Hello,
I am using Xen 4 with Debian Squeeze and trying
to virtualize a Windows 2008 Server machine. I've followed these
instructions:
http://alex.mordue.co.uk/blog/?p=85
But once i do: xm create windows2008.cfg
The domU tries
to start but then dies in few seconds with these errors:
in
xend.log:
[2011年06月18日 14:28:04 2254] INFO (XendDomain:1206)
Domain windows2008 (28) unpaused.
[2011年06月18日 14:28:37 2254] INFO
(XendDomainInfo:2088) Domain has shutdown: name=windows2008 id=28
reason=poweroff.
[2011年06月18日 14:28:37 2254] DEBUG
(XendDomainInfo:3053) XendDomainInfo.destroy: domid=28
[2011年06月18日
14:28:40 2254] DEBUG (XendDomainInfo:2411) Destroying device model
[2011年06月18日 14:28:40 2254] INFO (image:615) windows2008 device model
terminated
[2011年06月18日 14:28:40 2254] DEBUG (XendDomainInfo:2418)
Releasing devices
[2011年06月18日 14:28:40 2254] DEBUG
(XendDomainInfo:2424) Removing vif/0
In
qemu-dm-windows2008.log:
[...]
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state
of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/28/xen_extended_power_mgmt): read
error
medium change watch on `hdc' (index: 2):
/opt/isos/en_windows_server_2008_r2_standard_x64_dvd.iso
I/O request
not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
Log-dirty:
no command yet.
xs_read(/local/domain/28/log-throttling): read
error
qemu: ignoring not-understood drive
`/local/domain/28/log-throttling'
medium change watch on
`/local/domain/28/log-throttling' - unknown device, ignored
cirrus
vga map change while on lfb mode
[...]
And this is my
configuration file:
name = 'windows2008'
kernel =
'/usr/lib/xen-4.0/boot/hvmloader'
builder = 'hvm'
device_model =
'/usr/lib/xen-4.0/bin/qemu-dm'
memory = 8192
shadow_memory =
8
vcpus=1
acpi=1
apic=1
# Choose a better
mac address
#vif = [ 'bridge=eth0, mac=00:16:3E:9D:3E:22' ]
vif
= [ 'bridge=eth2, mac=00:16:3E:9D:3E:22, ip=192.168.10.7' ]
## The
VM has the following block devices
# - A boot disk with a
single partition for the OS, swap, and programs
# - The
installation DVD
# - The PV drivers CD
disk = [
'phy:/dev/eulervg/WindowsERP-SO-disk,sda,w',
'phy:/dev/eulervg/WindowsERP-data-disk,hdb,w',
'file:/opt/isos/en_windows_server_2008_r2_standard_x64_dvd.iso,hdc:cdrom,r']
# Boot from the DVD firstboot='dc'
#boot=''
usbdevice='tablet'
## Use VNC for the console.
vnc=1
vncunused=0
vnclisten = '0.0.0.0'
vncdisplay=2
vncconsole=1
vncpasswd='xxx'
#vncviewer=1
vncviewer=0
sdl=0
stdvga=0
serial='pty'
ne2000
= "0"
on_reboot = 'restart'
on_crash =
'restart'
I have tried with other configuration files that i
have found in Internet but none of them have worked. I don't know wheter
it is a misconfiguration or a bug ?
Any help would be
appreciated.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users