URL: https://linuxfr.org/forums/linux-mandriva/posts/probleme-de-resolution--3 Title: problème de résolution Authors: fearan Date: 2009年07月03日T09:03:21+02:00 Tags: Score: 0 Bonjour la foule, une fois n'est pas coutume, c'est moi qui pose une question ici :D Récemment j'ai mis à jour mon portable de mandriva 2009.0 -> 2009.1 C'est un acer Aspire 3023 Globalement tout s'est bien passé sauf l'affichage. J'ai du passer du driver propriétaire fgrlx vers radeon (radeonhd me donne les même soucis) la carte graphique une radeon X700 n'est plus géré par flgrx. Et la c'est le drame, d'une belle résolution (nan pas celle de l'an 2000) de 1280x800 (écran wide) Je suis passé à 1024x768 ce qui me laisse des marges atroces sur les cotés. J'ai un peut tout essayé et je n'arrive pas à lui forcer la main voila mon log (II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 50000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 358.000000, mclk: 330.000000 (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=50000; xclk=40000 (WW) RADEON(0): LVDS Info: XRes: 1024, YRes: 768, DotClock: 65000 HBlank: 320, HOverPlus: 24, HSyncWidth: 136 VBlank: 38, VOverPlus: 3, VSyncWidth: 6 (II) RADEON(0): Skipping TV-Out (II) RADEON(0): TMDS PLL from BIOS: 16500 b0112 encoder: 0x4 encoder: 0x1 encoder: 0x2 (II) RADEON(0): Output VGA-0 using monitor section monitor1 (II) RADEON(0): I2C bus "VGA-0" initialized. (II) RADEON(0): Output LVDS has no monitor section (II) RADEON(0): I2C bus "LVDS" initialized. (II) RADEON(0): Output DVI-0 has no monitor section (II) RADEON(0): I2C bus "DVI-0" initialized. (II) RADEON(0): Port0: £spaces£ £/spaces£XRANDR name: VGA-0 £spaces£ £/spaces£Connector: VGA £spaces£ £/spaces£CRT1: INTERNAL_DAC1 £spaces£ £/spaces£DDC reg: 0x60 (II) RADEON(0): Port1: £spaces£ £/spaces£XRANDR name: LVDS £spaces£ £/spaces£Connector: LVDS £spaces£ £/spaces£LCD1: INTERNAL_LVDS £spaces£ £/spaces£DDC reg: 0x68 (II) RADEON(0): Port2: £spaces£ £/spaces£XRANDR name: DVI-0 £spaces£ £/spaces£Connector: DVI-D £spaces£ £/spaces£DFP1: INTERNAL_TMDS1 £spaces£ £/spaces£DDC reg: 0x64 Atom Get EDID success (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 Dac detection success finished output detect: 0 (II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60. (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0. (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0 finished output detect: 1 (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60. (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0. (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0 finished output detect: 2 finished all detect before xf86InitialConfiguration Atom Get EDID success (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0 Dac detection success (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0 (II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed (II) RADEON(0): Added native panel mode: 1024x768 (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0 (II) RADEON(0): Output VGA-0 disconnected (II) RADEON(0): Output LVDS connected (II) RADEON(0): Output DVI-0 disconnected (II) RADEON(0): Using exact sizes for initial modes (II) RADEON(0): Output LVDS using initial mode 1024x768 after xf86InitialConfiguration (==) RADEON(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" £spaces£ £/spaces£compiled for 1.6.1, module version = 1.0.0 £spaces£ £/spaces£ABI class: X.Org ANSI C