URL: https://linuxfr.org/forums/linux-debian-ubuntu/posts/maintenance-disque-dur Title: Maintenance disque dur Authors: electro575 Date: 2020年05月15日T17:08:56+02:00 License: CC By-SA Tags: Score: 0 Bonjour à tous, Je viens de regarder l'état de mes disques dur, pourriez-vous me dire si ils vous semble encore en bon état ou non ? Ils ont déjà pas mal d'heures au compteur. Cette ligne est particulière, Error 1 occurred at disk power-on lifetime: 151 hours (6 days + 7 hours) When the command that caused the error occurred, the device was active or idle. Pour ainsi dire, mon serveur se bash à peu près toute les 3 semaines sans savoir vraiment pourquoi depuis 7 mois, ... ça ne dois pas aider mes HDD. Merci d'avance ``` root@mon_pc:~# smartctl --all /dev/sda smartctl 6.6 2017年11月05日 r4594 [x86_64-linux-4.19.0-8-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA HDWA120 Serial Number: Z66XSXZAS LU WWN Device Id: 5 000039 fe5cd143d Firmware Version: MZ4OACF0 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5700 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri May 15 16:56:28 2020 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (17863) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 298) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 144 144 054 Pre-fail Offline - 84 3 Spin_Up_Time 0x0007 153 153 024 Pre-fail Always - 220 (Average 235) 4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 4626 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 33 9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19534 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 223 192 Power-Off_Retract_Count 0x0032 096 096 000 Old_age Always - 5060 193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 5060 194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 18/43) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 151 hours (6 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 63 7d 65 4d 0f Error: ICRC, ABRT 99 sectors at LBA = 0x0f4d657d = 256730493 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 63 7d 65 4d 4f ff 07:59:03.710 WRITE DMA EXT 35 00 f0 f0 64 4d 40 00 07:58:53.265 WRITE DMA EXT 35 00 f0 00 64 4d 40 00 07:58:53.259 WRITE DMA EXT 35 00 f0 10 63 4d 40 00 07:58:53.253 WRITE DMA EXT 35 00 f0 20 62 4d 40 00 07:58:53.247 WRITE DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ```

AltStyle によって変換されたページ (->オリジナル) /