URL: https://linuxfr.org/forums/linux-debian-ubuntu/posts/probleme-boot-sata-badcrc Title: Probleme boot sata BadCrc Authors: easydoor Date: 2006年06月11日T17:12:19+02:00 Tags: Score: 0 Bonjour, à chaque boot j'ai des erreurs de type "{ Drive Satus Error Bad CRC }" qui plantent le démarrage mais de temps en temps ça passe et le sytème démarre. Je vous fournis les infos suivantes : Debian sid 2.6.16-2-k7 (mais l'erreur se produit aussi si je boote sur la 2.6.15-1) 1 DDur Seagate Barracouda 1 Controleur Générique SATA/Raid sur port PCI ext3 A noter : une erreur d'écriture sur le disque se produit lors de l'install du driver son pour la geforce 2, mais le reste passe. Sur la debien etch 2.6.15, il n'y avait de problème. ** Quand le disque boot ne passe pas j'ai des message du style : ** ata1: error0x84 {Drive Starus error BadCRC} ata1:translated ATA stat/err 0x15x84 to scsi SK/ASC/ASCQ scci error return code=0x800002 sda:Current:sensekey: Aborted command [..] scsi parity error sector 13769415 (cette valeur change à chaque boot bien entendu) ATA:abnormal status 0xD0 port 0DFA7 ** dmesg (quand le boot passe) ** J'ai mis en gras ce qui m'interpelle caps: 0383fbff c1cbfbff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Sempron(tm) 2600+ stepping 01 Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 4290k freed NET: Registered protocol family 16 ** ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 ** ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ** PCI: nForce2 C1 Halt Disconnect fixup ** Boot video device is .&checktime(0000,01,00,':').0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *10 ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *7 ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *3 ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *10 ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10 ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x480-0x487 has been reserved pnp: 00:0a: ioport range 0xd00-0xd07 has been reserved PCI: Bridge: .&checktime(0000,00,08,':').0 IO window: d000-dfff MEM window: fdd00000-fe0fffff PREFETCH window: disabled. PCI: Bridge: .&checktime(0000,00,1,':')e.0 IO window: disabled. MEM window: f9b00000-fdcfffff PREFETCH window: 99a00000-b99fffff PCI: Setting latency timer of device .&checktime(0000,00,08,':').0 to 64 audit: initializing netlink socket (disabled) audit(1150027322.432:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 5, 131072 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI wakeup devices: PCI0 PS2K PS2M UAR1 MAC USB0 USB1 USB2 PCI1 MDM ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 144k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ** ALI15X3: IDE controller at PCI slot .&checktime(0000,02,06,':').1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16 ACPI: PCI Interrupt .&checktime(0000,02,06,':').1[A] -> Link [LNKA] -> GSI 16 (level, high) -> IRQ 177 ALI15X3: chipset revision 198 ALI15X3: 100% native mode on irq 177 ide0: BM-DMA at 0xdf90-0xdf97, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xdf98-0xdf9f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... SCSI subsystem initialized libata version 1.20 loaded. ** usbcore: registered new driver usbfs usbcore: registered new driver hub forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ** Probing IDE interface ide1... NFORCE2: IDE controller at PCI slot .&checktime(0000,00,09,':').0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE2: .&checktime(0000,00,09,':').0 (rev a2) UDMA133 controller ide2: BM-DMA at 0xffa0-0xffa7, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdg:DMA, hdh:pio Probing IDE interface ide2... hde: ST380011A, ATA DISK drive ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide3... hdg: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive ide3 at 0x170-0x177,0x376 on irq 15 sata_uli .&checktime(0000,02,06,':').0: version 0.5 ** ACPI: PCI Interrupt .&checktime(0000,02,06,':').0[A] -> Link [LNKA] -> GSI 16 (level, high) -> IRQ 177 ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22 ACPI: PCI Interrupt .&checktime(0000,00,04,':').0[A] -> Link [LKLN] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device .