URL: https://linuxfr.org/forums/linux-debian-ubuntu/posts/dma-problem-on-hard-disk Title: DMA Problem on HARD-DISK Authors: sven Date: 2005年04月22日T10:09:51+02:00 Tags: debian Score: 0 Hello all, I just setup a debian woody unstable on my ShuttleX : configuration : Debian GNU-Linux 2.6.11.7 woody/unstable on i686 AMD ATHLON 1800+ The Shuttle motherboard type : SN41G2 - NVIDIA nForce2-GT chipset FN41 - 1xDDR400-512Mb - Integrated GeForce4 MX core - channel sound (MCP-T and AC'97 codec Realtek ALC650)- PCI typical of XPC. When I'm trying to use hdparm on the /dev/hda here is a problem : kain:/home/frederic# hdparm -c1 -d1 /dev/hda /dev/hda: setting 32-bit IO_support flag to 1 setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted IO_support = 1 (32-bit) using_dma = 0 (off) the kernel .config options : lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x x x <*> ATA/ATAPI/MFM/RLL support x x x x <*> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support x x x x --- Please see Documentation/ide.txt for help/info on IDE drives x x x x [ ] Support for SATA (deprecated; conflicts with libata SATA driver) x x x x [ ] Use old disk-only driver on primary interface x x x x <*> Include IDE/ATA-2 DISK support x x x x [*] Use multi-mode by default x x x x <*> Include IDE/ATAPI CDROM support x x x x < > Include IDE/ATAPI TAPE support (EXPERIMENTAL) x x x x <*> Include IDE/ATAPI FLOPPY support x x x x <*> SCSI emulation support x x x x [ ] IDE Taskfile Access x x x x --- IDE chipset support/bugfixes x x x x <*> generic/default IDE chipset support x x x x [ ] CMD640 chipset bugfix/support x x x x [ ] PNP EIDE support x x x x [*] PCI IDE chipset support x x x x [*] Sharing PCI IDE interrupts support x x x x [ ] Boot off-board chipsets first support x x x x <*> Generic PCI IDE Chipset Support x x x x < > OPTi 82C621 chipset enhanced support (EXPERIMENTAL) x x x x < > RZ1000 chipset bugfix/support x x x x [*] Generic PCI bus-master DMA support x x x x [*] Force enable legacy 2.0.X HOSTS to use DMA x x x x [*] Use PCI DMA by default when available x x x x [ ] Enable DMA only for disks x x x x < > AEC62XX chipset support x x x x < > ALI M15x3 chipset support x x x x < > AMD and nVidia IDE support x x x x < > ATI IXP chipset IDE support x x x x < > CMD64{3|6|8|9} chipset support x x x x < > Compaq Triflex IDE support x x x x < > CY82C693 chipset support x x x x < > Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL) x x x x < > Cyrix/National Semiconductor CS5530 MediaGX chipset support x x x mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqv(+)qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj x i think i have setted up it correctly. i need help . thx before =)