URL: https://linuxfr.org/forums/linux-mandriva/posts/mandriva-le2005-probl%C3%A8me-de-boot Title: Mandriva LE2005 : problème de boot Authors: c_gen Date: 2005年07月23日T15:17:56+02:00 Tags: Score: 0 Bonjour à tous. Je viens d'installer la distribution Linux Mandriva LE 2005. L'installation s'est bien passée, mais Linux ne démarre pas: Je m'explique: J'allume l'ordinateur, là j'obtiens l'interface graphique de Lilo. Je lui demande de booter sous Linux. C'est là que ça se gâte: j'obtient la jolie tête du pingouin Mandriva, et la barre de progression n'avance pas. Idem en choisissant FailSafe. Je relance alors le DVD et j'entre lors l'invite boot : rescue. Là j'arrive à lancer un shell, à monter une bonne vielle disquette £spaces£ £/spaces3ドルp1/4 et taper la un dmesg avec une redirection vers /mnt/floppy. (au fait existe-il un moyen d'ecrire sur un systeme de fichier NT à partir de Linux ?) Voici le resultat de dmesg. Pardonnez moi car il est un peu long ! Pouvez-vous m'aider pour que Linux boot enfin ? Comment décrypter la sortie de dmesg ? Merci d'avance de votre aide. A bientôt Chris. Linux version 2.6.11-6mdk-i586-up-1GB (gb@n2.mandrakesoft.com) (gcc version 3.4.3 (Mandrakelinux 10.2 3.4.3-3mdk)) #1 Tue Mar 22 15:46:07 CET 2005 BIOS-provided physical RAM map: £spaces£ £/spaces£BIOS-e820: 0000000000000000 - 000000000009f400 (usable) £spaces£ £/spaces£BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) £spaces£ £/spaces£BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved) £spaces£ £/spaces£BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) £spaces£ £/spaces£BIOS-e820: 0000000000100000 - 000000000fef0000 (usable) £spaces£ £/spaces£BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI data) £spaces£ £/spaces£BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS) £spaces£ £/spaces£BIOS-e820: 000000000ff00000 - 000000000ff80000 (usable) £spaces£ £/spaces£BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved) £spaces£ £/spaces£BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) £spaces£ £/spaces£BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) £spaces£ £/spaces£BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65408 £spaces£ £/spaces£DMA zone: 4096 pages, LIFO batch:1 £spaces£ £/spaces£Normal zone: 61312 pages, LIFO batch:14 £spaces£ £/spaces£HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f82e0 ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x0fefc11b ACPI: FADT (v001 FSC D1675 0x06040001 0x000f4240) @ 0x0fefc14b ACPI: MADT (v001 FSC APIC 0x06040001 CSF 0x00000000) @ 0x0fefef92 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x0fefefd8 ACPI: DSDT (v001 FSC D1675 0x06040001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000) Built 1 zonelists Found and enabled local APIC! mapped APIC to ffffd000 (fee00000) Initializing CPU#0 Kernel command line: initrd=alt0/all.rdz ramdisk_size=128000 automatic=method:cdrom acpi=ht rescue BOOT_IMAGE=alt0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 2523.389 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 250904k/261632k available (2074k kernel code, 9964k reserved, 687k data, 240k init, 0k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4997.12 BogoMIPS (lpj=2498560) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 2.50GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4101k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd99d, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Uncovering SIS963 that hid as a SIS503 (compatible=1) Enabling SiS 96x SMBus. PCI: Ignoring BAR0-3 of IDE controller .&checktime(0000,00,02,':').5 PCI: Using IRQ router SIS [1039/0963] at .&checktime(0000,00,02,':').0 PCI: IRQ 0 for device .&checktime(0000,00,02,':').1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device .&checktime(0000,00,02,':').1 PCI: Sharing IRQ 11 with .&checktime(0000,00,02,':').3 PCI: IRQ 0 for device .&checktime(0000,00,02,':').5 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 9 for device .&checktime(0000,00,02,':').5 Simple Boot Flag at 0x69 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1121198695.817:0): initialized inotify device minor=63 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004年01月31日 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize pktcdvd: v0.2.0a 2004年07月14日 Jens Axboe (axboe@suse.de) and petero2@telia.com Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot .&checktime(0000,00,02,':').5 PCI: Found IRQ 9 for device .