SHARE
    TWEET
    Guest User

    dmesg_a20-olinuxino-lime2

    a guest
    Mar 9th, 2015
    338
    0
    Never
    Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
    text 6.86 KB | None | 0 0
    1. Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2. 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
    3. The NetBSD Foundation, Inc. All rights reserved.
    4. Copyright (c) 1982, 1986, 1989, 1991, 1993
    5. The Regents of the University of California. All rights reserved.
    6. NetBSD 7.99.5 (CUBIEBOARD.201502210800Z) #0: Sat Feb 21 09:39:18 UTC 2015
    7. [email protected]:/home/builds/ab/HEAD/evbarm-earmv7hf/201502210800Z-obj/home/source/ab/HEAD/src/sys/arch/evbarm/compile/CUBIEBOARD
    8. total memory = 1024 MB
    9. avail memory = 1008 MB
    10. sysctl_createv: sysctl_create(machine_arch) returned 17
    11. timecounter: Timecounters tick every 10.000 msec
    12. mainbus0 (root)
    13. cpu0 at mainbus0 core 0: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
    14. cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
    15. cpu0: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0
    16. cpu0: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211
    17. cpu0: pfr: [0]=0x1131 [1]=0x11011
    18. cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
    19. cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
    20. cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
    21. vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
    22. vfp0: mvfr: [0]=0x10110222 [1]=0x11111111
    23. cpu1 at mainbus0 core 1
    24. armperiph0 at mainbus0
    25. armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (151 valid)
    26. armgic0: 32 Priorities, 128 SPIs, 7 PPIs, 16 SGIs
    27. armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (24000 kHz)
    28. armgtmr0: interrupting on irq 27
    29. timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500
    30. awinio0 at mainbus0: A20 (0x1651)
    31. awingpio0 at awinio0: [satapwren >PC3] [usb0drv >PC17] [usb0iddet <PH4] [usb0vbusdet >PH5] [usb1drv >PH6] [usb2drv >PH3] [status-led1 >PH2] [mmc0detect <PH1]
    32. awindma0 at awinio0: DMA
    33. awindma0: interrupting on irq 59
    34. awincnt0 at awinio0
    35. timecounter: Timecounter "CNT64" frequency 24000000 Hz quality 900
    36. com0 at awinio0 port 0: ns16550a, working fifo
    37. com0: console
    38. awindebe0 at awinio0 port 0: Display Engine Backend (BE0)
    39. awintcon0 at awinio0 port 0: LCD/TV timing controller (TCON0)
    40. awinhdmi0 at awinio0: HDMI 1.3
    41. awinhdmi0: display connected
    42. awinhdmi0: DVI mode (auto-detected)
    43. genfb0 at awindebe0: switching to framebuffer console
    44. genfb0: framebuffer at 0xca000000, size 1680x1050, depth 32, stride 6720
    45. wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
    46. wsmux1: connecting to wsdisplay0
    47. wsdisplay0: screen 1-3 added (default, vt100 emulation)
    48. awinwdt0 at awinio0: default period is 10 seconds
    49. awinrtc0 at awinio0: RTC
    50. awinusb0 at awinio0 port 0
    51. ohci0 at awinusb0: OHCI USB controller
    52. ohci0: OHCI version 1.0
    53. usb0 at ohci0: USB revision 1.0
    54. ohci0: interrupting on irq 96
    55. ehci0 at awinusb0: EHCI USB controller
    56. ehci0: EHCI version 1.0
    57. ehci0: companion controller, 1 port each: ohci0
    58. usb1 at ehci0: USB revision 2.0
    59. ehci0: interrupting on irq 71
    60. awinusb1 at awinio0 port 1
    61. ohci1 at awinusb1: OHCI USB controller
    62. ohci1: OHCI version 1.0
    63. usb2 at ohci1: USB revision 1.0
    64. ohci1: interrupting on irq 97
    65. ehci1 at awinusb1: EHCI USB controller
    66. ehci1: EHCI version 1.0
    67. ehci1: companion controller, 1 port each: ohci1
    68. usb3 at ehci1: USB revision 2.0
    69. ehci1: interrupting on irq 72
    70. motg0 at awinio0: OTG
    71. motg0: interrupting at irq 70
    72. motg0: no restrict gpio found
    73. motg0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
    74. usb4 at motg0: USB revision 2.0
    75. awinmmc0 at awinio0 port 0: SD3.0 (DMA)
