Contributor: RAY BERNARD
program FREE; { show free disk space and other info }
{$M 32000,0,100000}
{$IFDEF Windows}
This program is intended for DOS real mode only!
{$ELSE}
{$IFDEF DPMI}
Compile for real mode so program does not need RTM.EXE and DPMI16BI.OVL!
{$ENDIF}
{$ENDIF}
{-------------------------------------------------------------------------}
{ }
{ FREE.PAS }
{ ======== }
{ Display drive information and handle phantom floppy drives so }
{ that you don't get the annoying 'insert disk in drive' message. }
{ That means when a non-active phantom floppy drive letter is }
{ listed on the command line, list it's mapped drive and show the }
{ info for the mapped drive, like this: }
{ }
{ Free A: ----------- - same drive as B }
{ Free B: 0 - drive not ready }
{ }
{ See the program Usage display (FREE /?) for more information. }
{ }
{-------------------------------------------------------------------------}
{ This program uses the Object Professional library by }
{ TurboPower Software. }
{-------------------------------------------------------------------------}
{ (c) 1995 by Ray Bernard Consulting and Design. All Rights Reserved. }
{ Portions (c) 1995 by TurboPower Software. All Rights Reserved. }
{-------------------------------------------------------------------------}
{-------------------------------------------------------------------------}
{ ABOUT THIS PROGRAM }
{ ================== }
{ We developed this program to show drive information because it seemed }
{ like we were always adding new drives to our computers, then changing }
{ around the drive contents to optimize their usage. Most of the 1 gig }
{ drives are partitioned into 4 drives for maximum utilization (to make }
{ 16K sectors instead of 32K sectors). Whenever we would rearrange }
{ drive contents, it was helpful to have a utility that would identify }
{ all of a computers local and networked drives, and display the drive }
{ volume label and type of drive. }
{ }
{ Now that most of the kinks are worked out of this program, it seemed }
{ fitting to upload the source code to TurboPower's BBS and CIS forum, }
{ in case others would find it handy. }
{ }
{ This program is provided "AS-IS" without any warranty. Although it is }
{ copyrighted, free use may be made of the source code by any registered }
{ TurboPower software customers. Free use may be made of the compiled }
{ version regardless of TurboPower customer status. }
{ }
{ -Ray Bernard }
{ Ray Bernard Consulting and Design CIS: [73354,3325] }
{ June 17, 995 }
{-------------------------------------------------------------------------}
Uses
DOS,
OpDOS,
OpCrt,
OpString,
OpInline;
type
TPhantomRec = record
DrvLtr,
MapDrvLtr : Char;
end;
var
DriveList : String[26]; { drive letters extracted from command line }
HighDriveSpace,
LowDriveSpace : LongInt; { to hold LOW and HIGH options space values }
ReportOptions : Word; { set per command line options }
PhantomList : array['A'..'Z'] of TPhantomRec; { phantom drive global list }
const
{ Report Options for ShowFreeSpaceAllDrives }
ShowAtOrAbove = 00000001ドル; { /H }
ShowAtOrBelow = 00000002ドル; { /L }
ShowAndPause = 00000004ドル; { /P }
ShowAllDrives = 00000008ドル; { /A }
ShowSize = 00000010ドル; { /C }
ShowType = 00000020ドル; { /T }
ShowVolumeLabel = 00000040ドル; { /V }
ShowFloppies = 00000080ドル; { /F }
MsPerSec = 1000;
Kbyte = 1024;
Megabyte = 1024*Kbyte;
