URL: https://linuxfr.org/forums/linux-debutant/posts/aide-pour-un-modem-eci-b-focus Title: Aide pour un Modem ECI b-Focus :( Authors: Ibrahim FARHAT Date: 2004年12月26日T12:34:17+01:00 Tags: Score: 0 Bonsoir a tous je comprend pas j'ai installer le drivers tout marche nikel sa synchronise mais j'arrive poas a acceder sur le net, merci d'avance de votre aide je vous donne le log :) : [EciAdsl 1/5] Setting up USB support... Preliminary USB device filesystem is OK [EciAdsl 2/5] Uploading firmware... GlobeSpan USB ADSL WAN Modem compatible modem found (in 2328ms) eciadsl-firmware: success firmware loaded successfully [EciAdsl 3/5] Synchronization... Progress indicator is 01 No Signal ! Progress indicator is a0 No Signal ! Progress indicator is a1 Training... Progress indicator is a1 Training... Progress indicator is 43 Training... Progress indicator is a4 Training... Progress indicator is a4 Training... Progress indicator is 74 Training... Progress indicator is a6 Training... Progress indicator is 77 Training... Progress indicator is 75 Training... Progress indicator is aa Training... Progress indicator is 72 Training... Progress indicator is ad Training... eciadsl-synch: success Synchronization successful Mounting devpts filsystem... mount: devpts est déjà monté ou /dev/pts est occupé failed to mount [EciAdsl 4/5] Connecting to provider... using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/pts/2 sent [LCP ConfReq id=0x1 <magic 0x4aca7b1e>] rcvd [LCP ConfReq id=0x5d <mru 1500> <auth chap MD5> <magic 0x6b02f072>] sent [LCP ConfAck id=0x5d <mru 1500> <auth chap MD5> <magic 0x6b02f072>] rcvd [LCP ConfAck id=0x1 <magic 0x4aca7b1e>] rcvd [CHAP Challenge id=0x1 <427ab417021f9d3f6be8416e23c2aaf9>, name = "A9MITRY__05"] sent [CHAP Response id=0x1 <680c393de3d39d560eb54e7d82285eb4>, name = "ibrahim.farhat@cegetel.net"] rcvd [CHAP Success id=0x1 "CHAP authentication success, unit 10756"] CHAP authentication succeeded: CHAP authentication success, unit 10756 sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] rcvd [IPCP ConfReq id=0x5b <addr 80.125.96.1>] sent [IPCP ConfAck id=0x5b <addr 80.125.96.1>] sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>] rcvd [IPCP ConfNak id=0x1 <addr 80.125.97.207> <ms-dns1 217.19.192.132> <ms-dns3 217.19.192.131>] sent [IPCP ConfReq id=0x2 <addr 80.125.97.207> <ms-dns1 217.19.192.132> <ms-dns3 217.19.192.131>] rcvd [IPCP ConfAck id=0x2 <addr 80.125.97.207> <ms-dns1 217.19.192.132> <ms-dns3 217.19.192.131>] local IP address 80.125.97.207 remote IP address 80.125.96.1 primary DNS address 217.19.192.132 secondary DNS address 217.19.192.131 Connection successful [EciAdsl 5/5] Setting up route table... Waiting for ppp0... Adding default route... default route to ppp0 already exists Avec le route -n [root@localhost farhat]# route -n Table de routage IP du noyau Destination Passerelle Genmask Indic Metric Ref Use Iface 80.125.96.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 80.125.96.1 0.0.0.0 UG 0 0 0 ppp0 [root@localhost farhat]# ifconfig ppp0 ppp0 Lien encap:Protocole Point-à-Point inet adr:80.125.97.207 P-t-P:80.125.96.1 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:905 errors:0 dropped:0 overruns:0 frame:0 TX packets:903 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:3 RX bytes:48255 (47.1 Kb) TX bytes:56819 (55.4 Kb) Avec eciaadsl-doctor You are using linux kernel version 2.6.8.1-12mdk Support for USB is OK Preliminary USB device filesystem is OK dabusb module is not loaded: OK UHCI support is OK OHCI support is not needed /dev/ppp is OK HDLC support is OK HDLC support is OK (no bug) You are using pppd version 2.4.2 (untested) You have an /etc/ppp/options file. Options in this file may conflict with options from /etc/ppp/peers/adsl. We suggest to remove this file or make a backup copy. PPP connection is OK Default route over ppp0 is OK Everything is OK

AltStyle によって変換されたページ (->オリジナル) /