I have an issue with an Arduino Nano.

I want to communicate with it through the Serial-Port. Meaning I want to send and receive Serial commands. With USB and the "Serial Monitor" this works nice. Now I have connected the COM-Port of the PC with Adruinos Digital Pins 0 and 1 (RX and TX) and a GND PIN. (3 Cables total).

Here is a minimal example of my Code:

void setup() {
 Serial.begin(9600,SERIAL_8N1);
 Serial.println("Start");
}
void loop() {
 Serial.println("Hello World");
 delay( 1000 );
}

The Serial Monitor says:

Start
Hello World
Hello World
Hello World
Hello World
...

Putty however says:

▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒::
 ▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒ ▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*

Putty is connected with

• BaudRate: 9600
• Data Bits:
• Stop Bits: 1
• Parity: None
• Flow Control: None

What is wrong here?

I have an issue with an Arduino Nano.

I want to communicate with it through the Serial-Port. Meaning I want to send and receive Serial commands. With USB and the "Serial Monitor" this works nice. Now I have connected the COM-Port of the PC with Adruinos Digital Pins 0 and 1 (RX and TX) and a GND PIN. (3 Cables total).

Here is a minimal example of my Code:

void setup() {
 Serial.begin(9600,SERIAL_8N1);
 Serial.println("Start");
}
void loop() {
 Serial.println("Hello World");
 delay( 1000 );
}

The Serial Monitor says:

Start
Hello World
Hello World
Hello World
Hello World
...

Putty however says:

▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒::
 ▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*▒▒ ▒R▒▒▒t▒*▒▒▒R▒▒▒t▒*

Putty is connected with

• BaudRate: 9600
• Data Bits:
• Stop Bits: 1
• Parity: None
• Flow Control: None

What is wrong here?

Update: The PC has a 9-pin D socket (Image ) This is connected to a RS232 to RJ45 connector (image ) From the RJ45-Cable I used the Brown, Blue, and White/Green Cable to connect with the Arduino