Number Description Version corrected1 on some versions of Windows, fails when run on a European Windows locale 1.3.02 regression in master DXCC selection 1.1.33 UTC date is incorrect, beginning 1-JAN-2001 1.1.54 DXCC table regeneration fails if a DXCC, location, or prefix field contains an apostrophe 1.5.85 D6 and E4 prefixes are incorrectly plotted 1.2.36 Hygain DCU controller fails to rotate 1.2.57 latitudes between 0 S and 0 1' N are incorrectly displayed, as are longitudes between 0 E and 0 1' W 1.2.68 title bar UTC clock is non-functional 1.2.79 direct entry of QTH latitude and longitude fails 1.2.810 in version 1.2.9, rotor control enable does not persist between sessions 1.3.011 runtime error: Control Array Element "0" Doesn't Exist 1.3.112 progress window (displayed when used with DXKeeper) is too short 1.3.213 DX spots (displayed when used with SpotCollector) obscure QTH and DX locations 1.3.214 Solar - QTH offset computed incorrectly 1.3.315 poor map colors when display adaptor is set to 256 colors 1.3.316 full install includes a DXCC database, over-writing user changes 1.3.417 full install fails to create a Database subfolder 1.4.418 mode filters are not saved between sessions 1.4.919 incoming spots are plotted whether they match the plot selection and filter criteria or not 1.5.120 gracefully handle null rotor settings recovered from windows registry 1.5.222 Terminator shading is incorrect 1.5.523 failures to establish DDE links with applications that have not yet started are erroneously logged as errors 1.5.624 corrected and completed tooltips on the Config window's Plot Filters tab 1.5.625 don't activate DXView's main window when displaying a beacon location on behalf of PropView 1.5.626 missing boundary between CQ zones 23 and 24 1.5.727 the colors of several countries become lighter rather than darker during night time 1.5.728 increase Hygain rotor positioning delay from 250ms to 500ms 1.5.729 "Oceania" misspelled on the world map with continent boundaries 1.5.830 when configured to plot log, spots are repainted each time the mouse moves 1.5.831 earth map display defect introduced in 1.5.8 1.6.032 if the Info window overlaps the area of the World Map window containing a spot, double-clicking on that spot fails to QSY a Commander-controlled transceiver 1.6.133 Spots button in Earth Map window's Plot panel isn't enabled until the first spot is received from SpotCollector 1.6.134 after a double-click in the Earth Map window, do not activate the Info window 1.6.235 eliminate inconsistencies between plotted spots and popups 1.6.336 record spot times in UTC to prevent inconsistencies during timezone or daylight savings time changes 1.6.337 when directed by another DXLab application to lookup a prefix, display the location and beam heading on the world map even if the Info window is minimized 1.6.338 if Info window was minimized when the previous session was terminated, then start with the Info window minimized 1.6.339 Expect the locale's decimal separator character in fields that accept decimal numeric values 1.6.340 World Map window title bar displays "time of last solar position update" continuously, independent of the Info window's windowstate 1.6.441 build World Map window dynamically so that space is not wasted on PCs with differing display aspect ratios 1.6.442 Plot function (Info window, Map panel) generates an error, and is unnecessarily disabled in several useful situations 1.6.543 when clicking on a RTTY code in the Progress panel, filter DXKeeper's log to show all QSOs in modes that count for RTTY, not just RTTY QSOs 1.6.744 corrects program error 384 in module DXEarth.Form_Paint: A form can't be moved or sized while minimized or maximized 1.6.845 KG4 callsigns with three-letter suffixes are in the United States, not Guantanamo Bay 1.7.046 when presented with a DDE callsign and prefix lookup request, don't generate an ErrorLog.txt entry if the prefix is empty; instead, perform a callsign lookup 1.7.247 replace MSFlexGrid with MSHFlexGrid in Sunrise/Sunset window 1.7.648 don't reload DXAtlas settings when restoring its window position 1.7.649 eliminate startup