URL: https://linuxfr.org/forums/linux-debian-ubuntu/posts/smartmontools-ssd Title: Smartmontools - SSD. Authors: Tanouky Date: 2014年12月16日T19:47:41+01:00 License: CC By-SA Tags: debian Score: 2 Bonjour, Voici mes données smartmontools pour mon SSD. Je ne comprends pas les erreurs...Par exemple, l'indication de "Power_on_Hours" est strictement beaucoup trop haute. :) Est-ce qu'il y a un moyen de vérifier l'état des cellules d'un SSD ? Il paraît qu'on peut écrire environ 10 000 fois chacune d'elle...et j'aimerais préserver mes données si possible. Je suis sous Debian Wheezy. smartctl -a /dev/sda smartctl 5.41 2011年06月09日 r3365 [x86_64-linux-3.14-0.bpo.1-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2CT060A3 Serial Number: CVMP247305FB060AGN LU WWN Device Id: 5 001517 387ebfcf4 Firmware Version: 300i User Capacity: 60 022 480 896 bytes [60,0 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Tue Dec 16 19:44:05 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2097) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 000 000 000 Old_age Always - 101679056667940 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1092 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1080 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 208055 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 208055 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 200710 249 Unknown_Attribute 0x0013 100 100 000 Pre-fail Always - 5225 SMART Error Log not supported SMART Self-test Log not supported Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

AltStyle によって変換されたページ (->オリジナル) /