Gigabyte = 1024*Megabyte;
FreeSpacePad = 11; { pad free space number string to 11 spaces }
{ global declarations }
DriveLetterSet : set of Char = ['A'..'Z']; { for parameter checking }
CommandDelimiters : set of char = ['-','/']; { for parameter checking }
PauseDelaySecs : Word = 5; { default seconds to pause after display }
Debug : Boolean = True;
DosVer300 = 0300ドル; {for DOS 3.00}
DosVer320 = 0314ドル; {for DOS 3.20, 14ドル = 20}
procedure ShowUsageAndHalt;
{-Show the usage information for this program }
begin
HighVideo;
Writeln('FREE.EXE - Display drive free space and other information.');
LowVideo;
Writeln('(c) 1995 by Ray Bernard Consulting and Design, CompuServe: 73354,3325.');
Writeln('Portions (c) 1987-1995 by TurboPower Software. All Rights Reserved.');
Writeln('FREE.EXE is "freeware", distributed "as is" and without warranty.');
Writeln;
HighVideo;
Write('Usage: ');
LowVideo;
Writeln('FREE [Drives] [Options]');
Writeln;
HighVideo;
Write('Drives: ');
LowVideo;
Writeln('One or more drive letters, with or without spaces');
Writeln('separating them. If no drives are listed the default drive is assumed.');
Writeln;
HighVideo;
Write('Options: ');
LowVideo;
Writeln('One or more options, separated by spaces. You may');
Writeln('also use the first letter of the option, such as /A for /ALL.');
Writeln('/ALL show all drives (A and B)');
Writeln('/FLOPPY show all drives including A and B');
Writeln('/HIGH n all drives with n or more free space');
Writeln('/LOW n all drives with n or less free space');
Writeln('/PAUSE pause 5 seconds after display or until key pressed');
Writeln('/PAUSE n pause n seconds after the display or until key pressed');
Writeln('/SIZE drive size (formatted capacity)');
Writeln('/TYPE type of drive');
Writeln('/VOLUME show volume label');
Writeln;
Write('Press a key to continue . . .');
if ReadKey #0 then
{do nothing} ;
ClrScr;
Writeln('FREE.EXE - Usage information, page 2.');
Writeln;
Writeln('High and Low free space amounts can be specified in bytes, kbytes, ');
Writeln('megabytes or gigabytes using (K, M or G), with or without commas to separate');
Writeln('thousands. Example: 52,428,800 or 52428800 or 50M for fifty megabytes.');
Writeln;
Writeln('EXAMPLE PROGRAM OUTPUT:');
Writeln;
Writeln('C:>FREE /f /t /v /s');
Writeln('Free A: 0 (Size 0.0MB) - drive not ready');
Writeln('Free B: 0 (Size 0.0MB) - drive not ready');
Writeln('Free C: 48,283,648 (Size 515MB) - local hard drive IDE#1_V1');
Writeln('Free D: 47,218,688 (Size 251MB) - local hard drive IDE#2_V1');
Writeln('Free E: 162,906,112 (Size 519MB) - local hard drive SCSI#1_V1');
Writeln('Free F: 72,351,744 (Size 257MB) - local hard drive IDE#1_V3');
Writeln('Free G: 34,570,240 (Size 257MB) - local hard drive IDE#1_V4');
Writeln('Free H: 35,274,752 (Size 251MB) - local hard drive IDE#2_V2');
Writeln('Free K: 203,807,616 (Size 2GB) - remote or network drive AT_SERV_C');
Writeln('Free O: ----------- - same drive as B');
Writeln('Free N: 34,570,240 (Size 257MB) - logical SUBST or ASSIGN on G IDE#1_V4');
Writeln('Free R: 0 (Size 127MB) - CD-ROM Drive MFCDISC');
Writeln;
Halt;
end;
function IsDriveLocal(Drive : Byte) : Boolean;
{ -Returns TRUE if drive is local.
Drive is the drive number (0 for default, 1 for A:, 2 for B: ...).
NOTE: If DOS 3 or greater is not loaded, it is assumed that the Drive is
local (since DOS has no standard way of knowing under DOS 2).
