Hi, Thank firstly
so where the vif0.0?
Is the output of “brctl show ” correct?
bridge name bridge id STP enabled interfaces
eth0 8000.0015c5eb96c3 no peth0
virbr0 8000.000000000000 yes
发件人: Guido Hecken [mailto:guido.hecken@xxxxxxxxxxxxx]
发送时间: 2011年1月26日 20:50
收件人: Chu Qiu; xen-users@xxxxxxxxxxxxxxxxxxx
主题: AW: [Xen-users] missing vif.0 port after install xen4+centos5
Hi,
I think the standard bridge in xen 4.x is now called "eth0".
Guido
Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Chu Qiu
Gesendet: Mittwoch, 26. Januar 2011 13:40
An: xen-users@xxxxxxxxxxxxxxxxxxx
Betreff: [Xen-users] missing vif.0 port after install xen4+centos5
Hi !
I have install the xen4+centos5 on my server following the post of
the kernel version is 2.6.32.27 which is download from git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git
But after I reboot the server ,and run the “ifconfig”, whose output likes the following
[root@localhost scripts]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:C5:EB:96:C3
inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:feeb:96c3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17897 errors:0 dropped:0 overruns:0 frame:0
TX packets:17091 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2009054 (1.9 MiB) TX bytes:3375426 (3.2 MiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8898 errors:0 dropped:0 overruns:0 frame:0
TX packets:8898 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3501148 (3.3 MiB) TX bytes:3501148 (3.3 MiB)
peth0 Link encap:Ethernet HWaddr 00:15:C5:EB:96:C3
inet6 addr: fe80::215:c5ff:feeb:96c3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:17904 errors:0 dropped:0 overruns:0 frame:0
TX packets:17242 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2363666 (2.2 MiB) TX bytes:3459069 (3.2 MiB)
Interrupt:16 Memory:f8000000-f8012800
virbr0 Link encap:Ethernet HWaddr 26:70:02:2E:12:AD
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:2714 (2.6 KiB)
and the output of “brctl show ” is:
bridge name bridge id STP enabled interfaces
eth0 8000.0015c5eb96c3 no peth0
virbr0 8000.000000000000 yes
and the output of “xm list” is
[root@localhost scripts]# xm list
Name ID Mem VCPUs State Time(s)
Domain-0 0 512 4 r----- 1900.3
the libvirtd’s version is 0.8.4
I cannot find the network bridge “xenbr0” and “vif0” , so Did anyone have met such problem?
Please do me a favour!
Thank you very much!
Chqiu
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | AW: [Xen-users] missing vif.0 port after install xen4+centos5 , Guido Hecken |
|---|---|
| Next by Date: | Re: [Xen-users] About: rm -f /bin /sh , J. Roeleveld |
| Previous by Thread: | AW: [Xen-users] missing vif.0 port after install xen4+centos5 , Guido Hecken |
| Next by Thread: | Re: 答复: [Xen-users] missing vif.0 port after install xen4+centos5 , Fajar A. Nugraha |
| Indexes: | [Date] [Thread] [Top] [All Lists] |