delay in displaying spots on DX Atlas 1.7.750 Reset Window command fails if one or more windows are minimized or maximized 1.7.851 Initialization error causes "file World.bmp not found" messages during startup on some PCs 1.7.852 correctly display the solar terminator when Windows is configured to use large fonts 1.8.053 properly restore DX Atlas settings when DXView starts with its built-in world map selected 1.8.054 eliminate errorlog.txt entry during DX Atlas shutdown 1.8.155 when a callsign's ITU zone is ambiguous, the ITU zone from the previous lookup persists instead of being cleared 1.8.356 positions displayed on DXAtlas can be off by as much as 1 degree 1.8.557 permit Ctlr-C, Ctrl-X, and Ctlr-V in the Main window's Callsign, Latitude, Longitude, Shortpath, and Longpath text boxes 1.8.658 properly update current prefix for DDE access 1.8.859 KG4 2x1 callsigns are in the US, not Guantanamo 1.9.060 when plotting a spot on the world map use a database lookup on the callsign to determine location unless the resulting DXCC entity doesn't match the specified prefix, in which case plot the prefix (correct regression introduced in 1.8.7) 1.9.061 bottom of Main window is not visible on all systems 1.9.462 the DXCC entity for a callsign bearing a /N where N is a single numeric digit should be determined by substituting N for the right-most digit in the prefix (rather than the left-most digit) 1.9.563 DXAtlas does not properly display plotted spots (regression introduced into 1.9.7) 1.9.864 ignore unreasonably large or small values of the settings in the Graphics panel on the Config window's Plot Settings tab 1.9.865 eliminate the possibility of opening a Log's progress table before initialization has been completed 1.9.866 properly decode the DXCC entity of callsigns like KG4XXX/B, KC4AAA/QRP, and KC4/AA6YQ 1.9.867 If DXView is started with DX Atlas selected as its map, DX spots do not reliably appear 2.0.168 on startup, correctly restore the World Map window to its state from the previous operating session 2.0.169 if DXView is terminated with the native world map window iconified and then later restarted, selecting the world map icon on the Windows task bar and selecting "restore" will display the world map without proper initialization 2.0.570 can't plot log progress without first plotting DX spots 2.0.771 after closing and then displaying the world map, the log plotting progress selectors are disabled 2.0.772 default rotor control serial port should be "none" 2.0.873 prevent terminator recursion by checking for grey rather than not white 2.0.974 LP-Rotor button appears on all Config window tabs 2.1.275 use HTTP format filenames when invoking the browser on a help file 2.1.576 from a prefix-mapping perspective, treat callsign/N where N is an integer great than 9 as callsign 2.1.877 eliminate mapping of KC4XXX to Antarctica; let the DXCC database identify individual Antarctic calls 2.1.878 for callsigns of the form A/B, if the length of A is equal to the length of B, then A designates the DXCC entity 2.1.979 modifying the DXCC database causes duplicate entries in the prefix and entity name selectors 2.2.080 country name not accessible to PropView (regression in 2.2.0) 2.2.181 tolerate invalid map overlay selection registry entry 2.2.282 prevent terminator inversion (regression introduced in 2.0.9) 2.2.383 improved robustness of DDE queue handlers 2.2.784 reTable fails (regression introduced in 2.2.5) 2.2.885 color progress grid cell backgrounds correctly when DXKeeper is not running 2.3.086 properly handle callsigns of the form RA3XX/4/P 2.3.287 6-character grid squares of the form Ix9xxx specify a longitude that's incorrect by up to 2 degrees 2.3.388 if a DXCC entity progress record is missing from the current log, notify the user immediately rather than record an entry in the errorlog.txt file 2.3.389 4-character gridsquares in the western hemisphere are converted to the wrong longitude (regression introduced in 2.3.3) 2.3.490 grid squares 1 degree west of the prime meridian or 1 degree north of the equator are incorrectly converted to latitude and longitude 2.3.591 remove the IOTA