IsDriveLocal is taken from SHARE.PAS, a unit supplied with TurboPower's
B-Tree Filer. }
var
Regs : Registers;
begin
if OpDos.DosVersion>= DosVer300 then {DOS 3 or greater required}
begin
with Regs do
begin
AX := 4409ドル;
BL := Drive;
MsDos(Regs);
if Odd(Flags) then
IsDriveLocal := True {if error, then assume drive is local}
else
{the drive is local if bit 12 of DX is clear}
IsDriveLocal := not FlagIsSet(DX,1000ドル);
end;
end
else
IsDriveLocal := True; {assume it's local for DOS < 3} end; function DrvNumToLtr(DriveNum : Byte) : Char; {-Return Drive Letter for 1-based Drive Number (A=1, B=2, etc.)} begin DrvNumToLtr := Chr(DriveNum+64); end; function DrvLtrToNum(DriveLetter : Char) : Byte; {-Return 1-based Drive Number (A=1, B=2, etc.) for DriveLetter} begin DrvLtrToNum := Ord(Upcase(DriveLetter))-64; end; function IsDrivePhantom(DriveLetter : Char; var MappedTo : Char) : Boolean; {-Return True if Phantom drive and pass back original drive mapped to. } { Will recognize floppy drives drives reassigned using DRIVER.SYS. } var Regs : Registers; IsPhantom : Boolean; DriveNum : Byte; begin IsPhantom := False; DriveNum := DrvLtrToNum(DriveLetter); if OpDos.DosVersion> DosVer320 then
begin {DOS 3.2 or greater required}
with Regs do
begin
AX := 440ドルE;
BL := DriveNum;
MsDos(Regs);
if Odd(Flags) then
begin
IsPhantom := False; {if error, then assume drive not phantom }
end
else
begin
if AL = 0 then {the drive is not phantom drive if AL = 0}
IsPhantom := False
else
begin
IsPhantom := (AL DriveNum);
if IsPhantom then
MappedTo := DrvNumToLtr(AL);
end;
end;
end;
end;
IsDrivePhantom := IsPhantom;
end; { IsDrivePhantom }
function IsListedAsPhantom(DriveLetter : Char) : Boolean;
{-Refer to this program's global PhantomList variable }
begin
IsListedAsPhantom := PhantomList[DriveLetter].DrvLtr = DriveLetter;
end;
procedure RestoreOutputRedirection;
{-Return Write and Writeln to Standard I/O to allow }
{ redirection of program output to file or printer }
begin
{ undo OpCrt's assignment of Output to CRT }
Close(Output);
Assign(Output,'');
Rewrite(Output);
end;
function NumFloppies : Byte;
{-Return the number of floppy drives installed per DOS "List of Lists" }
var
Equipment : Byte;
begin
Equipment := mem[0040ドル:0010ドル];
if (equipment and 0001ドル) = 1 then
NumFloppies := ((Equipment shr 6) and 0003ドル)+1
else
NumFloppies := 0;
end;
procedure HaltWithMessage(Message : String);
{-Display Message and halt }
begin
Writeln(Message);
Halt;
end;
function InsertCommas(S : String) : String;
{-Add commas to string for thousands. Work from the end }
{ of the string exit on the first space encountered, to }
{ be able to handle strings like: 'TOTAL: 1,000'. }
var
I : Word;
Len : Word;
begin
Len := Length(S);
I := Len;
while I> 1 do begin
if (Len+1-I) mod 3 = 0 then
if S[I-1] = ' ' then
Break
else
insert(',', S, I);
dec(I);
end;
InsertCommas := S;
end;
procedure GetAndSavePhantomInfo(DriveLetter : Char);
{-If DriveLetter is a Phantom drive, set data in PhantomList }
var
MapCh : Char;
begin
if IsDrivePhantom(DriveLetter,MapCh) then
with PhantomList[DriveLetter] do
begin
DrvLtr := DriveLetter;
MapDrvLtr := MapCh;
end;
end;
function DiskTypeString(DriveLetter : Char) : String;
{-Return the disk class information as a string with leading space & dash. }
{ Checks the global variable PhantomList for phantom drive info, and exit }
{ for phantom drive without calling GetDiskClass to avoid disk hit. }
var
DiskType : DiskClass;
DriveNum : Byte;
SubDriveCh : Char;
DTStr : String;
begin
DriveNum := DrvLtrToNum(DriveLetter);
if IsListedAsPhantom(DriveLetter) then
begin
DiskTypeString := ' - same drive as '+PhantomList[DriveLetter].MapDrvLtr;
