URL: https://linuxfr.org/forums/linux-noyau/posts/lfs-probleme-reseau Title: LFS : Problème réseau Authors: camalot Date: 2014年03月07日T21:02:39+01:00 License: CC By-SA Tags: lfs Score: 1 Hello! Je viens de terminer mon système LFS 7.4 et je teste donc un peu tout. J'ai un problème avec le net que je n'arrive pas à résoudre. Au début, j'avais droit au "cannot find eth0" J'ai recompilé un noyau avec plus de drivers, j'ai une carte ethernet realtek RTL8191SE-VA. J'ai pas trouvé exactement le driver dans la config noyau, alors j'ai un peu tout coché de realtek. Au final, je n'ai plus cette erreur mais, avant de me loger j'ai : Adding IPv4 adresse ip to the eth0 interface.. OK [] r8169 .&checktime(0000,03,00,':').0 eth0: link down [] r8169 .&checktime(0000,03,00,':').0 eth0: link down [] IPv6 ADDRCONF(NETDEV_UP): eth0 : link is not ready [] r8169 .&checktime(0000,03,00,':').0 eth0: link up [] IPv6 ADDRCONF(NETDEV_UP): eth0 : link becomes ready Quand je tente un ping sur google : ping 173.194.40.152, j'obtiens ça : PING 173.194.40.152 (173.194.40.152): 48 data bytes 60 bytes from 192.168.0.17: Destination Host Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data 4 5 00 4c00 0000 0 0040 40 01 9da3 192.168.0.17 173.194.40.152 60 bytes from 192.168.0.17: Destination Host Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data 4 5 00 4c00 0000 0 0040 40 01 9da3 192.168.0.17 173.194.40.152 60 bytes from 192.168.0.17: Destination Host Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data 4 5 00 4c00 0000 0 0040 40 01 9da3 192.168.0.17 173.194.40.152 60 bytes from 192.168.0.17: Destination Host Unreachable Vr HL TOS Len ID Flg off TTL Pro cks Src Dst Data 4 5 00 4c00 0000 0 0040 40 01 9da3 192.168.0.17 173.194.40.152 --- 173.194.40.152 ping statistics --- 4 packets transmitted, 0 packets received, 100% packet loss Mon fichier ifconfig.eth0 : #cat /etc/sysconfig/ifconfig.eth0 ONBOOT=yes IFACE=eth0 SERVICE=ipv4-static IP=192.168.0.17 GATEWAY=192.168.0.1 PREFIX=24 BROADCAST=192.168.0.255 Sachant que l'ip est celle utilisée sur le système hote... Et c'est théoriquement la bonne, je vois bien le pc allumé sur l'interface de la freebox. J'imagine que c'est une erreur de config du fichier, mais j'ai essayé diverses choses, cela ne s'arrange pas... Quelqu'un a une idée ? Merci :)