&checktime(0000,00,02,':').5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller £spaces£ £/spaces£ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio £spaces£ £/spaces£ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA ** C'est à ce niveau qu'il bloque quand je boote avec Lilo. ** Probing IDE interface ide0... hda: WDC WD1200LB-55EDA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ATAPI DVDROM 16X, ATAPI CD/DVD-ROM drive hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported £spaces£ £/spaces£/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found devfs_mk_dev: could not append to parent for md/0 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org> PCI: Found IRQ 11 for device .&checktime(0000,00,02,':').3 PCI: Sharing IRQ 11 with .&checktime(0000,00,02,':').1 ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e4010000-e40107ff] Max Packet=[2048] usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) PCI: Found IRQ 9 for device .&checktime(0000,00,03,':').0 ohci_hcd .&checktime(0000,00,03,':').0: OHCI Host Controller ohci_hcd .&checktime(0000,00,03,':').0: irq 9, pci mem 0xe4011000 ohci_hcd .&checktime(0000,00,03,':').0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 11 for device .&checktime(0000,00,03,':').1 ohci_hcd .&checktime(0000,00,03,':').1: OHCI Host Controller ohci_hcd .&checktime(0000,00,03,':').1: irq 11, pci mem 0xe4012000 ohci_hcd .&checktime(0000,00,03,':').1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 10 for device .&checktime(0000,00,03,':').2 ohci_hcd .&checktime(0000,00,03,':').2: OHCI Host Controller ohci_hcd .&checktime(0000,00,03,':').2: irq 10, pci mem 0xe4013000 ohci_hcd .&checktime(0000,00,03,':').2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 9 for device .&checktime(0000,00,03,':').3 ehci_hcd .&checktime(0000,00,03,':').3: EHCI Host Controller ehci_hcd .&checktime(0000,00,03,':').3: irq 9, pci mem 0xe4014000 ehci_hcd .&checktime(0000,00,03,':').3: new USB bus registered, assigned bus number 4 PCI: cache line size of 128 is not supported by device .&checktime(0000,00,03,':').3 ehci_hcd .&checktime(0000,00,03,':').3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 2-1: new full speed USB device using ohci_hcd and address 2 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0030053100097c20] usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver hdc: ATAPI 32X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A loop: loaded (max 256 devices) gzloop: loaded /sysroot/tmp/rescue.clp: 496 blocks, 65536 bytes/block, largest block is 65562 bytes. ISO 9660 Extensions: RRIP_1991A Freeing unused kernel memory: 240k freed Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET: Registered protocol family 17 SGI XFS with ACLs, large block numbers, no debug enabled SGI XFS Quota Management subsystem SCSI subsystem initialized Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 648 chipset agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xe0000000 i2c-sis96x version 1.0.0 sis96x_smbus .&checktime(0000,00,02,':').1: SiS96x SMBus base address: 0x8100 PCI: Found IRQ 5 for device .&checktime(0000,00,02,':').7 PCI: Sharing IRQ 5 with .&checktime(0000,00,14,':').0 codec_ready: codec is not ready [0x340000] Intel ICH: probe of .&checktime(0000,00,02,':').7 failed with error -5 Linux Tulip driver version 1.1.13 (May 11, 2002) PCI: Found IRQ 11 for device .&checktime(0000,00,06,':').0 tulip0: MII transceiver #1 config 3100 status 7849 advertising 01e1. eth0: ADMtek Comet rev 17 at 00011800, 00:30:05:59:46:EB, IRQ 11. VFS: Can't find ext3 filesystem on dev hda. VFS: Can't find an ext2 filesystem on dev hda. ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda XFS: bad magic number XFS: SB validate failed VFS: Can't find ext3 filesystem on dev hda1. VFS: Can't find an ext2 filesystem on dev hda1. ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda1 XFS: bad magic number XFS: SB validate failed attempt to access beyond end of device hda2: rw=0, want=4, limit=2 EXT3-fs: unable to read superblock attempt to access beyond end of device hda2: rw=0, want=4, limit=2 EXT2-fs: unable to read superblock attempt to access beyond end of device hda2: rw=0, want=18, limit=2 ReiserFS: hda2: warning: sh-2006: read_super_block: bread failed (dev hda2, block 8, size 1024) attempt to access beyond end of device hda2: rw=0, want=130, limit=2 ReiserFS: hda2: warning: sh-2006: read_super_block: bread failed (dev hda2, block 64, size 1024) ReiserFS: hda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda2 attempt to access beyond end of device hda2: rw=0, want=8, limit=2 XFS: SB read failed attempt to access beyond end of device hda2: rw=0, want=72, limit=2 attempt to access beyond end of device hda2: rw=0, want=128, limit=2 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode.

AltStyle によって変換されたページ (->オリジナル) /