Exit;
end;
DiskType := GetDiskClass(DriveLetter,SubDriveCh);
case DiskType of
Floppy360 : DTStr := ' - 360KB, 5.25" diskette';
Floppy720 : DTStr := ' - 720KB, 3.50" diskette';
Floppy12 : DTStr := ' - 1.2MB, 5.25" diskette';
Floppy144 : DTStr := ' - 1.44MB, 3.50" diskette';
OtherFloppy : DTStr := ' - unlised diskette type';
Bernoulli : DTStr := ' - Bernouli drive';
HardDisk : DTStr := ' - local hard drive';
RamDisk : DTStr := ' - RAM drive';
SubstDrive : DTStr := ' - logical SUBST or ASSIGN on '+
SubDriveCh;
UnknownDisk : DTStr := ' - unlisted disk type';
InvalidDrive : if not IsDriveLocal(DriveNum) then
DTStr := ' - remote or network drive'
else
DTStr := ' - drive not ready';
NovellDrive : DTStr := ' - Novelle network drive';
CDRomDisk : DTStr := ' - CD-ROM drive';
else
{ Trap for GetDiskClass update to include new types}
{ before this routine is revised, and ensure that }
{ a function result is always assigned. }
DTStr := 'unrecognized disk type';
end; {case}
DiskTypeString := DTStr;
end;
function DiskCapacity(DriveLetter : char) : longint;
{-Return the disk capacity in number of bytes for the specified drive. }
var
DriveNum : byte;
BytesPerCluster,
AvailClusters,
TotalClusters,
SectorsPerCluster,
BytesPerSector : word;
TotalBytes : longint;
begin
DiskCapacity := 0;
if IsListedAsPhantom(DriveLetter) then
Exit;
DriveNum := DrvLtrToNum(DriveLetter);
if GetDiskInfo(DriveNum,AvailClusters,TotalClusters,
BytesPerSector,SectorsPerCluster) then
begin
BytesPerCluster := LongInt(SectorsPerCluster) * BytesPerSector;
DiskCapacity := LongInt(TotalClusters) * BytesPerCluster;
end;
end; { DiskCapacity }
function DiskCapacityString(DriveLetter : Char) : String;
{-Return disk capacity info in megabytes or gigabytes formatted with commas }
var
DiskCap : LongInt;
TempStr : String;
begin
DiskCap := DiskCapacity(DriveLetter);
if DiskCap>= Gigabyte then
TempStr := Long2Str(DiskCap div Gigabyte)+'GB'
else
if DiskCap> 9*Megabyte then
TempStr := InsertCommas(Long2Str(DiskCap div Megabyte))+'MB'
else
TempStr := Long2Str(DiskCap div Megabyte)+'.'+
copy(Long2Str(DiskCap mod Megabyte),1,1)+'MB';
DiskCapacityString := TempStr;
end;
function AvailableDriveSpace(DriveLetter : char) : longint;
{-Return the number of bytes free on specified drive}
var
DriveNum : byte;
BytesPerCluster,
AvailClusters,
TotalClusters,
SectorsPerCluster,
BytesPerSector : word;
TotalBytes : longint;
begin
AvailableDriveSpace := 0;
if IsListedAsPhantom(DriveLetter) then
Exit;
DriveNum := DrvLtrToNum(DriveLetter);
if GetDiskInfo(DriveNum,AvailClusters,TotalClusters,
BytesPerSector,SectorsPerCluster) then
begin
BytesPerCluster := LongInt(SectorsPerCluster) * BytesPerSector;
AvailableDriveSpace := LongInt(AvailClusters) * BytesPerCluster;
end;
end; { AvailableDriveSpace }
function DriveInfoString(DriveLetter : Char) : String;
{-Return the formatted drive information for DriveLetter. }
{ Use global variable ReportOptions to determine what data }
{ should be inlcuded in returned string. Return a nul }
{ string if the drive's infor should not be displayed }
{ per high or low options. }
var
N : Byte;
InfoStr : String;
ProcResult : Word;
VolumeStr : VolumeNameStr;
FreeSpace : LongInt;
ShowThisDrive : Boolean;
const
SpacePadWidth = 13;
begin
InfoStr := 'Free '+DriveLetter+': ';
if not IsListedAsPhantom(DriveLetter) then
begin
FreeSpace := AvailableDriveSpace(DriveLetter);
InfoStr := InfoStr +
LeftPad(InsertCommas(Long2Str(FreeSpace)),SpacePadWidth);
end
else
begin
InfoStr := InfoStr + ' -----------';
FreeSpace := 0;
end;
if FlagIsSet(ReportOptions,ShowSize) then
if not IsListedAsPhantom(DriveLetter) then