&checktime(0000,00,04,':').0 to 64 ata1: SATA max UDMA/133 cmd 0xDF88 ctl 0xDF86 bmdma 0xDF50 irq 177 ata2: SATA max UDMA/133 cmd 0xDF68 ctl 0xDF82 bmdma 0xDF58 irq 177 hde: max request size: 512KiB hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hde: cache flushes supported hde: hde1 hdg: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ata1: SATA link up 1.5 Gbps (SStatus 113) ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata1: dev 0 ATA-7, max UDMA/133, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/133 ** scsi0 : sata_uli ata2: SATA link down (SStatus 0) scsi1 : sata_uli Vendor: ATA Model: ST3808110AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda ** eth0: forcedeth.c: subsystem: 01043:80a7 bound to .&checktime(0000,00,04,':').0 ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 ACPI: PCI Interrupt .&checktime(0000,00,02,':').0[A] -> Link [LUS0] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device .&checktime(0000,00,02,':').0 to 64 ohci_hcd .&checktime(0000,00,02,':').0: OHCI Host Controller ohci_hcd .&checktime(0000,00,02,':').0: new USB bus registered, assigned bus number 1 ohci_hcd .&checktime(0000,00,02,':').0: irq 193, io mem 0xfe900000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 ACPI: PCI Interrupt .&checktime(0000,00,02,':').1[B] -> Link [LUS1] -> GSI 20 (level, high) -> IRQ 201 PCI: Setting latency timer of device .&checktime(0000,00,02,':').1 to 64 ohci_hcd .&checktime(0000,00,02,':').1: OHCI Host Controller ohci_hcd .&checktime(0000,00,02,':').1: new USB bus registered, assigned bus number 2 ohci_hcd .&checktime(0000,00,02,':').1: irq 201, io mem 0xfea00000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 ACPI: PCI Interrupt .&checktime(0000,00,02,':').2[C] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 185 PCI: Setting latency timer of device .&checktime(0000,00,02,':').2 to 64 ehci_hcd .&checktime(0000,00,02,':').2: EHCI Host Controller ehci_hcd .&checktime(0000,00,02,':').2: debug port 1 PCI: cache line size of 64 is not supported by device .&checktime(0000,00,02,':').2 ehci_hcd .&checktime(0000,00,02,':').2: new USB bus registered, assigned bus number 3 ehci_hcd .&checktime(0000,00,02,':').2: irq 185, io mem 0xfeb00000 ehci_hcd .&checktime(0000,00,02,':').2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected ** Attempting manual resume EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. ** ohci_hcd .&checktime(0000,00,02,':').0: wakeup usb 1-2: new full speed USB device using ohci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4300 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4340 Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected NVIDIA nForce2 chipset agpgart: AGP aperture is 512M @ 0xc0000000 input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21 ACPI: PCI Interrupt .&checktime(0000,00,06,':').0[A] -> Link [LAUI] -> GSI 21 (level, high) -> IRQ 193 PCI: Setting latency timer of device .&checktime(0000,00,06,':').0 to 64 intel8x0_measure_ac97_clock: measured 52714 usecs intel8x0: clocking to 47443 input: ImPS/2 Generic Wheel Mouse as /class/input/input2 ts: Compaq touchscreen protocol output mice: PS/2 mouse device common for all mice ** nvsound: module license 'NVIDIA' taints kernel. nvsound: Unknown symbol remap_page_range ** Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k EXT3 FS on sda1, internal journal Probing IDE interface ide0... Probing IDE interface ide1... device-mapper: 4.5.0-ioctl (2005年10月04日) initialised: dm-devel@redhat.com ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4094 buckets, 32752 max) - 232 bytes per conntrack ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 ACPI: PCI Interrupt .&checktime(0000,01,00,':').0[A] -> Link [LNKB] -> GSI 18 (level, high) -> IRQ 209 ** NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006 ** agpgart: Found an AGP 3.0 compliant device at .&checktime(0000,00,00,':').0. agpgart: Putting AGP V3 device at .&checktime(0000,00,00,':').0 into 8x mode agpgart: Putting AGP V3 device at .&checktime(0000,01,00,':').0 into 8x mode eth0: no IPv6 routers present ABORTED IN=eth0 OUT= MAC=00:11:2f:ef:a9:64:00:0a:78:09:2a:da:08:00 SRC=72.14.205.19 DST=192.168.0.1 LEN=40 TOS=0x00 PREC=0x00 TTL=243 ID=21419 PROTO=TCP SPT=443 DPT=3787 SEQ=3114448915 ACK=4071613113 WINDOW=9700 RES=0x00 RST URGP=0 [..] ** ata1: translated ATA stat/err 0x51/84 to SCSI SK/ASC/ASCQ 0xb/47/00 ata1: status=0x51 { DriveReady SeekComplete Error } ata1: error=0x84 { DriveStatusError BadCRC } ** [..] Merci pour votre aide.****

AltStyle によって変換されたページ (->オリジナル) /