database from development releases 2.3.592 implement the IOTA label with a textbox control so that its tooltip will work correctly on dual monitor systems 2.3.693 properly display the position of IOTA tags whose position straddles 180W 2.3.794 properly display database versions when the IOTA or LotW databases are not present 2.4.195 when locked, only ignore DDE lookup requests designated as "ignorable" 2.4.196 correct initialization error that clears SpotCollector overrides when DXView starts 2.4.297 spot of station with an entity override causes DXView to replace its Search panel callsign with the spotted callsign 2.4.398 plot of spot of station with an entity override is not correctly positioned 2.4.499 correct failure to plot spot on the DX Atlas map if the built-in map was not previously activated (regression in 2.4.6) 2.4.7100 logged QSOs plotted on the DX Atlas map may be off by 1 degree 2.4.8101 ensure prompt response to DXKeeper's "NewLog" command during initialization 2.4.9102 ensure that all logged QSOs are displayed 2.4.9103 when switching between logs in DXKeeper, clear the logged QSOs display, and display DX spots 2.4.9104 allow Google map access from non-US locales 2.5.0105 eliminate erroneous "world map missing" popup (regression in 2.5.0) 2.5.1106 when enabling "Display Labels" on the DX Atlas map, remove any previous popup information 2.5.2107 consider the DX Atlas map's zoom property when determining where to print popup text for plots to the right of the DX Atlas map's center longitude 2.5.2108 properly initialize DX Atlas map when running with DX Atlas version 2.2.5 2.5.4109 don't generate an errorlog.txt entry when modifying the DX Atlas map's Display Labels setting while the built-in map is selected 2.5.5110 restore display of beam heading and auroral ovals when showing logged DXCC entities on the built-in world map 2.5.6111 Retain built-in map settings when the built-in map is closed and then re-opened, or when the DX Atlas map is selected and then the built-in map is selected 2.5.8112 ensure proper sizing of Sunrise Sunset window width 2.6.1113 correct error in 6th grid square character when converting from lat/lon 2.6.4114 ensure proper sizing of Sunrise Sunset window height 2.6.7115 correct precision error in grid-square to lat/lon conversion 2.7.0116 expand the Go button to a more reasonable size 2.7.1117 improve accuracy of distance calculation 2.7.2118 if rotator control is disabled, the antenna azimuth and path made available to other applications should be cleared 2.7.3119 if progress information for a DXCC entity cannot be found in the current log, inform the user how to correct the situation 2.7.3120 correctly select a DXCC entity by entity name 2.7.3121 when activating a CW spot with the CW mode panel set to CW-R, send the correct mode designator to Commander 2.7.4122 when activating a RTTY spot with the RTTY mode panel set to RTTY-R, send the correct mode designator to Commander 2.7.5123 spell "override" correctly 2.7.6124 don't enforce window width and height restrictions if "use dual monitors" is enabled 2.7.6125 correct defect in sunrise/sunset forecasts 2.7.7126 provide a queue for asynchronous lookups 2.8.0127 correct "Display info in title bars" caption 2.8.3128 don't save DX Atlas settings at DXView termination if DX Atlas isn't running 2.8.4129 with "Display info in title bars" disabled, display the version in the Main window's title bar 2.8.6130 if the Settings table in the DXCC database contains unexpected entries, display a message to the user rather than generate an errorlog.txt entry 2.8.6131 KC4 callsigns not found in the USAP database should not map to Antarctica 2.8.7132 KG4 callsigns not of length 5 should not map to Guantanamo 2.8.7133 Callsigns like N6TR/7 should return a generic 7-area location rather than perform a USAP lookup on N7TR 2.8.7134 USAP database lookups of stations in Washington DC should return a state of Maryland 2.8.8135 correct erroneous longitude tooltip in the GetQTH window 2.9.0136 when the QTH position is changed by clicking the Position button on the QTH panel on the Config window's General tab, immediately