InfoStr := InfoStr + ' (Size '+ DiskCapacityString(DriveLetter) + ')'
else
InfoStr := InfoStr + ' (Size -----)';
if FlagIsSet(ReportOptions,ShowType) then
InfoStr := InfoStr + DiskTypeString(DriveLetter);
if FlagIsSet(ReportOptions,ShowVolumeLabel) then
if not IsListedAsPhantom(DriveLetter) then
begin
ProcResult := GetVolumeLabel(DriveLetter,VolumeStr);
if ProcResult = 0 then
if Length(VolumeStr)> 0 then
InfoStr := InfoStr + ' '+VolumeStr
else
InfoStr := InfoStr + ' no label';
end;
{ handle high and low disk space options }
if FlagIsSet(ReportOptions,ShowAtOrAbove) or
FlagIsSet(ReportOptions,ShowAtOrBelow) then
begin { allow both settings combined }
ShowThisDrive := ( (FlagIsSet(ReportOptions,ShowAtOrAbove) and
(FreeSpace>= HighDriveSpace)) or
(FlagIsSet(ReportOptions,ShowAtOrBelow) and
(FreeSpace <= LowDriveSpace)) ); end else ShowThisDrive := True; if not ShowThisDrive then DriveInfoString := '' else DriveInfoString := InfoStr; end; procedure DisplayDriveInfoString(DriveLetter : Char); {-Writeln DriveInfoString's result for DriveLetter if not a nul string } var DisplayStr : String; begin DisplayStr := DriveInfoString(DriveLetter); if Length(DisplayStr)> 0 then
Writeln(DisplayStr);
end;
procedure DisplayDrivesInfo;
{-Display the info for all drives in DriveList, checking ReportOptions }
{ for display settings. }
{ Before calling DriveInfoString, make all calls to GetPhantomInfo. }
{ DriveInfoString's call to GetDiskInfo will cause a disk in each drive, }
{ making any phantom drive current and thus undetectable by our methods. }
{ If a single drive was specified on the command line, and it turns out }
{ to be a phantom drive, show the drive info for the mapped drive, too. }
var
N : Byte;
begin
{ build global list of phantom drive maps }
for N := 1 to Length(DriveList) do
GetAndSavePhantomInfo(DriveList[N]);
{ now get and display drive information }
if (Length(DriveList) = 1) then
begin { hangle single specified phantom drive }
DisplayDriveInfoString(DriveList[1]);
if IsListedAsPhantom(DriveList[1]) then
DisplayDriveInfoString(PhantomList[DriveList[1]].MapDrvLtr);
end
else { show drive info for all listed drives }
for N := 1 to Length(DriveList) do
DisplayDriveInfoString(DriveList[N]);
{ pause if option enabled }
if FlagIsSet(ReportOptions,ShowAndPause) then
Delay(PauseDelaySecs*MsPerSec);
end;
function AllValidDrivesList : String;
{-Return a string containing drive letters of all valid drives}
var
DriveLetter : Char;
TempDrivesList : String;
FirstDrive : Char;
const
LastDrive = 'Z';
begin
TempDrivesList := '';
if FlagIsSet(ReportOptions,ShowFloppies) then
FirstDrive := 'A'
else
FirstDrive := 'C';
for DriveLetter := FirstDrive to LastDrive do
if ValidDrive(DriveLetter) then
TempDrivesList := TempDrivesList + DriveLetter
else
{ primary floppies show invalid when last access was via the the Phantom }
{ drive, so check DOS equipment list for floppies by calling NumFloppies }
if (DriveLetter in ['A','B']) and (NumFloppies> 0) then
TempDrivesList := TempDrivesList + DriveLetter;
AllValidDrivesList := TempDrivesList;
end;
function StripCommas(S : String) : String;
{-Remove any commas from S and return as result }
var
LenS : Byte absolute S;
P : Byte;
begin
for P := LenS downto 1 do
if S[P] = ',' then
Delete(S,P,1);
StripCommas := S;
end;
procedure ParseCommandLine;
{-Parse command line to get drive list and options }
{ First, check to see if a parameter is a drive letter or list of them. }
{ If so, put the letter or letters in the drive list. }
{ If not a drive letter, the parameter should be a command option. }
{ Process the command option, or ignore if not a valid option (could be }
