PC Engines apu1d product file

PC Engines Home
About \| APU2 \| Flash \| Tools \| Shop \| Support

apu1d	System board
Status	Sold out, please use apu2 series for new designs. Could still be produced for LARGE orders, given ample lead time.
Models	apu1d = 3 LAN, 2 GB DRAM, T40E CPU apu1d4 = 3 LAN, 4 GB DRAM, T40E CPU apu1c = 3 LAN, 2 GB DRAM, T40E CPU (EOL) apu1c4 = 3 LAN, 4 GB DRAM, T40E CPU (EOL)
Use with	case1d2blku / case1d2redu / case1d2bluu enclosures ac12veur3 / ac12vuk / ac12vus2 AC adapter msata16e mSATA SSD wle200nx / wle600vx miniPCI express wireless module
Spec	CPU: AMD G series T40E, 1 GHz dual Bobcat core with 64 bit support, 32K data + 32K instruction + 512K L2 cache per core DRAM: 2 or 4 GB DDR3-1066 DRAM Storage: Boot from SD card (connected through USB), external USB or mSATA SSD. 1 SATA + power connector. 12V DC, about 6 to 12W depending on CPU load. Jack = 2.5 mm, center positive Connectivity: 3 Gigabit Ethernet channels (Realtek RTL8111E) I/O: DB9 serial port, 2 USB external + 2 internal, three front panel LEDs, pushbutton Expansion: 2 miniPCI express (one with SIM socket), LPC bus, GPIO header, I2C bus, COM2 (3.3V RXD / TXD) Board size: 6 x 6" (152.4 x 152.4 mm) - same as ALIX.2D13 and WRAP.1E Firmware: coreboot Cooling: Conductive cooling from the CPU and south bridge to the enclosure using a 3 mm alu heat spreader (included).
Documentation	apu1.pdf
Howto	HowTo collection
Cooling assembly	apu cooling assembly instructions
BIOS update	Build 9/8/2014 (beta, reduced "spew level") Build 7/8/2014 (beta) Build 4/5/2014 (current production) Build 4/1/2014 (beta) Flash update can be done using flashrom, see our TinyCore Linux installer for easiest installation.
apu1d Revision notes	No stuff J12 SPI header to allow easier 2.5" SSD installation. Change bias supply for U7 VMEM / VTT regulator to V5A to fix suspend /resume support. Add CE, FCC symbols.
Schematic	PDF (1C) / PDF (1D)
Manufacturer	PC Engines
Origin	Taiwan
photo
photo
© 2002-2021 PC Engines GmbH. All rights reserved .