URL: https://linuxfr.org/forums/linux-general/posts/mon-lecteur-mp3-ne-fonctionne-plus-bien Title: Mon lecteur mp3 ne fonctionne plus bien Authors: fog2100 Date: 2010年10月18日T02:57:41+02:00 Tags: Score: 0 Bonjour, La connection a mon lecteur mp3 ne fonctionne plus bien. Il s'agit d'un SANSA CLIP. Je l'ai finalement reformatté, mais il ne démarre pas à la connexion. dmesg | tail -50 manuel@ubuntu:~$ sudo mount /dev/usbmon2 /mnt/SANSA/ mount : /dev/usbmon2 n'est pas un périphérique de type bloc manuel@ubuntu:~$ sudo mount /dev/sd /mnt/SANSA/ sda sda1 sda2 sda5 sdb sdc sdc1 sdc2 manuel@ubuntu:~$ sudo mount /dev/scd0 /mnt/SANSA/ scd0 manuel@ubuntu:~$ sudo mount /dev/scd0 /mnt/SANSA/ mount : /dev/sr0 : périphérique inconnnu manuel@ubuntu:~$ dmesg | tail -15 [50803.152533] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50803.964039] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50810.476040] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50811.000049] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50811.896058] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50812.341730] scsi 9:0:0:0: Device offlined - not ready after error recovery [51414.253794] sd 6:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB) [51414.254536] sd 6:0:0:0: [sdb] Assuming drive cache: write through [51414.256284] sd 6:0:0:0: [sdb] Assuming drive cache: write through [51414.256293] sdb: sdb1 [51418.644562] Skipping EDID probe due to cached edid [51985.737638] usb 2-1: USB disconnect, address 9 [51997.604332] hub 2-0:1.0: unable to enumerate USB device on port 1 [51999.524043] usb 2-1: new high speed USB device using ehci_hcd and address 11 [51999.662074] scsi10 : usb-storage 2-1:1.0 manuel@ubuntu:~$ sudo mount /dev/sdb1 /mnt/SANSA/ mount : le périphérique spécial /dev/sdb1 n'existe pas manuel@ubuntu:~$ dmesg | tail -50 [45594.876546] Skipping EDID probe due to cached edid [49723.352066] Skipping EDID probe due to cached edid [50664.088571] usb 6-1: USB disconnect, address 2 [50700.268537] hub 2-0:1.0: unable to enumerate USB device on port 1 [50701.924037] usb 2-1: new high speed USB device using ehci_hcd and address 6 [50702.060250] scsi8 : usb-storage 2-1:1.0 [50703.064732] scsi 8:0:0:0: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 [50703.065402] scsi 8:0:0:1: Direct-Access SanDisk Sansa Clip+ 4GB v01. PQ: 0 ANSI: 0 [50703.066026] sd 8:0:0:0: Attached scsi generic sg4 type 0 [50703.066247] sd 8:0:0:1: Attached scsi generic sg5 type 0 [50703.089160] sd 8:0:0:0: [sdd] 7683072 512-byte logical blocks: (3.93 GB/3.66 GiB) [50703.089863] sd 8:0:0:0: [sdd] Write Protect is off [50703.089869] sd 8:0:0:0: [sdd] Mode Sense: 04 00 00 00 [50703.089873] sd 8:0:0:0: [sdd] Assuming drive cache: write through [50703.093994] sd 8:0:0:1: [sde] Attached SCSI removable disk [50703.095483] sd 8:0:0:0: [sdd] Assuming drive cache: write through [50703.095496] sdd: [50703.103927] sd 8:0:0:0: [sdd] Assuming drive cache: write through [50703.103935] sd 8:0:0:0: [sdd] Attached SCSI removable disk [50721.953281] usb 2-1: USB disconnect, address 6 [50724.352554] usb 6-1: new low speed USB device using uhci_hcd and address 3 [50724.663801] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input14 [50724.663940] generic-usb 0003:04D9:1603.0004: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-.&checktime(0000,00,1,':')d.0-1/input0 [50724.756230] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/input/input15 [50724.756376] generic-usb 0003:04D9:1603.0005: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-.&checktime(0000,00,1,':')d.0-1/input1 [50764.528065] usb 6-1: USB disconnect, address 3 [50778.812879] hub 2-0:1.0: unable to enumerate USB device on port 1 [50780.728542] usb 2-1: new high speed USB device using ehci_hcd and address 9 [50780.864230] scsi9 : usb-storage 2-1:1.0 [50803.152533] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50803.964039] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50810.476040] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50811.000049] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50811.896058] usb 2-1: reset high speed USB device using ehci_hcd and address 9 [50812.341730] scsi 9:0:0:0: Device offlined - not ready after error recovery [51414.253794] sd 6:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB) [51414.254536] sd 6:0:0:0: [sdb] Assuming drive cache: write through [51414.256284] sd 6:0:0:0: [sdb] Assuming drive cache: write through [51414.256293] sdb: sdb1 [51418.644562] Skipping EDID probe due to cached edid [51985.737638] usb 2-1: USB disconnect, address 9 [51997.604332] hub 2-0:1.0: unable to enumerate USB device on port 1 [51999.524043] usb 2-1: new high speed USB device using ehci_hcd and address 11 [51999.662074] scsi10 : usb-storage 2-1:1.0 [52022.160040] usb 2-1: reset high speed USB device using ehci_hcd and address 11 [52022.976053] usb 2-1: reset high speed USB device using ehci_hcd and address 11 [52029.504804] usb 2-1: reset high speed USB device using ehci_hcd and address 11 [52030.028037] usb 2-1: reset high speed USB device using ehci_hcd and address 11 [52030.984040] usb 2-1: reset high speed USB device using ehci_hcd and address 11 [52031.384953] scsi 10:0:0:0: Device offlined - not ready after error recovery

AltStyle によって変換されたページ (->オリジナル) /