{ an option parameter or an invalid option). }
var
ChPos,Count : Byte;
TempDelaySecs : Word;
Param,Param2 : String;
ParamLen : Byte absolute Param;
Param2Len : Byte absolute Param2;
HLChar : Char; { /HIGH, /LOW: K = Kbytes, M = Megabytes, G = Gig }
const
HLCharSet : set of Char = ['G','K','M'];
begin
{ initialize variables }
FillChar(PhantomList, SizeOf(PhantomList), #0);
ReportOptions := 0;
HighDriveSpace := 0;
LowDriveSpace := 0;
for Count := 1 to ParamCount do
begin
Param := StUpCase(ParamStr(Count));
if Param[1] in DriveLetterSet then
begin
for ChPos := 1 to ParamLen do { for drives listed w/no spacing }
if Pos(Param[ChPos],DriveList) = 0 then { correct user error }
if ValidDrive(Param[ChPos]) then
DriveList := DriveList + Param[ChPos]
else
{ primary floppies show invalid when last access was via the the Phantom }
{ drive, so check DOS equipment list for floppies by calling NumFloppies }
if (Param[ChPos] in ['A','B']) and (NumFloppies> 0) then
DriveList := DriveList + Param[ChPos];
end
else
{ 1st char should be command delimiter }
{ 2nd char should indicate option }
if Param[1] in CommandDelimiters then
begin
case Param[2] of
'A' : SetFlag(ReportOptions,ShowAllDrives);
'F' : SetFlag(ReportOptions,ShowFloppies);
'H' : begin
HLChar := #255; { to check if set }
if ParamCount <= Count then HaltWithMessage('specify drive space with /HIGH option'); { check for G, K or M } Param2 := StUpCase(ParamStr(Count+1)); if Param2[Param2Len] in HLCharSet then begin HLChar := Param2[Param2Len]; Delete(Param2,Param2Len,1); end; { validate free space number } if not Str2Long(StripCommas(Param2),HighDriveSpace) then HaltWithMessage('specify amount of drive space with /HIGH option') else { handle G, K or M } if HLChar #255 then
begin
case HLChar of
'G' : HighDriveSpace := HighDriveSpace * Gigabyte;
'K' : HighDriveSpace := HighDriveSpace * Kbyte;
'M' : HighDriveSpace := HighDriveSpace * Megabyte;
end; {case}
end;
SetFlag(ReportOptions,ShowAtOrAbove);
SetFlag(ReportOptions,ShowAllDrives);
end;
'L' : begin
HLChar := #255; { to check if set }
if ParamCount <= Count then HaltWithMessage('specify drive space with /LOW option'); { check for G, K or M } Param2 := StUpCase(ParamStr(Count+1)); if Param2[Param2Len] in HLCharSet then begin HLChar := Param2[Param2Len]; Delete(Param2,Param2Len,1); end; { validate free space number } if not Str2Long(StripCommas(Param2),LowDriveSpace) then HaltWithMessage('specify amount of drive space with /LOW option') else { handle G, K or M } if HLChar #255 then
begin
case HLChar of
'G' : LowDriveSpace := LowDriveSpace * Gigabyte;
'K' : LowDriveSpace := LowDriveSpace * Kbyte;
'M' : LowDriveSpace := LowDriveSpace * Megabyte;
end; {case}
end;
SetFlag(ReportOptions,ShowAtOrBelow);
SetFlag(ReportOptions,ShowAllDrives);
end;
'P' : begin
SetFlag(ReportOptions,ShowAndPause);
if Count < ParamCount then { next param could be delay } if Str2Word(ParamStr(Count+1),TempDelaySecs) then PauseDelaySecs := TempDelaySecs; end; 'S' : SetFlag(ReportOptions,ShowSize); 'T' : SetFlag(ReportOptions,ShowType); 'V' : SetFlag(ReportOptions,ShowVolumeLabel); '?' : ShowUsageAndHalt; end; { case } end; { if Param[1] in CommandDelimiters } end; { for Count := 1 to ParamCount } if FlagIsSet(ReportOptions,ShowAllDrives) or FlagIsSet(ReportOptions,ShowFloppies) then DriveList := AllValidDrivesList; end; { ParseCommandLine } begin { FREE } RestoreOutputRedirection; if ParamCount> 0 then
ParseCommandLine;
if Length(DriveList) = 0 then { if no drives on command line }
DriveList := DefaultDrive; { default to current the drive }
DisplayDrivesInfo;
end. { FREE }