update the QTH sunrise and sunset times made available to other DXLab applications 2.9.4137 if Commander is running and antenna rotation is disabled for the current band, clear the antenna bearing made available to other DXLab applications 2.9.4138 restore the ability to minimize the world map window 2.9.5139 accept separate grid square confirmation status in plotted QSOs that does or doesn't include LotW confirmations as a function of DXKeeper's "Include LotW confirmations in VUCC, WAC, & Maidenhead awards progress" setting, and use this when plotting grid squares on the DX Atlas world map 2.9.7140 move Inet support functions from Common to InetCommon 2.9.8141 correct the popup explanations for items in the Available column on the Config window's Databases tab 3.0.3142 ensure that "New DB available" message does not appear unless a new database version is available 3.0.3143 correctly report program errors generated by access to the USAP database 3.0.6144 don't generate an errorlog.txt entry when a prefix is not found in the DXCC database 3.0.9145 don't generate an errorlog.txt entry when plotting a spot with a station whose continent is not specified in the DXCC database 3.0.9146 don't display "new DB available" if installed databases are up-to-date but an uninstalled database is available 3.1.0147 use 'A' rather than 'Y' in the DDE interface to designate a callsign that's Authenticity Guaranteed 3.1.0148 after installing the LotW or eQSL AG databases, update the Windows Registry so that DXKeeper and SpotCollector can on startup locate and open these databases 3.1.1149 make "Lifetime" label visible on the Config window's "Plot Settings" tab 3.1.2150 consult the USAP database when inspecting KH1, KH3, KH4, KH5, KH7, and KH9 callsigns 3.1.2151 don't generate errorlog.txt entries if an incorrect North Geomagnetic Pole location is specified 3.1.4152 after looking up a callsign that can't be mapped to an entity and location, clear all Info boxes 3.1.4153 don't generate an errorlog.txt entry if the user attempts to upgrade a database that is still in use 3.1.4154 prevent an errorlog.txt entry from being generated by DXViewConfig.UpdateCmd_Click 3.1.5155 clearing the Info window in response to a command from another application should not "steal" cursor focus 3.1.6156 when upgrading the USAP database, show the # of bytes to be downloaded as 13,000,000 3.1.9157 improve handling of callsigns of the form part1/part2 where part2 is a single letter 3.1.9158 repeat initialization of MapFolder 3.2.2159 properly signal the Launcher that a minimization command has been successfully executed 3.2.3160 when a plotted spot is double-clicked, ensure that the spot's location becomes the selected location 3.2.4161 accept a command to clear an override's local time 3.2.6162 in response to notification that an override's entity has been changed in SpotCollector, convey the entity's location, cq zone, itu zone, grid square, continent, and iota tag to SpotCollector so it can initialize the override 3.2.7163 accept a command to clear an override's expiration date 3.2.7164 prevent an errorlog.txt entry when installing the USAP database on a Vista system for the first time 3.2.8165 correct tab order on Config window's Override tab 3.2.9166 populate an override when striking the Enter key with focus in the override's entity selector, not when striking a letter key 3.2.9167 when directed to display the Config window's Database Upgrade window, check for the availability of new database releases 3.3.0168 when opening an LotW, eQSL, USAP, or IOTA database, gracefully handle missing tables 3.3.1167 label the column of Entity selectors in the "DXCC Entity, Location" sub-tab on the Config window's Override tab 3.3.2168 when performing a DXCC entity query without updating the World Map window, don't update the World Map because the Info window is minimized 3.3.3169 when using the DX Atlas world map, the Main window's Map Clear function should remove plotted spots from DX Atlas 3.3.4170 prevent a lookup operation initiated by another application from returning incorrect results 3.3.6171 corrects a regression in 3.3.7 that