I am experiencing a problem when programming Arduino Micro in OSX Mavericks. I have tried to reproduce this problem in XCode and Arduino IDE and it is persistent. I need to make a hard-reset at the same time as a click the "program" button.
I have tried to use the new Leonardo bootloader to see if it solves my issue, but its still persistent.
I am running avrdude 6.1, what is the problem?
Stacktrace:
---- Size ----
Binary sketch size: 24162 bytes (of a 28672 byte maximum)
Estimated SRAM used: 733 bytes (of a 2560 byte maximum)
Elapsed time: 5.2 s
---- Reset ----
screen -X kill
No screen session found.
make: [reset] Error 1 (ignored)
sleep 1
9.2-RESET: < micro ./ ./
stty -f /dev/tty.usbmodem1411 1200
---- Upload ----
10.6-UPLOAD: < micro ./
/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -patmega32u4 -C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -D -cavr109 -b57600 -P/dev/tty.usbmodem1411 -Uflash:w:Builds/embeddedcomputing.hex:i
Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding
I am experiencing a problem when programming Arduino Micro in OSX Mavericks. I have tried to reproduce this problem in XCode and Arduino IDE and it is persistent. I need to make a hard-reset at the same time as a click the "program" button.
I am running avrdude 6.1, what is the problem?
Stacktrace:
---- Size ----
Binary sketch size: 24162 bytes (of a 28672 byte maximum)
Estimated SRAM used: 733 bytes (of a 2560 byte maximum)
Elapsed time: 5.2 s
---- Reset ----
screen -X kill
No screen session found.
make: [reset] Error 1 (ignored)
sleep 1
9.2-RESET: < micro ./ ./
stty -f /dev/tty.usbmodem1411 1200
---- Upload ----
10.6-UPLOAD: < micro ./
/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -patmega32u4 -C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -D -cavr109 -b57600 -P/dev/tty.usbmodem1411 -Uflash:w:Builds/embeddedcomputing.hex:i
Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding
I am experiencing a problem when programming Arduino Micro in OSX Mavericks. I have tried to reproduce this problem in XCode and Arduino IDE and it is persistent. I need to make a hard-reset at the same time as a click the "program" button.
I have tried to use the new Leonardo bootloader to see if it solves my issue, but its still persistent.
I am running avrdude 6.1, what is the problem?
Stacktrace:
---- Size ----
Binary sketch size: 24162 bytes (of a 28672 byte maximum)
Estimated SRAM used: 733 bytes (of a 2560 byte maximum)
Elapsed time: 5.2 s
---- Reset ----
screen -X kill
No screen session found.
make: [reset] Error 1 (ignored)
sleep 1
9.2-RESET: < micro ./ ./
stty -f /dev/tty.usbmodem1411 1200
---- Upload ----
10.6-UPLOAD: < micro ./
/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -patmega32u4 -C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -D -cavr109 -b57600 -P/dev/tty.usbmodem1411 -Uflash:w:Builds/embeddedcomputing.hex:i
Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding
Cannot program Arduino Micro in OSX without hard resetting the board every time
I am experiencing a problem when programming Arduino Micro in OSX Mavericks. I have tried to reproduce this problem in XCode and Arduino IDE and it is persistent. I need to make a hard-reset at the same time as a click the "program" button.
I am running avrdude 6.1, what is the problem?
Stacktrace:
---- Size ----
Binary sketch size: 24162 bytes (of a 28672 byte maximum)
Estimated SRAM used: 733 bytes (of a 2560 byte maximum)
Elapsed time: 5.2 s
---- Reset ----
screen -X kill
No screen session found.
make: [reset] Error 1 (ignored)
sleep 1
9.2-RESET: < micro ./ ./
stty -f /dev/tty.usbmodem1411 1200
---- Upload ----
10.6-UPLOAD: < micro ./
/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude -patmega32u4 -C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf -D -cavr109 -b57600 -P/dev/tty.usbmodem1411 -Uflash:w:Builds/embeddedcomputing.hex:i
Connecting to programmer: .avrdude: butterfly_recv(): programmer is not responding