URL: https://linuxfr.org/forums/linux-debian-ubuntu/posts/probleme-airport-extreme2617impossible-de-se-connecter-%C3%A0-un Title: Probleme airport extreme/2.6.17/impossible de se connecter à un réseau wifi Authors: supermurgeman Date: 2006年06月04日T23:19:38+02:00 Tags: debian Score: 0 Salut, J'ai un **iBook g4 avec airport extreme** sous debian unstable, et je ne parviens pas à me connecter en wifi. Le plus étrange est que la carte fonctionne (avec le noyau 2.6.17-rc5), je peux repérer les réseaux avec iwlist, et même warXer avec Kismet! Pourtant, impossible de me connecter à mon réseau domestique (routeur D-Link DWL730AP). Ce réseau est ouvert/sans encryption. Au niveau des logs, **iwevent (quand j'essaie de me connecter en DHCP) renvoie: Waiting for Wireless Events from interfaces... 23:01:21.652826 eth1 Set Mode:Managed 23:01:21.662658 eth1 Set Encryption key:off 23:01:21.718612 eth1 Set Frequency=24.57 kHz (Channel 10) 23:01:21.724468 eth1 Set ESSID:"barbapoux" 23:01:22.011810 eth1 Scan request completed 23:01:56.307390 eth1 Set Mode:Managed 23:01:56.318789 eth1 Set Encryption key:off 23:01:56.333305 eth1 Set Frequency=24.57 kHz (Channel 10) 23:01:56.338976 eth1 Set ESSID:"barbapoux" 23:02:22.031107 eth1 Custom driver event:authenticating timed out 23:02:22.040047 eth1 Custom driver event:authenticating timed out Un petit **dmesg** m'informe également que ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> bcm43xx driver PCI: Enabling device .&checktime(0001,10,12,':').0 (0004 -> 0006) bcm43xx: Chip ID 0x4318, rev 0x2 bcm43xx: Number of cores: 4 bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243, disabled bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243, enabled bcm43xx: PHY connected bcm43xx: Detected PHY: Version: 3, Type 2, Revision 7 bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8) bcm43xx: Radio turned off bcm43xx: Radio turned off bcm43xx: PHY connected bcm43xx: Radio turned on bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 104, high: 96, index: 130) Call Trace: [DEDED960] [C0007CF0] show_stack+0x54/0x174 (unreliable) [DEDED990] [E2612C3C] bcm43xx_phy_lo_adjust+0x2f0/0x310 [bcm43xx] [DEDED9B0] [E2609FE4] bcm43xx_radio_set_txpower_bg+0x288/0x29c [bcm43xx] [DEDED9D0] [E2611B30] bcm43xx_phy_initb6+0x75c/0x8b8 [bcm43xx] [DEDED9F0] [E26137A8] bcm43xx_phy_initg+0x130/0xe60 [bcm43xx] [DEDEDA60] [E2614BD0] bcm43xx_phy_init+0x6f8/0x730 [bcm43xx] [DEDEDA80] [E2604C8C] bcm43xx_wireless_core_init+0x880/0x1084 [bcm43xx] [DEDEDB10] [E26064E0] bcm43xx_init_board+0x2e0/0x618 [bcm43xx] [DEDEDB40] [C01966FC] dev_open+0x64/0xc8 [DEDEDB60] [C01956DC] dev_change_flags+0x70/0x148 [DEDEDB80] [C01A0728] do_setlink+0x74/0x378 [DEDEDBB0] [C019FD00] rtnetlink_rcv_msg+0x204/0x230 [DEDEDBE0] [C01AA3A4] netlink_run_queue+0x98/0x188 [DEDEDC20] [C019FD6C] rtnetlink_rcv+0x40/0x6c [DEDEDC50] [C01AA4BC] netlink_data_ready+0x28/0x84 [DEDEDC60] [C01A7DA4] netlink_sendskb+0x34/0x70 [DEDEDC80] [C01AA138] netlink_sendmsg+0x260/0x27c [DEDEDCD0] [C018C428] sock_sendmsg+0xac/0xdc [DEDEDDC0] [C018C618] sys_sendmsg+0x1c0/0x24c [DEDEDF00] [C018CDB0] sys_socketcall+0x1ac/0x1e4 [DEDEDF40] [C0010D88] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff07be4 LR = 0xff07bd0 bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 104, high: 96, index: 130) Call Trace: [DEDED9A0] [C0007CF0] show_stack+0x54/0x174 (unreliable) [DEDED9D0] [E2612C3C] bcm43xx_phy_lo_adjust+0x2f0/0x310 [bcm43xx] [DEDED9F0] [E2614374] bcm43xx_phy_initg+0xcfc/0xe60 [bcm43xx] [DEDEDA60] [E2614BD0] bcm43xx_phy_init+0x6f8/0x730 [bcm43xx] [DEDEDA80] [E2604C8C] bcm43xx_wireless_core_init+0x880/0x1084 [bcm43xx] [DEDEDB10] [E26064E0] bcm43xx_init_board+0x2e0/0x618 [bcm43xx] [DEDEDB40] [C01966FC] dev_open+0x64/0xc8 [DEDEDB60] [C01956DC] dev_change_flags+0x70/0x148 [DEDEDB80] [C01A0728] do_setlink+0x74/0x378 [DEDEDBB0] [C019FD00] rtnetlink_rcv_msg+0x204/0x230 [DEDEDBE0] [C01AA3A4] netlink_run_queue+0x98/0x188 [DEDEDC20] [C019FD6C] rtnetlink_rcv+0x40/0x6c [DEDEDC50] [C01AA4BC] netlink_data_ready+0x28/0x84 [DEDEDC60] [C01A7DA4] netlink_sendskb+0x34/0x70 [DEDEDC80] [C01AA138] netlink_sendmsg+0x260/0x27c [DEDEDCD0] [C018C428] sock_sendmsg+0xac/0xdc [DEDEDDC0] [C018C618] sys_sendmsg+0x1c0/0x24c [DEDEDF00] [C018CDB0] sys_socketcall+0x1ac/0x1e4 [DEDEDF40] [C0010D88] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff07be4 LR = 0xff07bd0 bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 104, high: 96, index: 130) Call Trace: [DEDED960] [C0007CF0] show_stack+0x54/0x174 (unreliable) [DEDED990] [E2612C3C] bcm43xx_phy_lo_adjust+0x2f0/0x310 [bcm43xx] [DEDED9B0] [E2609FE4] bcm43xx_radio_set_txpower_bg+0x288/0x29c [bcm43xx] [DEDED9D0] [E2611398] bcm43xx_phy_init_pctl+0x270/0x2ac [bcm43xx] [DEDED9F0] [E2614464] bcm43xx_phy_initg+0xdec/0xe60 [bcm43xx] [DEDEDA60] [E2614BD0] bcm43xx_phy_init+0x6f8/0x730 [bcm43xx] [DEDEDA80] [E2604C8C] bcm43xx_wireless_core_init+0x880/0x1084 [bcm43xx] [DEDEDB10] [E26064E0] bcm43xx_init_board+0x2e0/0x618 [bcm43xx] [DEDEDB40] [C01966FC] dev_open+0x64/0xc8 [DEDEDB60] [C01956DC] dev_change_flags+0x70/0x148 [DEDEDB80] [C01A0728] do_setlink+0x74/0x378 [DEDEDBB0] [C019FD00] rtnetlink_rcv_msg+0x204/0x230 [DEDEDBE0] [C01AA3A4] netlink_run_queue+0x98/0x188 [DEDEDC20] [C019FD6C] rtnetlink_rcv+0x40/0x6c [DEDEDC50] [C01AA4BC] netlink_data_ready+0x28/0x84 [DEDEDC60] [C01A7DA4] netlink_sendskb+0x34/0x70 [DEDEDC80] [C01AA138] netlink_sendmsg+0x260/0x27c [DEDEDCD0] [C018C428] sock_sendmsg+0xac/0xdc [DEDEDDC0] [C018C618] sys_sendmsg+0x1c0/0x24c [DEDEDF00] [C018CDB0] sys_socketcall+0x1ac/0x1e4 [DEDEDF40] [C0010D88] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff07be4 LR = 0xff07bd0 bcm43xx: Chip initialized bcm43xx: DMA initialized bcm43xx: 80211 cores initialized bcm43xx: Keys cleared SoftMAC: Associate: Scanning for networks first. SoftMAC: Start scanning with channel: 1 SoftMAC: Scanning 14 channels bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1485:bcm43xx_find_lopair() bcm43xx: WARNING: Writing invalid LOpair (low: 104, high: 96, index: 130) Call Trace: [DFFCFCE0] [C0007CF0] show_stack+0x54/0x174 (unreliable) [DFFCFD10] [E2612C3C] bcm43xx_phy_lo_adjust+0x2f0/0x310 [bcm43xx] [DFFCFD30] [E2613498] bcm43xx_phy_lo_g_measure+0x83c/0xa1c [bcm43xx] [DFFCFDB0] [E2603CF8] bcm43xx_periodic_task_handler+0x100/0x340 [bcm43xx] [DFFCFDD0] [C0031DC8] run_timer_softirq+0x148/0x1c4 [DFFCFE00] [C002D514] __do_softirq+0x64/0xe4 [DFFCFE20] [C0005888] do_softirq+0x50/0x74 [DFFCFE30] [C002D284] irq_exit+0x38/0x48 [DFFCFE40] [C0005824] do_IRQ+0x64/0x78 [DFFCFE60] [C0011430] ret_from_except+0x0/0x14 --- Exception: 501 at bcm43xx_ieee80211_set_chan+0xd0/0xe4 [bcm43xx] LR = bcm43xx_ieee80211_set_chan+0x50/0xe4 [bcm43xx] [DFFCFF40] [E245CE00] ieee80211softmac_scan+0x50/0x180 [ieee80211softmac] [DFFCFF60] [C0038A58] run_workqueue+0xa4/0x108 [DFFCFF70] [C0038C6C] worker_thread+0xe4/0x12c [DFFCFFC0] [C003C9A0] kthread+0xc4/0x100 [DFFCFFF0] [C0011F44] kernel_thread+0x44/0x60 ADDRCONF(NETDEV_UP): eth1: link is not ready bcm43xx: set security called bcm43xx: .level = 0 bcm43xx: .enabled = 0 bcm43xx: .encrypt = 0 SoftMAC: Associate: Scanning for networks first. SoftMAC: Associate: failed to initiate scan. Is device up? SoftMAC: Scanning finished SoftMAC: Queueing Authentication Request to 00:11:95:4b:48:cf SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: Queueing Authentication Request to 00:11:95:4b:48:cf SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. bcm43xx: set security called bcm43xx: .level = 0 bcm43xx: .enabled = 0 bcm43xx: .encrypt = 0 SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Sent Authentication Request to 00:11:95:4b:48:cf. SoftMAC: Authentication timed out with 00:11:95:4b:48:cf SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: Authentication timed out with 00:11:95:4b:48:cf SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: cannot associate without being authenticated, requested authentication SoftMAC: cannot associate without being authenticated, requested authentication J'en déduis qu'il y a un problème d'authentification! Quelqu'un sait comment régler ça? Merci, joe**

AltStyle によって変換されたページ (->オリジナル) /