prevents a single-click of a Spot Database Entry from updating DXView's Main window 3.3.8172 clear the "last LotW upload" information displayed in the Main window's DXCC panel when selecting a DXCC prefix, DXCC entity, DXCC country code, grid square, latitude, longitude, IOTA tag, or location on the world map 3.4.2173 don't generate an errorlog.txt entry when opening an empty Special Callsign Database 3.4.4174 update the Translation window after lookup up a callsign via the USAP database 3.4.5175 if Translation is not enabled, disable the Main window's Xlate button 3.4.7176 after updating the Translation database, automatically re-open it 3.5.1177 corrects the display of plotted QSOs where one participant's longitude is 0 3.5.2178 if when looking up an IOTA tag no DXCC entity is uniquely designated, clear the Main window's Country Code 3.5.3179 when looking up an IOTA tag, clear the Main window's Special Callsign tags 3.5.3180 don't display the Translation window if it was minimized when DXView was last terminated 3.5.4181 upgrading the Translation database with Translation disabled should not enable Translation 3.5.4182 if the Translation database is installed and an upgrade is available, indicate the availability of the upgrade whether or not Translation is enabled 3.5.4183 enables the DXCC Database window's reTable button after a Master Table entry is deleted 3.5.5184 refuse to start if another instance is already running 3.5.9185 prevent errorlog.txt file entry in DDEClient.Freq_Change 3.6.0186 correct "Display Error Log" tooltip 3.6.2187 prevent depressing the CTRL key while the mouse cursor is located in the Entity selector on the "DXCC Entity, Location" sub-tab of the Configuration window's Overrides tab from subsequently preventing the population of cleared override components when an override entity is selected 3.6.2188 improve the accuracy of very short and very long distance calculations 3.6.3189 ensure that the terminator is correctly updated around 0Z 3.6.3190 ensure that the terminator is correctly updated around 0Z 3.6.4191 convert Maidenhead Locators to the latitude and longitude of the center of the specified square or sub-square rather than its southwest corner 3.6.5192 prevent the errorlog.txt file entry "N1MM.SetRotorPort: Control array element '0' doesn't exist" when the selected frequency does not map to a supported band 3.6.7193 don't generate an errorlog.txt entry in DXViewModule.GetTags if no SpecialCallsignDatabase exists 3.6.8194 update for consistency with new MapQuest API 3.6.8195 using the arrow keys to navigate the Override tab's Entity selector should not trigger automatic population of the Override 3.7.1196 don't attempt to perform a QRZ lookup if Pathfinder is not running 3.7.2197 properly compute fractional spot lifetimes in non-US geographies 3.7.2198 ensure that lines connecting DX and spotting stations on Google Earth are properly drawn 3.7.4199 don't display spotting stations on Google Earth if Spot "QSOs" is disabled 3.7.5200 prevent unnecessary eQSL/LotW database lookups 3.7.5201 properly plot information on Google Earth when operating from a non-English locale 3.7.6202 correct regression in support for N1MM Rotor V12.11 (and earlier) 3.7.7203 indicate when information displayed in the Main window was obtained from the IOTA database 3.7.8204 ignore decimal separator characters typed into latitude and longitude boxes 3.7.9205 correct a regression introduced in DXKeeper 3.7.3 that prevents the display of logged QSOs on the DX Atlas world map 3.7.9206 correctly handle the case where the new "Query IOTA Database" setting is enabled and a DXCC entity contains exactly one IOTA group 3.8.5207 prevent errorlog.txt entries from being generated in SunriseSunset.Form_Resize and SunriseSunset.Form_Load 3.9.1208 prevent partial Main window update when multiple requests are received 3.9.2209 notify DXKeeper when an override is cleared by clicking its X button 3.9.3210 don't generate an errorlog.txt file entry if the DX Atlas Font selector's Cancel button is clicked 3.9.6211 reduce the number of Antenna Presets visible if "Query Special Database" is disabled 