On Fri, Dec 3, 2010 at 6:13 PM, Konrad Rzeszutek Wilk
<konrad.wilk@xxxxxxxxxx> wrote:
On Fri, Dec 03, 2010 at 05:58:23PM -0500, David Gonzalez wrote:
> Hi,
>
> Yeah, there wre lots of them so I just did mkinitrd --builton=ohci ... and
You probably missed your storage driver then:
http://wiki.xensource.com/xenwiki/2.6.18-to-2.6.31-and-higher
> all modules that it said it couldn't find as reading on the tutorialas it
> said that it was safe tyo ignore usb errors as they are built into the
USB ones are, but not if it is your driver for your SATA disk.
Well in fact there's the problem I boot my CD from an external USB enclosure with a 160GB HDD so I'm guessing that must be one of the issues, though I don't exactly know the parameter to solve it when creating the initrd do i use --preload= --builtin=
my lsmod looks like this. tho I stripped some ip_* and dm_* modules which are no relevant
Module Size Used by
loop 48593 2
pciback 64977 0
netloop 40129 0
netbk 130177 0 [permanent]
blktap 151653 6 [permanent]
blkbk 56465 0 [permanent]
ipv6 435617 20
xfrm_nalgo 43333 1 ipv6
bridge 92145 0
scsi_dh 42177 1 dm_multipath
video 53197 0
backlight 39873 1 video
sbs 49921 0
power_meter 47053 0
i2c_ec 38593 1 sbs
dell_wmi 37601 0
wmi 41985 1 dell_wmi
button 40545 0
battery 43849 0
asus_acpi 50917 0
ac 38729 0
lp 47121 0
sg 70249 0
i2c_amd8111 39105 0
i2c_amd756 40389 0
i2c_core 56641 3 i2c_ec,i2c_amd8111,i2c_amd756
k8temp 39105 0
k8_edac 50693 0
pcspkr 36289 0
hwmon 36553 2 power_meter,k8temp
tg3 161225 0
amd_rng 36041 0
edac_mc 60321 1 k8_edac
parport_pc 62313 1
parport 73293 2 lp,parport_pc
serial_core 56385 0
shpchp 70637 0
usb_storage 122529 2
sd_mod 56513 3
scsi_mod 197209 4 scsi_dh,sg,usb_storage,sd_mod
ext3 168657 5
jbd 94513 1 ext3
uhci_hcd 57561 0
ohci_hcd 56437 0
ehci_hcd 66253 0
Also strange that after I build my kernel and try mkinitrd this shows up
[root@vmhost linux-2.6-xen]# mkinitrd --builtin=usb-storage --preload=usb-storage --builtin=ohci_hcd --builtin=uhci-hcd --builtin=ohci-hcd --builtin=ehci-hcd --preload=ohci_hcd --preload=ehci-hcd --preload=ohci-hcd --preload=uhci-hcd -v -f /boot/initrd-2.6.32.26-dom0.img 2.6.32.26-dom0
Creating initramfs
module usb-storage assumed to be built in
module ohci_hcd assumed to be built in
module ehci-hcd assumed to be built in
module ohci-hcd assumed to be built in
module uhci-hcd assumed to be built in
module ehci-hcd assumed to be built in
module ohci-hcd assumed to be built in
module uhci-hcd assumed to be built in
Looking for deps of module ext3
Looking for driver for device sda2
Looking for deps of module usb:v152Dp2338d0100dc00dsc00dp00ic08isc06ip50: usb-storage
module usb-storage assumed to be built in
Looking for deps of module pci:v00001022d00007464sv0000161Fsd00003016bc0Csc03i10
module ohci_hcd assumed to be built in
Looking for deps of module pci:v00001022d00007460sv00000000sd00000000bc06sc04i00: shpchp
Looking for deps of module shpchp
Looking for deps of module ide-disk
Looking for deps of module dm-mod
Looking for deps of module dm-mirror
Looking for deps of module dm-zero
Looking for deps of module dm-snapshot
Looking for deps of module dm-mem-cache
Looking for deps of module dm-region_hash
Looking for deps of module dm-message
Looking for deps of module dm-raid45
Using modules: /lib/modules/2.6.32.26-dom0/kernel/drivers/pci/hotplug/shpchp.ko
/sbin/nash -> /tmp/initrd.L21873/bin/nash
/sbin/insmod.static -> /tmp/initrd.L21873/bin/insmod
copy from `/lib/modules/2.6.32.26-dom0/kernel/drivers/pci/hotplug/shpchp.ko' [elf64-x86-64] to `/tmp/initrd.L21873/lib/shpchp.ko' [elf64-x86-64]
/sbin/lvm.static -> /tmp/initrd.L21873/bin/lvm
/sbin/dmraid.static -> /tmp/initrd.L21873/bin/dmraid
/sbin/kpartx.static -> /tmp/initrd.L21873/bin/kpartx
Adding module shpchp
And the image created sucessfully so I'll test and take the pic and get back to you.
Thanks.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel