Please help