3.9.8212 remove button erroneously added to 4.0.2 4.0.3213 when highlighting the Progress grid's band to reflect the transceiver frequency, use the "standard" frequency-to-band mapping to determine the transceiver band rather than user-specified band segment names 4.0.6214 prevent errorlog.txt file entries when terminating 4.0.8215 ignore sequentially redundant lookup directives 4.1.0216 back out #215 4.1.1217 ensure that PrefixLookup operations work correctly 4.1.2218 accept an Operating Mode update message from WinWarbler 4.1.2219 re-enable lookup bypass 4.1.3220 when directed to perform a lookup with the callsign box empty, immediately clear the plotted location and path 4.1.4221 enable the ScanDX function to cover the 60m and 4m bands, and retains the settings for scanning these bands between operating sessions 4.1.5222 if a lookup operation cannot identify a DXCC entity and the DXCC progress grid is being displayed, clear the DXCC progress grid 4.1.6223 prevent errorlog.txt file entry in DXViewModule.SelectLocation 4.1.7224 improve accuracy of distance calculations 4.1.7225 after upgrading to a DXCC database that requires DXKeeper and SpotCollector to Recompute, improve the message to the user to indicate that SpotCollector should be directed to Recompute after DXKeeper has finished Recomputing 4.1.8226 ensure that override modifications are conveyed to DXKeeper 4.1.8227 notice when PropView disconnects 4.2.0228 handle recursion in Common.Log 4.2.1229 if the temporary file used to download a database upgrade can't be deleted, wait 1 second and try again; if that fails, report to the user that the operation has been aborted 4.2.1230 when configured to display the solar position at a specific date and time, continue to update the world map and re-evaluate spot lifetimes every 2 minutes 4.2.3231 if the user declines to accept the DXLab License, informs the DXLab Launcher that DXView is terminating 4.2.6232 eliminate unnecessary repainting of the world map when a location is selected by clicking on the world map or by specifying a grid square 4.2.6233 make number of queued async lookup requests accessible to other application 4.2.6234 don't clear the Sunrise/Sunset panel grid if it's already clear 4.2.9235 inform the user if the Sunrise/Sunset panel's DX Latitude or Longitude are invalid 4.2.9236 accept ignorable flag in UpdateGrid directive 4.3.2237 prevent an overflow error in DXViewModule.Distance 4.3.3238 prevent a "Subscript out of range" error in DXAtlasModule.EndDisplay 4.3.3239 ensure that DXCC progress update from DXKeeper is properly reflected in Main window's Progress Grid 4.3.6240 ensure that N1MM Rotor band labels are visible 4.3.9241 prevent errorlog.txt file entry "program error in module DXViewModule.GetPrefix, State = 1" 4.4.0242 correct remember the width of the Configuration window's "Override List" tab between operating sessions 4.4.1243 correctly implement the unexpired Override List filter 4.4.1244 on the Configuration window's "Override List" tab, display the ITU column right-aligned 4.4.1244 on the Configuration window's "Override List" tab, make the callsign column movable and resizable 4.4.1245 increase the width of the Override List's TimeZone column from 4 to 8 characters 4.4.1246 de-null newly-created override list fields 4.4.2247 when selecting a new row in the Override List, disable the Save button, and enable the Add and 4.4.2248 prevent the Override List's Valid column from being made visible 4.4.4249 force Continents entered into the Override List to be upper case 4.4.4250 remember the Configuration window's Override width between operating sessions 4.4.5251 prevent the user from modifying an Override List entry's Source 4.4.6252 when converting previously-specified overrides, tolerate "expiration dates" not in YYYY-MM-DD format 4.4.7253 don't allow an expiration date to be specified in a format other than YYYY-MM-DD 4.4.7254 trim legacy override components if they are too large 4.4.7255 ensure that callsigns displayed in the Main window's Search panel are upper case 4.4.8256 when an populating override with location information derived from the