続いて HS-DHGL
BUFFALO INC. LinkStation series HS-DHGL(JINMU) HS-DHGLEA2 login: root root@HS-DHGLEA2:~#
root@HS-DHGLEA2:~# date Thu Feb 5 05:18:09 JST 2009 root@HS-DHGLEA2:~# date 02272135 Fri Feb 27 21:35:00 JST 2009 root@HS-DHGLEA2:~#長い間電源を入れていなかったので?、時計が狂っていた。
root@HS-DHGLEA2:~# tail -f /var/log/messages Feb 27 21:36:49 HS-DHGLEA2 kernel: usb 2-1: new high speed USB device using ehci_platform and address 2 Feb 27 21:36:49 HS-DHGLEA2 kernel: usb 2-1: configuration #1 chosen from 1 choice Feb 27 21:36:49 HS-DHGLEA2 kernel: scsi2 : SCSI emulation for USB Mass Storage devices Feb 27 21:36:54 HS-DHGLEA2 kernel: Vendor: SAMSUNG Model: JDPPB08546 Rev: 0-05 Feb 27 21:36:54 HS-DHGLEA2 kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 27 21:36:54 HS-DHGLEA2 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) Feb 27 21:36:54 HS-DHGLEA2 kernel: sdb: Write Protect is off Feb 27 21:36:54 HS-DHGLEA2 kernel: sdb: assuming drive cache: write through Feb 27 21:36:54 HS-DHGLEA2 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) Feb 27 21:36:54 HS-DHGLEA2 kernel: sdb: Write Protect is off Feb 27 21:36:54 HS-DHGLEA2 kernel: sdb: assuming drive cache: write through Feb 27 21:36:54 HS-DHGLEA2 kernel: sdb: sdb1 sdb2 sdb3 sdb4 Feb 27 21:36:54 HS-DHGLEA2 kernel: sd 2:0:0:0: Attached scsi disk sdb Feb 27 21:36:54 HS-DHGLEA2 kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0 Feb 27 21:36:56 HS-DHGLEA2 kernel: kjournald starting. Commit interval 5 seconds Feb 27 21:36:56 HS-DHGLEA2 kernel: EXT3 FS on sdb1, internal journal Feb 27 21:36:56 HS-DHGLEA2 kernel: EXT3-fs: mounted filesystem with ordered data mode.
root@HS-DHGLEA2:~# df Filesystem 1k-blocks Used Available Use% Mounted on /dev/sda2 493212 280576 212636 57% / /dev/ram1 15360 120 15240 1% /mnt/ram /dev/ls_disk1_1 287785 14890 258037 5% /boot /dev/ls_disk1_6 243057136 67148 242989988 0% /mnt/disk1 /dev/ls_usbdisk2_1 194443 10646 173758 6% /mnt/usbdisk2 root@HS-DHGLEA2:~# umount /mnt/usbdisk2/ root@HS-DHGLEA2:~#
root@HS-DHGLEA2:~# fdisk -l /dev/sdb Disk /dev/sdb: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdb1 1 25 200781 83 Linux /dev/sdb2 26 524 4008217+ 83 Linux /dev/sdb3 525 556 257040 82 Linux swap /dev/sdb4 557 30401 239729962+ 83 Linux root@HS-DHGLEA2:~#既にハックキットがインストールしてある HDD なので、 パーティションは設定済
root@HS-DHGLEA2:~# cd /mnt/disk1/share/hackkit/ root@HS-DHGLEA2:/mnt/disk1/share/hackkit# cp hackkit_config.sample hackkit_config root@HS-DHGLEA2:/mnt/disk1/share/hackkit# vi hackkit_config : : root@HS-DHGLEA2:/mnt/disk1/share/hackkit# cat !$ cat hackkit_config ADDRESS=192.168.2.46 HOSTNAME=slam root@HS-DHGLEA2:/mnt/disk1/share/hackkit#
root@HS-DHGLEA2:/mnt/disk1/share/hackkit# sh hackkit_090227.sh PRODUCTID = 0x0000000A formating hard drive ... mke2fs 1.27 (8-Mar-2002) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 50200 inodes, 200781 blocks 10039 blocks (5.00%) reserved for the super user First data block=1 25 block groups 8192 blocks per group, 8192 fragments per group 2008 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729 Writing inode tables: done Creating journal (4096 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. meta-data=/dev/sdb2 isize=256 agcount=8, agsize=125257 blks = sectsz=512 data = bsize=4096 blocks=1002054, imaxpct=25 = sunit=0 swidth=0 blks, unwritten=1 naming =version 2 bsize=4096 log =internal log bsize=4096 blocks=2560, version=1 = sectsz=512 sunit=0 blks realtime =none extsz=65536 blocks=0, rtextents=0 Setting up swapspace version 1, size = 263204864 bytes meta-data=/dev/sdb4 isize=256 agcount=58, agsize=1048576 blks = sectsz=512 data = bsize=4096 blocks=59932490, imaxpct=25 = sunit=0 swidth=0 blks, unwritten=1 naming =version 2 bsize=4096 log =internal log bsize=4096 blocks=29263, version=1 = sectsz=512 sunit=0 blks realtime =none extsz=65536 blocks=0, rtextents=0 mounting root file system ... extracting hackkit archive ... ./ ./var/ ./var/lib/ ./var/lib/apt/ ./var/lib/apt/lists/ ./var/lib/apt/lists/partial/ ./var/lib/apt/lists/ftp.jp.debian.org_debian_dists_lenny_Release : : ./opt/ ./media/ ./initrd/ copying miconapl ... usr/local/sbin/miconapl usr/local/lib/libbuffalo_bin.so creating miconapl ... creating fancontrol ... creating kernelmon ... copying /lib/modules ... lib/modules/ lib/modules/averusb.ko lib/modules/videodev.ko : : lib/modules/2.6.16.16-arm1/modules.symbols lib/modules/v4l1-compat.ko creating usb ... checking /dev/sdb1 fsck 1.27 (8-Mar-2002) e2fsck 1.27 (8-Mar-2002) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/sdb1: 11/50200 files (0.0% non-contiguous), 10465/200781 blocks mounting /boot ... copying /boot ... initrd.buffalo uImage.buffalo editing initrd ... 