I wrote two read/write functions if the value you want to write on EEPROM is negative because temperature has negative values too. Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell.
I wrote two read/write functions if the value you want to write on EEPROM is negative because temperature has negative values too. Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell.
I wrote two read/write functions if the value you want to write on EEPROM is negative because temperature has negative values too. Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell.
You can use EEPROM.update(address, value) instead of EEPROM.write(address, value) so the value is written only if differs from the one already saved at the same address.
I wrote two read/write functions if the value you want to write on EEPROM is negative because temperature has negative values too. Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell
I wrote two read/write functions if the value you want to write on EEPROM is negative because temperature has negative values too. Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell.
You can use EEPROM.update(address, value) instead of EEPROM.write(address, value) so the value is written only if differs from the one already saved at the same address.
The microcontroller on the Arduino MEGA boards have 1024 bytes of EEPROM: memory whose values are kept when the board is turned off (like a tiny hard drive). These values will stay in the EEPROM when the board is turned off and may be retrieved later by another sketch.
I wrote two functionread/write functions if the value you want to write on EEPROM is negative because temperature has negative values too.
Note: EEPROM Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell
I wrote two function if the value you want to write on EEPROM is negative.
Note: EEPROM has a lifetime 100,000 write cycle/ cell
The microcontroller on the Arduino MEGA boards have 1024 bytes of EEPROM: memory whose values are kept when the board is turned off (like a tiny hard drive). These values will stay in the EEPROM when the board is turned off and may be retrieved later by another sketch.
I wrote two read/write functions if the value you want to write on EEPROM is negative because temperature has negative values too. Arduino EERROM write word with values between 0-255, also, has a lifetime 100,000 write cycle/ cell