URL: https://linuxfr.org/forums/linux-debian-ubuntu/posts/mbr-windows Title: MBR windows Authors: elloco Date: 2005年03月27日T14:42:27+02:00 Tags: Score: 0 Salut, j'ai un petit problème, j'ai installer une sarge et je n'arrive plus à redémarrer mon windows, dans lilo, je vois bien les deux mais quand je vais sur windows, il met juste "Loading Windows" et ne fait rien d'autre. Voici la liste des partition en faisant "fdisk -l" Disk /dev/hda: 82.3 GB, 82348277760 bytes 15 heads, 63 sectors/track, 170197 cylinders Units = cylinders of 945 * 512 = 483840 bytes £spaces£ £/spaces£Device Boot Start End Blocks Id System /dev/hda1 * 1 86683 40957686 7 HPFS/NTFS /dev/hda2 86684 170187 39455640 5 Extended /dev/hda5 86684 168147 38491708+ 83 Linux /dev/hda6 168148 170187 963868+ 82 Linux swap Je précise que je n'ai qu'un seul disque dur. Voici mon lilo.conf # /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', # --------------- `install-mbr(8)', `/usr/share/doc/lilo/', # and `/usr/share/doc/mbr/'. # +---------------------------------------------------------------+ # | !! Reminder !! | # | | # | Don't forget to run `lilo' after you make changes to this | # | conffile, `/boot/bootmess.txt' (if you have created it), or | # | install a new kernel. The computer will most likely fail to | # | boot if a kernel-image post-install script or you don't | # | remember to run `lilo'. | # | | # +---------------------------------------------------------------+ # Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/hda # Specifies the device that should be mounted as root. (`/') # root=/dev/hda5 # Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using `compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact # Installs the specified file as the new boot sector # You have the choice between: text, bmp, and menu # Look in lilo.conf(5) manpage for details # #install=menu # Specifies the location of the map file # map=/boot/map # You can set a password here, and uncomment the `restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an `append' # statement in `lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like `Linux init=/bin/sh', # and thus becoming `root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use `install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM `install-mbr(8)'. # # password=tatercounter2000 # Specifies the number of deciseconds (0.1 seconds) LILO should # wait before booting the first image. # #delay=20 # You can put a customized boot message up if you like. If you use # `prompt', and this computer may need to reboot unattended, you # must specify a `timeout', or it will sit there forever waiting # for a keypress. `single-key' goes with the `alias' lines in the # `image' configurations below. eg: You can press `1' to boot # `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'. # # message=/boot/bootmess.txt £spaces£ £/spaces£prompt £spaces£ £/spaces£delay=100 £spaces£ £/spaces£timeout=100 # Specifies the VGA text mode at boot time. (normal, extended, ask, ) # # vga=ask # vga=9 # vga=normal # Kernel command line options that apply to all installed images go # here. See: The `boot-prompt-HOWTO' and `kernel-parameters.txt' in # the Linux kernel `Documentation' directory. # # append="" # If you used a serial console to install Debian, this option should be # enabled by default. # serial= # # Boot up Linux by default. # default=Linux image=/vmlinuz £spaces£ £/spaces£label=Linux £spaces£ £/spaces£read-only # restricted # alias=1 £spaces£ £/spaces£initrd=/initrd.img image=/vmlinuz.old £spaces£ £/spaces£label=LinuxOLD £spaces£ £/spaces£read-only £spaces£ £/spaces£optional # restricted # alias=2 £spaces£ £/spaces£initrd=/initrd.img.old # If you have another OS on this machine to boot, you can uncomment the # following lines, changing the device name on the `other' line to # where your other OS' partition is. # # other=/dev/hda4 # label=HURD # restricted # alias=3 other=/dev/hda1 £spaces£ £/spaces£label=Windows # restricted # alias=2 et enfin le fstab # /etc/fstab: static file system information. # # <file system> <mount point> proc /proc proc defaults 0 0 /dev/hda5 / ext3 defaults,errors=remount-ro 0 1 /dev/hda6 none swap sw 0 0 /dev/hdd /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/hdc /media/cdrom1 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/hda1 /mnt/windows ntfs user,auto,iocharset=iso8859-15,umask=020 £spaces£ £/spaces0ドル 0 je ne sais pas comment réparer le MBR de windows. Merci.

AltStyle によって変換されたページ (->オリジナル) /