Edit - Arduino Stack Exchange

You are not logged in. Your edit will be placed in a queue until it is peer reviewed.

We welcome edits that make the post easier to understand and more valuable for readers. Because community members review edits, please try to make the post substantially better than how you found it, for example, by fixing grammar or adding additional resources and hyperlinks.

Required fields*

Rev

Title*

Body*

I am using voice command to start/stop display of LDR readings over Arduino. The module I am using is voice module V3. I have downloaded some of its examples. First we need to train the module with specific commands. I have trained it as "on" and "off". Hence I could turn on and off the led using voice command .
code:

 #include <SoftwareSerial.h>
 #include "VoiceRecognitionV3.h"
 
 /** 
 Connection
 Arduino VoiceRecognitionModule
 2 -------> TX
 3 -------> RX
 */
 VR myVR(2,3); // 2:RX 3:TX, you can choose your favourite pins.
 
 uint8_t records[7]; // save record
 uint8_t buf[64];
 int led = 13;
 
 #define onRecord (0)
 #define offRecord (1) 
 
 /**
 @brief Print signature, if the character is invisible, 
 print hexible value instead.
 @param buf --> command length
 len --> number of parameters
 */
 void printSignature(uint8_t *buf, int len) {
 int i;
 for(i=0; i<len; i++) {
 if(buf[i]>0x19 && buf[i]<0x7F){
 Serial.write(buf[i]);
 } else {
 Serial.print("[");
 Serial.print(buf[i], HEX);
 Serial.print("]");
 }
 }
 }
 
 /**
 @brief Print signature, if the character is invisible, 
 print hexible value instead.
 @param buf --> VR module return value when voice is recognized.
 buf[0] --> Group mode(FF: None Group, 0x8n: User, 0x0n:System
 buf[1] --> number of record which is recognized. 
 buf[2] --> Recognizer index(position) value of the recognized record.
 buf[3] --> Signature length
 buf[4]~buf[n] --> Signature
 */
 void printVR(uint8_t *buf) {
 Serial.println("VR Index\tGroup\tRecordNum\tSignature");
 Serial.print(buf[2], DEC);
 Serial.print("\t\t");
 if(buf[0] == 0xFF) {
 Serial.print("NONE");
 } else if(buf[0]&0x80) {
 Serial.print("UG ");
 Serial.print(buf[0]&(~0x80), DEC);
 } else {
 Serial.print("SG ");
 Serial.print(buf[0], DEC);
 }
 Serial.print("\t");
 Serial.print(buf[1], DEC);
 Serial.print("\t\t");
 if(buf[3]>0){
 printSignature(buf+4, buf[3]);
 } else {
 Serial.print("NONE");
 }
 Serial.println("\r\n");
 }
 
 void setup() {
 /** initialize */
 myVR.begin(9600);
 Serial.begin(115200);
 Serial.println("Elechouse Voice Recognition V3 Module\r\nControl LED sample");
 pinMode(led, OUTPUT);
 if(myVR.clear() == 0) {
 Serial.println("Recognizer cleared.");
 } else {
 Serial.println("Not find VoiceRecognitionModule.");
 Serial.println("Please check connection and restart Arduino.");
 while(1);
 }
 if(myVR.load((uint8_t)onRecord) >= 0){
 Serial.println("onRecord loaded");
 }
 if(myVR.load((uint8_t)offRecord) >= 0){
 Serial.println("offRecord loaded");
 }
 }
 
 void loop() {
 int ret;
 ret = myVR.recognize(buf, 50);
 if(ret>0) {
 switch(buf[1]) {
 case onRecord:
 /** turn on LED */
 digitalWrite(led, HIGH);
 break;
 case offRecord:
 /** turn off LED*/
 digitalWrite(led, LOW);
 break;
 default:
 Serial.println("Record function undefined");
 break;
 }
 /** voice recognized */
 printVR(buf);
 }
 }

The code is running fine. Now to start/stop display on OLED I have included all the necessary OLEd libraries and all and changed the above code only in the switch case as:

 void loop() {
 int ret;
 ret = myVR.recognize(buf, 50);
 if(ret>0) {
 switch(buf[1]) {
 case OnRecord:
 display.clearDisplay();
 sensorValue = analogRead(sensorPin);
 display.setCursor(30,0);
 display.setTextSize(1);
 display.print("LDR Reading:");
 display.setCursor(30,10);
 display.setTextSize(2);
 display.print(sensorValue);
 delay(500);
 break;
 case OffRecord:
 display.clearDisplay();
 break;
 default:
 Serial.println("Record function undefined");
 break;
 }
 display.display();
 printVR(buf);
 }
 }

Here when I say "on" the OLEd is starting on my voice command. But it remains frozen in the first reading. When I say "off" it turns of the display(as required). The process runs in loop.

I just want to keep on displaying LDR values by running all the statements in "case Onrecord" until case "offrecord" is encountered. Any idea how to do this?