Emulation, version 0.4 (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) RADEON(0): Using EXA acceleration architecture (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" £spaces£ £/spaces£compiled for 1.6.1, module version = 2.4.0 £spaces£ £/spaces£ABI class: X.Org Video Driver, version 5.0 (==) RADEON(0): Assuming overlay scaler buffer width is 1536 (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable. (!!) RADEON(0): For information on using the multimedia capabilities £spaces£ £/spaces£of this adapter, please see [http://gatos.sf.net.](http://gatos.sf.net.) (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support [...] j'ai bien essayé avec xrandr de forcer les mode (lui ajouter les mode qui vont bien mais il refuse) voila mon xorg.conf (en partie) Section "Monitor" £spaces£ £/spaces£Identifier "monitor1" £spaces£ £/spaces£VendorName "Generic" £spaces£ £/spaces£ModelName "Flat Panel 1280x800" £spaces£ £/spaces£HorizSync 31.5-50.0 £spaces£ £/spaces£VertRefresh 56.0-65.0 £spaces£ £/spaces£# modeline generated by gtf(1) [handled by XFdrake] £spaces£ £/spaces£ModeLine "1280x800_120" 181.21 1280 1376 1520 1760 800 801 804 858 -HSync +Vsync £spaces£ £/spaces£# modeline generated by gtf(1) [handled by XFdrake] £spaces£ £/spaces£ModeLine "1280x800_100" 147.89 1280 1376 1512 1744 800 801 804 848 -HSync +Vsync £spaces£ £/spaces£# modeline generated by gtf(1) [handled by XFdrake] £spaces£ £/spaces£ModeLine "1280x800_85" 123.38 1280 1368 1504 1728 800 801 804 840 -HSync +Vsync £spaces£ £/spaces£# modeline generated by gtf(1) [handled by XFdrake] £spaces£ £/spaces£ModeLine "1280x800_75" 107.21 1280 1360 1496 1712 800 801 804 835 -HSync +Vsync £spaces£ £/spaces£# modeline generated by gtf(1) [handled by XFdrake] £spaces£ £/spaces£ModeLine "1280x800_60" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync £spaces£ £/spaces£# modeline generated by gtf(1) [handled by XFdrake] £spaces£ £/spaces£ModeLine "1280x800_50" 68.56 1280 1336 1472 1664 800 801 804 824 -HSync +Vsync EndSection Section "Device" £spaces£ £/spaces£Identifier "device1" £spaces£ £/spaces£VendorName "ATI Technologies Inc" £spaces£ £/spaces£BoardName "ATI Radeon X1950 and earlier" £spaces£ £/spaces£Driver "radeon" £spaces£ £/spaces£Option "DPMS" £spaces£ £/spaces£Option "AccelMethod" "EXA" # Option "BIOSHotkeys" # Option "MergedDPI" "false" # Option "IgnoreEDID" "false" # Option "DDCMode" "false" £spaces£ £/spaces£Option "R4xxATOM" "true" £spaces£ £/spaces£Option "PannelSize" "1280x800" £spaces£ £/spaces£Option "Monitor" "LVDS, AUTO" EndSection Section "Screen" £spaces£ £/spaces£Identifier "screen1" £spaces£ £/spaces£Device "device1" £spaces£ £/spaces£Monitor "monitor1" £spaces£ £/spaces£DefaultColorDepth 24 £spaces£ £/spaces£Subsection "Display" £spaces£ £/spaces£Depth 8 £spaces£ £/spaces£Modes "1280x800" £spaces£ £/spaces£EndSubsection £spaces£ £/spaces£Subsection "Display" £spaces£ £/spaces£Depth 15 £spaces£ £/spaces£Modes "1280x800" £spaces£ £/spaces£EndSubsection £spaces£ £/spaces£Subsection "Display" £spaces£ £/spaces£Depth 16 £spaces£ £/spaces£Modes "1280x800" £spaces£ £/spaces£EndSubsection £spaces£ £/spaces£Subsection "Display" £spaces£ £/spaces£Depth 24 £spaces£ £/spaces£Modes "1280x800" £spaces£ £/spaces£EndSubsection EndSection Voila, je crois que c'est à peu près tout ah si la version d'xorg X.Org X Server 1.6.1 Release Date: 2009年4月14日

AltStyle によって変換されたページ (->オリジナル) /