URL: https://linuxfr.org/forums/linux-general/posts/toshiba-satellite-p100-197-probl%C3%A8me-de-son Title: Toshiba Satellite P100-197 : problème de son Authors: Syvolc Date: 2006年09月05日T20:18:10+02:00 Tags: debian, ubuntu et selinux Score: 0 Bonjour à tous J'ai acheté un ordinateur portable Toshiba Satellite P100-197. Tout marche "out of the box" avec Ubuntu dapper, sauf le son. On a essayé avec une debian unstable et le noyau 2.6.17, c'est pas mieux. Et après une mise à jour du BIOS, c'est pas mieux non plus. Apparemment le problème n'est pas lié au pilote. Un démarrage du PC avec acpi=off fait fonctionner le son, mais ce n'est pas des plus pratique sur un ordinateur portable. La DSDT n'est pas trop fausse, et la corriger ne change rien (après, faut voir si c'est des bonnes corrections). Comment résoudre ce problème, cher forum ? Merci d'avance Résultats de dmesg : Linux version 2.6.17-2-686 (Debian 2.6.17-8) (waldi@debian.org) (gcc version 4.1.2 20060814 (prerelease) (Debian 4.1.1-11)) #1 SMP Thu Aug 31 12:53:18 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e4000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe90000 (usable) BIOS-e820: 000000003fe90000 - 000000003fe9b000 (ACPI data) BIOS-e820: 000000003fe9b000 - 000000003ff00000 (ACPI NVS) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 1022MB LOWMEM available. found SMP MP-table at 000f76d0 On node 0 totalpages: 261776 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 257680 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 TOSQCI ) @ 0x000f7610 ACPI: RSDT (v001 TOSQCI TOSQCI00 0x06040000 LTP 0x00000000) @ 0x3fe94219 ACPI: FADT (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3fe9ae20 ACPI: MADT (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3fe9ae94 ACPI: HPET (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3fe9aefc ACPI: MCFG (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3fe9af34 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3fe9af70 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fe9afd8 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3fe94259 ACPI: DSDT (v001 TOSQCI Denver 0x06040000 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: 2 duplicate APIC table ignored. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Built 1 zonelists Kernel command line: root=/dev/sda6 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1030676k/1047104k available (1482k kernel code, 15888k reserved, 544k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000 (virtual 0xf0800000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Using HPET for base-timer Using HPET for gettimeofday Detected 1672.205 MHz processor. Using hpet for high-res timesource Calibrating delay using timer specific routine.. 3348.45 BogoMIPS (lpj=6696905) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3344.49 BogoMIPS (lpj=6688990) CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 Total of 2 processors activated (6692.94 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=4000 checking if image is initramfs... it is Freeing initrd memory: 4282k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller .&checktime(0000,00,1,':')f.2 Boot video device is .&checktime(0000,01,00,':').0 PCI: Transparent bridge - .&checktime(0000,00,1,':')e.0 PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 9 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge .&checktime(0000,00,1,':')c.0 PCI: Cannot allocate resource region 8 of bridge .&checktime(0000,00,1,':')c.0 PCI: Cannot allocate resource region 9 of bridge .&checktime(0000,00,1,':')c.0 PCI: Cannot allocate resource region 7 of bridge .&checktime(0000,00,1,':')c.1 PCI: Cannot allocate resource region 8 of bridge .&checktime(0000,00,1,':')c.1 PCI: Cannot allocate resource region 9 of bridge .&checktime(0000,00,1,':')c.1 PCI: Cannot allocate resource region 7 of bridge .&checktime(0000,00,1,':')c.2 PCI: Cannot allocate resource region 8 of bridge .&checktime(0000,00,1,':')c.2 PCI: Cannot allocate resource region 9 of bridge .&checktime(0000,00,1,':')c.2 PCI: Failed to allocate mem resource #6:20000@d0000000 for .&checktime(0000,01,00,':').0 PCI: Bridge: .&checktime(0000,00,01,':').0 IO window: 2000-2fff MEM window: b1000000-b2ffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: .&checktime(0000,00,1,':')c.0 IO window: 3000-3fff MEM window: 52000000-520fffff PREFETCH window: disabled. PCI: Bridge: .&checktime(0000,00,1,':')c.1 IO window: disabled. MEM window: 52100000-521fffff PREFETCH window: disabled. PCI: Bridge: .&checktime(0000,00,1,':')c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 11, cardbus bridge: 0000:0a:04.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: 50000000-51ffffff MEM window: 54000000-55ffffff PCI: Bridge: .&checktime(0000,00,1,':')e.0 IO window: 4000-4fff MEM window: b3200000-b32fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt .&checktime(0000,00,01,':').0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,00,01,':').0 to 64 PCI: Enabling device .&checktime(0000,00,1,':')c.0 (0000 -> 0003) ACPI: PCI Interrupt .&checktime(0000,00,1,':')c.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device .&checktime(0000,00,1,':')c.0 to 64 PCI: Enabling device .&checktime(0000,00,1,':')c.1 (0000 -> 0002) ACPI: PCI Interrupt .&checktime(0000,00,1,':')c.1[B] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,00,1,':')c.1 to 64 ACPI: PCI Interrupt .&checktime(0000,00,1,':')c.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device .&checktime(0000,00,1,':')c.2 to 64 PCI: Enabling device .&checktime(0000,00,1,':')e.0 (0004 -> 0007) PCI: Setting latency timer of device .&checktime(0000,00,1,':')e.0 to 64 PCI: Enabling device 0000:0a:04.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:0a:04.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1157448718.168:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered ACPI: PCI Interrupt .&checktime(0000,00,01,':').0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,00,01,':').0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[.&checktime(0000,00,01,':').0:pcie00] Allocate Port Service[.&checktime(0000,00,01,':').0:pcie03] ACPI: PCI Interrupt .&checktime(0000,00,1,':')c.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device .&checktime(0000,00,1,':')c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[.&checktime(0000,00,1,':')c.0:pcie00] Allocate Port Service[.&checktime(0000,00,1,':')c.0:pcie02] Allocate Port Service[.&checktime(0000,00,1,':')c.0:pcie03] ACPI: PCI Interrupt .&checktime(0000,00,1,':')c.1[B] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,00,1,':')c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[.&checktime(0000,00,1,':')c.1:pcie00] Allocate Port Service[.&checktime(0000,00,1,':')c.1:pcie02] Allocate Port Service[.&checktime(0000,00,1,':')c.1:pcie03] ACPI: PCI Interrupt .&checktime(0000,00,1,':')c.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device .&checktime(0000,00,1,':')c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[.&checktime(0000,00,1,':')c.2:pcie00] Allocate Port Service[.&checktime(0000,00,1,':')c.2:pcie02] Allocate Port Service[.&checktime(0000,00,1,':')c.2:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode ACPI wakeup devices: HDEF LANE PXS2 PXS3 PXS4 PXS5 PXS6 USB1 USB2 USB3 USB4 USB7 LANC ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 196k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: CPU1 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (34 C) Intel(R) PRO/1000 Network Driver - version 7.0.33-k2-NAPI Copyright (c) 1999-2005 Intel Corporation. PCI: Enabling device .&checktime(0000,02,00,':').0 (0000 -> 0003) ACPI: PCI Interrupt .&checktime(0000,02,00,':').0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,02,00,':').0 to 64 ieee1394: Initialized config rom entry `ip1394' usbcore: registered new driver usbfs usbcore: registered new driver hub Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx USB Universal Host Controller Interface driver v3.0 e1000: .&checktime(0000,02,00,':').0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:3e:cd:8b e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection PCI: Enabling device 0000:0a:04.1 (0000 -> 0002) ACPI: PCI Interrupt .&checktime(0000,00,1,':')d.0[A] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device .&checktime(0000,00,1,':')d.0 to 64 uhci_hcd .&checktime(0000,00,1,':')d.0: UHCI Host Controller uhci_hcd .&checktime(0000,00,1,':')d.0: new USB bus registered, assigned bus number 1 uhci_hcd .&checktime(0000,00,1,':')d.0: irq 233, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:0a:04.1 to 64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[b3201000-b32017ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt .&checktime(0000,00,1,':')d.1[B] -> GSI 19 (level, low) -> IRQ 50 PCI: Setting latency timer of device .&checktime(0000,00,1,':')d.1 to 64 uhci_hcd .&checktime(0000,00,1,':')d.1: UHCI Host Controller uhci_hcd .&checktime(0000,00,1,':')d.1: new USB bus registered, assigned bus number 2 uhci_hcd .&checktime(0000,00,1,':')d.1: irq 50, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt .&checktime(0000,00,1,':')d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device .&checktime(0000,00,1,':')d.2 to 64 uhci_hcd .&checktime(0000,00,1,':')d.2: UHCI Host Controller uhci_hcd .&checktime(0000,00,1,':')d.2: new USB bus registered, assigned bus number 3 uhci_hcd .&checktime(0000,00,1,':')d.2: irq 185, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt .&checktime(0000,00,1,':')d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,00,1,':')d.3 to 64 uhci_hcd .&checktime(0000,00,1,':')d.3: UHCI Host Controller uhci_hcd .&checktime(0000,00,1,':')d.3: new USB bus registered, assigned bus number 4 uhci_hcd .&checktime(0000,00,1,':')d.3: irq 169, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt .&checktime(0000,00,1,':')d.7[A] -> GSI 23 (level, low) -> IRQ 233 PCI: Setting latency timer of device .&checktime(0000,00,1,':')d.7 to 64 ehci_hcd .&checktime(0000,00,1,':')d.7: EHCI Host Controller ehci_hcd .&checktime(0000,00,1,':')d.7: new USB bus registered, assigned bus number 5 ehci_hcd .&checktime(0000,00,1,':')d.7: debug port 1 PCI: cache line size of 32 is not supported by device .&checktime(0000,00,1,':')d.7 ehci_hcd .&checktime(0000,00,1,':')d.7: irq 233, io mem 0xb0004000 ehci_hcd .&checktime(0000,00,1,':')d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI subsystem initialized libata version 1.20 loaded. usb 2-1: new low speed USB device using uhci_hcd and address 2 ata_piix .&checktime(0000,00,1,':')f.2: version 1.05 ata_piix .&checktime(0000,00,1,':')f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt .&checktime(0000,00,1,':')f.2[B] -> GSI 19 (level, low) -> IRQ 50 PCI: Setting latency timer of device .&checktime(0000,00,1,':')f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3d09 87:6023 88:203f ata1: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA48 ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: TOSHIBA MK1032GS Rev: AS02 Type: Direct-Access ANSI SCSI revision: 05 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 usb 2-1: new low speed USB device using uhci_hcd and address 3 ata2: dev 0 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Logitech Optical USB Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-.&checktime(0000,00,1,':')d.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: HL-DT-ST Model: DVDRAM GMA-4082N Rev: HV02 Type: CD-ROM ANSI SCSI revision: 05 SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f0000951238] sda1 sda2 sda3 < sda5 sda6 > sda4 sd 0:0:0:0: Attached scsi disk sda Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 agpgart: Detected an Intel 945GM Chipset. agpgart: AGP aperture is 256M @ 0x0 ts: Compaq touchscreen protocol output sdhci: Secure Digital Host Controller Interface driver, 0.11 sdhci: Copyright(c) Pierre Ossman PCI: Enabling device 0000:0a:04.3 (0000 -> 0002) ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:0a:04.3 to 64 mmc0: SDHCI at 0xb3201800 irq 177 DMA eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> IRQ 177 Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31] ACPI: PCI Interrupt .&checktime(0000,00,1,':')b.0[A] -> GSI 22 (level, low) -> IRQ 58 PCI: Setting latency timer of device .&checktime(0000,00,1,':')b.0 to 64 mice: PS/2 mouse device common for all mice Yenta: ISA IRQ mask 0x0cf8, PCI irq 177 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff cs: IO port probe 0x4000-0x4fff: clean. pcmcia: parent PCI bridge Memory window: 0xb3200000 - 0xb32fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff hw_random: RNG not detected Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 synaptics: Toshiba Satellite P100 detected, limiting rate to 40pps. input: SynPS/2 Synaptics TouchPad as /class/input/input2 cs: IO port probe 0x100-0x3af: excluding 0x370-0x377 cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. Adding 1951888k swap on /dev/sda2. Priority:-1 extents:1 across:1951888k EXT3 FS on sda6, internal journal loop: loaded (max 8 devices) ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance device-mapper: 4.6.0-ioctl (2006年02月17日) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0d ipw3945: Copyright(c) 2003-2006 Intel Corporation PCI: Enabling device .&checktime(0000,03,00,':').0 (0000 -> 0002) ACPI: PCI Interrupt .&checktime(0000,03,00,':').0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device .&checktime(0000,03,00,':').0 to 64 ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels) ACPI: Battery Slot [BAT1] (battery present) ACPI: AC Adapter [ACAD] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt .&checktime(0000,01,00,':').0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device .&checktime(0000,01,00,':').0 to 64 NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006 NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_UP): eth2: link is not ready IPv6 over IPv4 tunneling driver NET: Registered protocol family 4 NET: Registered protocol family 3 NET: Registered protocol family 5 ieee80211_crypt: registered algorithm 'WEP' ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready eth2: no IPv6 routers present À noter : **PCI: Cannot allocate resource region 9 of bridge .&checktime(0000,00,1,':')c.2 PCI: Failed to allocate mem resource #6:20000@d0000000 for .&checktime(0000,01,00,':').0** Résultats de lspci : 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce Go 7600] (rev a1) 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) 0a:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 0a:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 0a:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) 0a:04.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

AltStyle によって変換されたページ (->オリジナル) /