The entire code for the voice controlled LDR readings on OLED is:

 #include <SoftwareSerial.h>
 #include "VoiceRecognitionV3.h"
 #include <SPI.h>
 #include <Wire.h>
 #include <Adafruit_GFX.h>
 #include <Adafruit_SSD1306.h>
 int sensorPin = A0; // select the input pin for ldr
 int sensorValue = 0;

 #define OLED_RESET 4
 Adafruit_SSD1306 display(OLED_RESET);
 
 char inChar;
 String string;
 /** 
 Connection
 Arduino VoiceRecognitionModule
 2 -------> TX
 3 -------> RX
 */
 VR myVR(2,3); // 2:RX 3:TX, you can choose your favourite pins.
 uint8_t records[7]; // save record
 uint8_t buf[64];

 #define OnRecord (0)
 #define OffRecord (1) 
 
 /**
 @brief Print signature, if the character is invisible, 
 print hexable value instead.
 @param buf --> command length
 len --> number of parameters
 */
 void printSignature(uint8_t *buf, int len) {
 int i;
 for(i=0; i<len; i++) {
 if(buf[i]>0x19 && buf[i]<0x7F) {
 Serial.write(buf[i]);
 } else {
 Serial.print("[");
 Serial.print(buf[i], HEX);
 Serial.print("]");
 }
 }
 }
 
 /**
 @brief Print signature, if the character is invisible, 
 print hexible value instead.
 @param buf --> VR module return value when voice is recognized.
 buf[0] --> Group mode(FF: None Group, 0x8n: User, 0x0n:System
 buf[1] --> number of record which is recognized. 
 buf[2] --> Recognizer index(position) value of the recognized record.
 buf[3] --> Signature length
 buf[4]~buf[n] --> Signature
 */
 void printVR(uint8_t *buf) {
 Serial.println("VR Index\tGroup\tRecordNum\tSignature");
 Serial.print(buf[2], DEC);
 Serial.print("\t\t");
 if(buf[0] == 0xFF) {
 Serial.print("NONE");
 } else if(buf[0]&0x80) {
 Serial.print("UG ");
 Serial.print(buf[0]&(~0x80), DEC);
 } else {
 Serial.print("SG ");
 Serial.print(buf[0], DEC);
 }
 Serial.print("\t");
 
 Serial.print(buf[1], DEC);
 Serial.print("\t\t");
 if(buf[3]>0) {
 printSignature(buf+4, buf[3]);
 }
 else{
 Serial.print("NONE");
 }
 Serial.println("\r\n");
 }
 
 void setup() {
 /** initialize */
 myVR.begin(9600);
 pinMode(13, OUTPUT);
 // initialize with the I2C addr 0x3C / mit I2C-Adresse 0x3c initialisieren
 display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
 display.display();
 display.clearDisplay();
 display.setTextColor(INVERSE); 
 Serial.begin(115200);
 Serial.println("Elechouse Voice Recognition V3 Module\r\nControl LED sample");
 pinMode(sensorPin, INPUT);
 if(myVR.clear() == 0) {
 Serial.println("Recognizer cleared.");
 } else {
 Serial.println("Not find VoiceRecognitionModule.");
 Serial.println("Please check connection and restart Arduino.");
 while(1);
 }
 if(myVR.load((uint8_t)OnRecord) >= 0) {
 Serial.println("startRecord loaded");
 }
 if(myVR.load((uint8_t)OffRecord) >= 0) {
 Serial.println("endRecord loaded");
 }
 }
 
 void loop() {
 int ret;
 ret = myVR.recognize(buf, 50);
 if(ret>0) {
 switch(buf[1]) {
 case OnRecord:
 display.clearDisplay();
 sensorValue = analogRead(sensorPin);
 display.setCursor(30,0);
 display.setTextSize(1);
 display.print("LDR Reading:");
 display.setCursor(30,10);
 display.setTextSize(2);
 display.print(sensorValue);
 delay(500);
 break;
 case OffRecord:
 display.clearDisplay();
 break;
 default:
 Serial.println("Record function undefined");
 break;
 }
 display.display();
 printVR(buf);
 }
 }

I am able to control the display of LDR readings on OLED using pushbutton. Initially it will be in "off" mode. Once I push the button it starts displaying LDr values in the interval of 500 milli seconds. Once I press the button again, It will clear the display.This will run in a loop.

 #include <SPI.h>
 #include <Wire.h>
 #include <Adafruit_GFX.h>
 #include <Adafruit_SSD1306.h>
 int sensorPin = A0; // select the input pin for ldr
 int sensorValue = 0;
 bool toggle = false;
 int buttonpin;
 
 
 #define OLED_RESET 4 // not used / nicht genutzt bei diesem Display
 Adafruit_SSD1306 display(OLED_RESET);
 
 char inChar;
 String string;
 
 
 void setup() { 
 
 pinMode(13, OUTPUT);
 
 buttonpin = 2; 
 pinMode(buttonpin, INPUT_PULLUP);
 // initialize with the I2C addr 0x3C / mit I2C-Adresse 0x3c initialisieren
 display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
 
 Serial.begin(9600);
 display.display();
 delay(2000);
 display.clearDisplay();
 
 display.setTextColor(INVERSE); 
 }
 
 void loop()
 {
 if (digitalRead(buttonpin) == HIGH)
 {
 toggle = !toggle;
 while(digitalRead(buttonpin) == HIGH);
 }
 switch( toggle )
 {
 
 case 1:
 display.clearDisplay();
 sensorValue = analogRead(sensorPin);
 Serial.println(sensorValue); 
 display.setCursor(30,0); 
 display.setTextSize(1);
 display.print("LDR Reading:");
 display.setCursor(30,10); 
 display.setTextSize(2);
 display.print(sensorValue);
 delay(500); 
 
 break;
 
 case 0:
 display.clearDisplay(); 
 
 break;
 }
 display.display();
 
 
 
 }

If you could suggest how I should merge my previous code and the above code so that I could control the display using voice commands, It'll be great!!.


Thanks in advance!

Draft saved

Draft discarded