    76. awinmmc0: failed to reserve GPIO "status-led2"
    77. awinmmc0: interrupting at irq 64
    78. ahcisata0 at awinio0: AHCI SATA controller
    79. ahcisata0: interrupting on irq 88
    80. ahcisata0: ignoring broken port multiplier support
    81. ahcisata0: AHCI revision 1.10, 1 port, 32 slots, CAP 0x6724ff80<CCCS,PSC,SSC,PMD,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ>
    82. atabus0 at ahcisata0 channel 0
    83. awiniic0 at awinio0 port 0: Marvell TWSI controller
    84. awiniic0: interrupting on irq 39
    85. iic0 at awiniic0: I2C bus
    86. awge0 at awinio0: Gigabit Ethernet Controller
    87. awge0: interrupting on irq 117
    88. awge0: reset timed out
    89. awinac0 at awinio0: CODEC
    90. awinac0: failed to reserve GPIO "audiopactrl"
    91. audio0 at awinac0: full duplex, playback, capture, mmap, independent
    92. awinhdmiaudio0 at awinio0: HDMI 1.3
    93. audio1 at awinhdmiaudio0: half duplex, playback, mmap
    94. awinnand0 at awinio0
    95. awinir0 at awinio0 port 0: IR
    96. awinir0: interrupting on irq 37
    97. cir0 at awinir0
    98. gpio0 at awingpio0: 18 pins
    99. gpio1 at awingpio0: 25 pins
    100. gpio2 at awingpio0: 28 pins
    101. gpio3 at awingpio0: 12 pins
    102. gpio4 at awingpio0: 12 pins
    103. gpio5 at awingpio0: 28 pins
    104. gpio6 at awingpio0: 22 pins
    105. timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
    106. cpu1: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
    107. cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
    108. cpu1: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0
    109. cpu1: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211
    110. cpu1: pfr: [0]=0x1131 [1]=0x11011
    111. cpu1: 32KB/32B 2-way L1 VIPT Instruction cache
    112. cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
    113. cpu1: 256KB/64B 8-way write-through L2 PIPT Unified cache
    114. vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
    115. vfp1: mvfr: [0]=0x10110222 [1]=0x11111111
    116. sdmmc0 at awinmmc0
    117. uhub0 at usb0: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    118. uhub0: 1 port with 1 removable, self powered
    119. uhub1 at usb1: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    120. uhub1: 1 port with 1 removable, self powered
    121. uhub2 at usb2: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    122. uhub2: 1 port with 1 removable, self powered
    123. uhub3 at usb3: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    124. uhub3: 1 port with 1 removable, self powered
    125. uhub4 at usb4: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
    126. uhub4: 1 port with 1 removable, self powered
    127. ld0 at sdmmc0: <0x1b:0x534d:00000:0x10:0x89e23086:0x0ec>
    128. ld0: 7655 MB, 3888 cyl, 64 head, 63 sec, 512 bytes/sect x 15677440 sectors
    129. ld0: 4-bit width, bus clock 50.000 MHz
    130. ehci1: handing over low speed device on port 1 to ohci1
    131. rum0 at uhub1 port 1
    132. rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
    133. rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0e:2e:e3:a6:43
    134. rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    135. rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    136. boot device: ld0
    137. root on ld0a dumps on ld0b
    138. root file system type: ffs
    139. kern.module.path=/stand/evbarm/7.99.5/modules
    140. WARNING: preposterous TOD clock time
    141. WARNING: using filesystem time
    142. WARNING: CHECK AND RESET THE DATE!
    143. uhidev0 at uhub2 port 1 configuration 1 interface 0
    144. uhidev0: Cherry Mikroschalter My6000 keyboard, rev 2.00/1.00, addr 2, iclass 3/1
    145. ukbd0 at uhidev0: 8 modifier keys, 6 key codes
    146. wskbd0 at ukbd0: console keyboard, using wsdisplay0
    147. wsdisplay0: screen 4 added (default, vt100 emulation)
    Advertisement
    Add Comment
    Please, Sign In to add comment
    Public Pastes
    We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
    Not a member of Pastebin yet?
    Sign Up, it unlocks many cool features!

    AltStyle によって変換されたページ (->オリジナル) /