Chapter 23. Process Substitution

Piping the stdout of a command into the stdin of another is a powerful technique. But, what if you need to pipe the stdout of multiple commands? This is where process substitution comes in.

Process substitution feeds the output of a process (or processes) into the stdin of another process.

bash$ echo >(true) /dev/fd/63 bash$ echo <(true) /dev/fd/63 bash$ echo >(true) <(true) /dev/fd/63 /dev/fd/62 bash$ wc <(cat /usr/share/dict/linux.words) 483523 483523 4992010 /dev/fd/63 bash$ grep script /usr/share/dict/linux.words | wc 262 262 3601 bash$ wc <(grep script /usr/share/dict/linux.words) 262 262 3601 /dev/fd/63

Process substitution can compare the output of two different commands, or even the output of different options to the same command.

bash$ comm <(ls -l) <(ls -al)
total 12
-rw-rw-r-- 1 bozo bozo 78 Mar 10 12:58 File0
-rw-rw-r-- 1 bozo bozo 42 Mar 10 12:58 File2
-rw-rw-r-- 1 bozo bozo 103 Mar 10 12:58 t2.sh
 total 20
 drwxrwxrwx 2 bozo bozo 4096 Mar 10 18:10 .
 drwx------ 72 bozo bozo 4096 Mar 10 17:58 ..
 -rw-rw-r-- 1 bozo bozo 78 Mar 10 12:58 File0
 -rw-rw-r-- 1 bozo bozo 42 Mar 10 12:58 File2
 -rw-rw-r-- 1 bozo bozo 103 Mar 10 12:58 t2.sh

Process substitution can compare the contents of two directories -- to see which filenames are in one, but not the other.

diff <(ls $first_directory) <(ls $second_directory)

Some other usages and uses of process substitution:

read -a list < <( od -Ad -w24 -t u2 /dev/urandom ) # Read a list of random numbers from /dev/urandom, #+ process with "od" #+ and feed into stdin of "read" . . . # From "insertion-sort.bash" example script. # Courtesy of JuanJo Ciarlante.

PORT=6881 # bittorrent # Scan the port to make sure nothing nefarious is going on. netcat -l $PORT | tee>(md5sum ->mydata-orig.md5) | gzip | tee>(md5sum - | sed 's/-$/mydata.lz2/'>mydata-gz.md5)>mydata.gz # Check the decompression: gzip -d<mydata.gz | md5sum -c mydata-orig.md5) # The MD5sum of the original checks stdin and detects compression issues. # Bill Davidsen contributed this example #+ (with light edits by the ABS Guide author).

cat <(ls -l) # Same as ls -l | cat sort -k 9 <(ls -l /bin) <(ls -l /usr/bin) <(ls -l /usr/X11R6/bin) # Lists all the files in the 3 main 'bin' directories, and sorts by filename. # Note that three (count 'em) distinct commands are fed to 'sort'. diff <(command1) <(command2) # Gives difference in command output. tar cf >(bzip2 -c > file.tar.bz2) $directory_name # Calls "tar cf /dev/fd/?? $directory_name", and "bzip2 -c > file.tar.bz2". # # Because of the /dev/fd/<n> system feature, # the pipe between both commands does not need to be named. # # This can be emulated. # bzip2 -c < pipe > file.tar.bz2& tar cf pipe $directory_name rm pipe # or exec 3>&1 tar cf /dev/fd/4 $directory_name 4>&1 >&3 3>&- | bzip2 -c > file.tar.bz2 3>&- exec 3>&- # Thanks, St駱hane Chazelas

Here is a method of circumventing the problem of an echo piped to a while-read loop running in a subshell.

#!/bin/bash
# wr-ps.bash: while-read loop with process substitution.
# This example contributed by Tomas Pospisek.
# (Heavily edited by the ABS Guide author.)
echo
echo "random input" | while read i
do
 global=3D": Not available outside the loop."
 # ... because it runs in a subshell.
done
echo "\$global (from outside the subprocess) = $global"
# $global (from outside the subprocess) =
echo; echo "--"; echo
while read i
do
 echo $i
 global=3D": Available outside the loop."
 # ... because it does NOT run in a subshell.
done < <( echo "random input" )
# ^ ^
echo "\$global (using process substitution) = $global"
# Random input
# $global (using process substitution) = 3D: Available outside the loop.
echo; echo "##########"; echo
# And likewise . . .
declare -a inloop
index=0
cat 0ドル | while read line
do
 inloop[$index]="$line"
 ((index++))
 # It runs in a subshell, so ...
done
echo "OUTPUT = "
echo ${inloop[*]} # ... nothing echoes.
echo; echo "--"; echo
declare -a outloop
index=0
while read line
do
 outloop[$index]="$line"
 ((index++))
 # It does NOT run in a subshell, so ...
done < <( cat 0ドル )
echo "OUTPUT = "
echo ${outloop[*]} # ... the entire script echoes.
exit $?

This is a similar example.

#!/bin/bash
# psub.bash
# As inspired by Diego Molina (thanks!).
declare -a array0
while read
do
 array0[${#array0[@]}]="$REPLY"
done < <( sed -e 's/bash/CRASH-BANG!/' 0ドル | grep bin | awk '{print 1ドル}' )
# Sets the default 'read' variable, $REPLY, by process substitution,
#+ then copies it into an array.
echo "${array0[@]}"
exit $?
# ====================================== #
bash psub.bash
#!/bin/CRASH-BANG! done #!/bin/CRASH-BANG!

A reader sent in the following interesting example of process substitution.

# Script fragment taken from SuSE distribution: # --------------------------------------------------------------# while read des what mask iface; do # Some commands ... done < <(route -n) # ^ ^ First < is redirection, second is process substitution. # To test it, let's make it do something. while read des what mask iface; do echo $des $what $mask $iface done < <(route -n) # Output: # Kernel IP routing table # Destination Gateway Genmask Flags Metric Ref Use Iface # 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo # --------------------------------------------------------------# # As St駱hane Chazelas points out, #+ an easier-to-understand equivalent is: route -n | while read des what mask iface; do # Variables set from output of pipe. echo $des $what $mask $iface done # This yields the same output as above. # However, as Ulrich Gayer points out . . . #+ this simplified equivalent uses a subshell for the while loop, #+ and therefore the variables disappear when the pipe terminates. # --------------------------------------------------------------# # However, Filip Moritz comments that there is a subtle difference #+ between the above two examples, as the following shows. ( route -n | while read x; do ((y++)); done echo $y # $y is still unset while read x; do ((y++)); done < <(route -n) echo $y # $y has the number of lines of output of route -n ) More generally spoken ( : | x=x # seems to start a subshell like : | ( x=x ) # while x=x < <(:) # does not ) # This is useful, when parsing csv and the like. # That is, in effect, what the original SuSE code fragment does.