76973+1 records in 76973+1 records out gunziping /mnt/debinst/boot/initrd.gz ... gziping /mnt/debinst/boot/initrd ... wait 5 minutes Image Name: initrd Created: Fri Feb 27 21:48:31 2009 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4907983 Bytes = 4792.95 kB = 4.68 MB Load Address: 0x00000000 Entry Point: 0x00000000 unmount /boot ... umount: /mnt/debinst/boot: device is busy umount: /mnt/debinst/boot: device is busy root@HS-DHGLEA2:/mnt/disk1/share/hackkit#相変わらず umount できていないが、とりあえず終わった。
: : ---- in hackkit linuxrc --- XFS mounting filesystem sda2 VFS: Mounted root (xfs filesystem). Trying to move old root to /initrd ... okay Freeing init memory: 108K INIT: version 2.86 booting Setting the system clock. Activating swap...Adding 257032k swap on /dev/sda3. Priority:-1 extents:1 across:257032k done. Setting the system clock. Cleaning up ifupdown.... Loading kernel modules...done. Checking file systems...fsck 1.41.3 (12-Oct-2008) /dev/sda1: recovering journal /dev/sda1: Clearing orphaned inode 6025 (uid=0, gid=0, mode=0100644, size=14680064) /dev/sda1: Backing up journal inode block information. /dev/sda1: clean, 13/50200 files, 17079/200781 blocks /sbin/fsck.xfs: XFS file system. done. Setting kernel variables (/etc/sysctl.conf)...Unknown HZ value! (118) Assume 100. done. Mounting local filesystems...kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda4 done. Activating swapfile swap...done. Setting up networking.... Configuring network interfaces...eth0: link down done. eth0: link up<5>, full duplex<5>, speed 100 Mbps<5> err: >AnalyzeRecvPacket:This is invalid RespCode.(code=244) INIT: Entering runlevel: 2 Starting enhanced syslogd: rsyslogd. usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Starting internet superserver: inetd. Starting periodic command scheduler: crond. Debian GNU/Linux 5.0 slam ttyS0 slam login:起動してきた。
Debian GNU/Linux 5.0 slam ttyS0 slam login: guest Password: Linux slam 2.6.16.16-arm1 #69 Wed Oct 1 10:59:37 JST 2008 armv5tejl The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. No directory, logging in with HOME=/ guest@slam:/$
guest@slam:/$ su - root Password: slam:~#
slam:~# date Fri Feb 27 21:53:31 JST 2009 slam:~#あっている。
最初の設定の残りの設定と、
時刻同期、
Windows 向けファイルサーバまでスクリプトを使う。
(略)
slam:/tmp# tail -f /var/log/messages : : usb 2-1: new full speed USB device using ehci_platform and address 2 usb 2-1: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices Feb 27 22:01:00 slam kernel: usb 2-1: new full speed USB device using ehci_platform and address 2 Feb 27 22:01:00 slam kernel: usb 2-1: configuration #1 chosen from 1 choice Feb 27 22:01:00 slam kernel: scsi2 : SCSI emulation for USB Mass Storage devices Vendor: eUSB Model: Memory Stick Rev: 5.06 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 126912 512-byte hdwr sectors (65 MB) sdb: Write Protect is off sdb: assuming drive cache: write through SCSI device sdb: 126912 512-byte hdwr sectors (65 MB) sdb: Write Protect is off sdb: assuming drive cache: write through sdb:Feb 27 22:01:06 slam kernel: Vendor: eUSB Model: Memory Stick Rev: 5.06 Feb 27 22:01:06 slam kernel: Type: Direct-Access ANSI SCSI revision: 02 Feb 27 22:01:06 slam kernel: SCSI device sdb: 126912 512-byte hdwr sectors (65 MB) Feb 27 22:01:06 slam kernel: sdb: Write Protect is off Feb 27 22:01:06 slam kernel: SCSI device sdb: 126912 512-byte hdwr sectors (65 MB) Feb 27 22:01:06 slam kernel: sdb: Write Protect is off sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 Feb 27 22:01:07 slam kernel: sdb: sdb1 Feb 27 22:01:07 slam kernel: sd 2:0:0:0: Attached scsi removable disk sdb Feb 27 22:01:07 slam kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0マウントしてみる。
slam:/tmp# mkdir /tmp/usb slam:/tmp# mount /dev/sdb1 /tmp/usb/ slam:/tmp# ls /tmp/usb dcim memstick.ind slam:/tmp# umount /tmp/usb slam:/tmp#問題なさそう。
slam:/tmp# !tail tail -f /var/log/messages : : usb 2-1: new full speed USB device using ehci_platform and address 3 usb 2-1: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 Feb 27 22:03:17 slam kernel: usb 2-1: new full speed USB device using ehci_platform and address 3 Feb 27 22:03:17 slam kernel: usb 2-1: configuration #1 chosen from 1 choice Feb 27 22:03:17 slam kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005OK.
HS-DHGL 確認完了!次!