specified entity, tolerate nulls in DXCC database fields 4.4.9257 when determining whether an exception specifies a location different than the USAP database, first remove callsign suffixes like /A, /B, /M, /P, /QRP, /MM, /MM1, /MM2, /MM3, /AM, /MOBILE, /AG, /AA, /AE, /ND, /LH, /YL, and /FF 4.5.1258 depressing CTRL while clicking the Override tab's ClubLog button should update new CLub Log Overrides based on their DXCC entity 4.5.1259 update DXCC.txt to show that Kingman Reef is deleted 4.5.2260 prevent modification of entity names in the Override List's Entity column 4.5.5261the Main window's Clear function should clear active stations plotted on DX Atlas4.5.7261 the Main windows Clear function should remove plotted callsigns from the DX Atlas map 4.5.7262 prevent generation of errorlog.txt entry program error 381 in module StatusString.UpdateGrid, State = 1 4.5.8263 if an override specifies an end time greater than 00:00:00, add 1 day to the end date 4.6.0264 retract defect repair 263 4.6.1265 considers an override to end at 23:59:59Z on the specified end date 4.6.1266 prevent errorlog.txt file entry from CallGridDatabaseModule.QueryCallGridDB 4.6.2267 more accurately determine whether DXKeeper, SpotCollector, or WinWarbler are running 4.6.4268 prevent a "Invalid property array index" errorlog entry in DXViewMain.CountryCombo_Click 4.6.5269 allow plotting of QSOs with maritime mobile or aero mobile stations 4.6.7270 correctly interpret position reports from Hygain and Yaesu rotators 4.7.0271 correctly interpret position reports from Hygain rotators 4.7.1272 if the Heading panel's short box is empty, clicking the SP button does not initiate rotation 4.7.2273 if the Heading panel's long box is empty, clicking the LP button does not initiate rotation 4.7.2274 correct Info window layout on startup when rotor control is enabled, Special Callsigns tags, are not enabled, and the GeoMag panel is enabled 4.7.4275 correctly plot short QSOs with small differences between active station longitude and spotting station longitude 4.7.6276 improve accuracy of Lat/Lon to Grid sub-square calculation 4.7.7277 in the World Map window's Plot panel, fully display the "Filtered QSOs" caption 4.7.7278 inform user if unable to interoperate with GoogleMaps 4.7.7279 correct the 4m and 2m labels in the "N1MM Rotor Selection by Band" panel on the Configuration window's "Rotator Control" tab 4.8.0280 prevent an errorlog.txt file entry from being generated by OverrideUpdateReport.Form_Resize 4.8.3281 prevent an errorlog.txt file entry from being generated by DDEServerModule.AsyncEnqueue 4.8.3282 deleting the last number in the Heading panel's short or long textbox clears both the short and long textbox 4.8.4283 when directed to perform a lookup operation, correctly update the callsign's eQSL and LoTW participation shown on DXView's Main window 4.8.4284 correctly terminate when the Main window is minimized 4.8.7285 update the native world map and its overlays 4.8.9286 correct a defect in gray line prediction when the DX location is in all-day darkness or all-day sunlight 4.9.0287 enable plotting of a logged QSO that doesn't specify a DXCC prefix 4.9.0288 with the ARCO panel set to TCP, clicking the Serial button should make the "Serial Port Interface" panel appear 4.9.0289 on startup, only displays the Translations window if that window was displayed when DXView last terminated 4.9.0290 correctly enable Rotator Control on startup 4.9.1291 require the IOTA tag specified in an Override to be 6 characters in length 4.9.2292 prevent errorlog.txt entry "program error 401 in module DDEServer.LinkExecute: Can't show non-modal form when modal form is displayed" 4.9.3293 correctly filter for expired and unexpired overrides 4.9.4294 hide obsolete function erroneously left enabled during debugging 4.9.5295 correctly process CTRL-click in the user-specified digital mode family row of the Main window's Progress table 4.9.7296if the Translations window is minimized when DXView is terminated, minimizes this window when DXView is next started
4.9.7If you have questions or suggestions, please post them on the DXLab Discussion Group.